Arducam M12 Lens Set for Raspberry Pi & Arduino
Bottom line: Per its Amazon listing, the Arducam M12 Lens Set for Raspberry Pi & Arduino: NOTE: The 4 lens holders included come with 18mm/20mm hole spacing and 7mm/13mm heights.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ NOTE: The 4 lens holders included come with 18mm/20mm hole spacing and 7mm/13mm heights
- ✓ Backed by Arducam's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Arducam M12 Lens Set for Raspberry Pi & Arduino, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Why we need it: In case you’re disappointed with the fixed official cameras and want precise control of what gets into the frame of your image – like how wide and how close it is - we selected, tested and labeled a bunch of lenses and shrinks it all into a complete toolbox on your palm
- What’s in it: This kit includes 10 M12 Lenses to cover almost any angles of view you’ll ever need, 10°/20°/40°/60°/80°/100°/120°/140°/160°/200° respectively on a 1/4” Pi Camera like OV5647 and IMX219. M12 lens holders, screws, specifications and even cleaning cloth are also in the box
- What else is needed: It makes a perfect combo with “Arducam B0031”, a more flexible and slightly larger camera module for Raspberry Pi that uses M12 lenses to frame up the best image. You can’t use this kit directly with the official Raspberry Pi Camera Module V2 because an M12 holder or 18/20mm hole spacing of the camera board is required
- NOTE: The 4 lens holders included come with 18mm/20mm hole spacing and 7mm/13mm heights. Typically lenses with a larger Field of View will require shorter holders, and that means you need to change the lens holder if the lens does not focus at all. Arducam CS Mount Cameras also work with this kit with holders replaced
Full Specifications
| Lens | Wide Angle |
|---|---|
| Brand | Arducam |
| Color | 10-lens complete Kit for Raspberry Pi Camera |
| Lens Type | Wide Angle |
| Focus Type | Manual Focus |
| Lens Mount | CS |
| Media Type | EnhancedContent |
| Model Name | fisheye lens |
| Unit Count | 10 Count |
| Zoom Ratio | 1:1 |
| Camera Lens | wide angle lens, fisheye lens, macro lens |
| Lens Design | Prime |
| Model Number | 3216551480 |
| Number of Items | 10 |
| Number of Packs | 1 |
| Real Angle Of View | 100 degrees |
| Image stabilization | Optical |
| Compatible Mountings | M12 Mount |
| Maximum Focal Length | 20 millimeters |
| Minimum Focal Length | 20 millimeters |
| Full listing title | Arducam M12 Lens Set for Raspberry Pi & Arduino - Telephoto, Macro, Wide Angle, Fisheye (10-200) with Holder & Cleaning Cloth |
Ready to buy?
Arducam M12 Lens Set for Raspberry Pi & Arduino - Telephoto, Macro, Wide Angle, Fisheye (10-200) with Holder & Cleaning Cloth is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Emulation Hardware
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc GPU for Stable Diffusion: Setup & Benchmarks
- Best Storage for a Retro PC Build in 2026
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Streaming in 2026
- Can a Ryzen AI Max+ 395 Mini-PC With 128GB Run Big LLMs? The r/LocalLLaMA Question
- Best CPU for Streaming and Gaming on a Single PC in 2026
- Build a Raspberry Pi 4 NVMe Jellyfin Homelab Box in 2026
- GLM-5.2's 37k-Token Reasoning Outputs and What They Mean for Local Rigs
- Heterogeneous GPU Weighting and Layer Splitting: Mixed-GPU LLM Inference on Consumer Hardware
- Best Raspberry Pi for Klipper in 2026: Pi 4 8GB vs Alternatives
- Steam Deck OLED vs ROG Xbox Ally: 2026 Comparison
- Best Gear for Online D&D and Virtual Tabletop Nights in 2026
- Best Motherboard for Ryzen 7 9800X3D in 2026
- What We Lost When LAN Parties Died: A 2026 Editorial
- CompactFlash as a Retro PC Boot Drive: The 2026 CF-to-IDE Build Guide
- Black Friday KVM Switch Deals: 5 Picks for Two-PC Desks
- AMD Ryzen 7 9800X3D Bundle: DDR5 + MSI B850 Wi-Fi 7 Guide
- Best Controllers for Retro Gaming and Emulation in 2026
- Using Claude to Drive Period-Correct Win98 Driver Installs on Voodoo and GeForce 4 Hardware
- Modern Retro Console Mods: 2026 Upgrade Guide
- When a Game Boy Clone Runs Too Fast: The Crystal-Swap Fix Behind a Viral Repair
- How to Install Windows 98 SE on a CompactFlash Boot Drive in 2026 (Retro PC Build Guide)
- Gemma 4 31B on a 12GB RTX 3060: Quantization, VRAM, and Real tok/s
- Steam Deck on 100+ Inch Screens: Big-Screen Setup Guide
- Asus ROG Xreal R1: 240Hz AR Glasses Hit Review
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090