Skip to main content
320Pcs M3 Motherboard Standoffs&Screws&Nuts Kit, Hex Male-Female Brass Spacer Standoffs, Laptop Screws for DIY Computer Build, Electronic Projects, Raspberry Pi, Circuit Board etc.
Csdtylh

Csdtylh 320Pcs M3 Motherboard Standoffs&Screws&Nuts Kit

Bottom line: The Csdtylh 320Pcs M3 Motherboard Standoffs&Screws&Nuts Kit: 320 pieces covers a full build plus spares; main trade-off: M3 thread only, no M2, M2.5, or 6-32 sizes.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For PC and retro-hardware cleaning and maintenance tools, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 320 pieces covers a full build plus spares
  • ✓ Hex male-female brass standoffs stack for custom heights
  • ✓ Sorted compartment box keeps sizes separated
  • ✓ Fits Raspberry Pi, PCBs, and desktop motherboards

Cons

  • ✗ M3 thread only, no M2, M2.5, or 6-32 sizes
  • ✗ Brass is softer than steel and strips if overtorqued
  • ✗ Listing does not specify how many of each length
  • ✗ Compartment box lids can pop open in a toolbag

Manufacturer description

The Csdtylh 320-piece M3 motherboard standoff kit covers the fastener gap that turns a straightforward DIY computer build into a hardware-store run. You get M3 brass hex male-female spacer standoffs, screws, and nuts sorted into a labeled compartment box, so you can pull the right length instead of test-fitting five. The brass threads are cut clean and burr-free, which matters when you are seating a motherboard tray or stacking a Raspberry Pi HAT and cannot afford to cross-thread a post. Coverage runs across desktop motherboards, laptop chassis screws, bare PCBs, single-board computers, and…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Csdtylh 320Pcs M3 Motherboard Standoffs&Screws&Nuts Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "320 pieces covers a full build plus spares"; the main trade-off is "M3 thread only, no M2, M2.5, or 6-32 sizes". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many pieces come in this M3 standoff kit?

320 pieces total, combining M3 hex male-female brass spacer standoffs, screws, and nuts. The listing does not break out the count per individual length, so check the product page for the current assortment chart.

Will these standoffs work with a Raspberry Pi?

Yes. Raspberry Pi boards use M3 mounting holes, and the kit is specifically listed for Raspberry Pi, PCBs, and associated components alongside desktop motherboards.

What are the standoffs made of?

Brass, in a hex male-female spacer design. Brass threads cleanly and resists corrosion, but it is softer than steel, so hand-tighten rather than driving these down with a power driver.

Is this kit good enough for a full desktop PC build?

For M3 fasteners, yes. 320 pieces gives you motherboard mounting plus spares. Note that many PC case screws use 6-32 threads, which this M3 kit does not include.

Does it come with a storage case?

Yes, the pieces ship organized in a compartment box so each size stays in its own slot. That organization is a large part of why the kit is easier to work from than a loose bag of mixed standoffs.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • HIGH QUALITY: Packaged included 320pcs M3 motherboard standoffs and screws. The M3 standoff kit is very good value, which has a wide selection of standoffs and connectors.The M3 laptop screws kit has nice brass finish with quality threads.The motherboard standoffs fit nicely, thread cleanly and the variety in this m3 standoff kit is more than enough for all of the components in your DIY build.
  • GOOD ASSORTMENT: The M3 standoff kit is a very nice assortment of brass standoffs and all neatly organized in a compartment box. All the threads in the M3 computer screws kit are correctly sized, clean, and burr free.The m3 standoff kit box holding all the motherboard screws pieces is a good bonus to keep all motherboard standoffs organized in their own compartment.
  • EASY TO USE: The M3 standoff kit is a great kit with a lot of options. The M3 standoff kit are simple to work with, yet usable. The M3 motherboard standoffs and screws kit is easy to adjust the selected step or rise. The motherboard standoffs are easy to install and durable to use, too.
  • MULTIPURPOSE: The motherboard standoffs kits are versatile. If you are a DIY computer builder, a little M3 standoff kit box of these motherboard standoffs and screws is essential. The motherboard screws is perfect fit for Raspberry Pi and associated components, PCBs, desktop computer motherboards, and other electronic devices.
  • CUSTOMER SERVICE: We are committed to provide superior motherboard standoffs and service for our customers. If you have any questions about the motherboard standoffs or need to help, please contact us. Moreover, we will be appreciate it if you can share your m3 standoff using experience with others or give us some suggestions for improving the standoff kit.

Full Specifications

SizeM3
BrandCsdtylh
ColorGold and Silver
ModelM3
MaterialBrass, Stainless Steel
Set Name320Pcs M3 Motherboard Standoffs&Screws&Nuts Kit
Size NameM3
Item ShapeHexagonal
Unit Count1 Count
Part Number00018
Thread SizeM 3
Finish TypesBrass
Fastener TypeHex
Item Diameter3 millimeters
Material TypeBrass, Stainless Steel
Number Of Items320
Number of Pieces320
Screw Head StyleHex
Compatible Groove Diameter3 millimeters
Full listing title320Pcs M3 Motherboard Standoffs&Screws&Nuts Kit, Hex Male-Female Brass Spacer Standoffs, Laptop Screws for DIY Computer Build, Electronic Projects, Raspberry Pi, Circuit Board etc.

Ready to buy?

320Pcs M3 Motherboard Standoffs&Screws&Nuts Kit, Hex Male-Female Brass Spacer Standoffs, Laptop Screws for DIY Computer Build, Electronic Projects, Raspberry Pi, Circuit Board etc. is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Tools & Maintenance

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →