Skip to main content
8Ft Power Cord for Canon Pixma TS9120 MX922 MG2522 G4210 MG7720 MG6822 MG6821 MG6820 MG5722 MG5721 MG5720 Pixma pro 100 Pro-100 MX472 492 495 MG2920 7520 2 Prong Power Cord Replacement AC Cable
Saireed

Saireed 8Ft Power Cord

Bottom line: The Saireed 8Ft Power Cord: 8 ft (2.5 m) length reaches outlets a stock printer cord can't; main trade-off: no good for devices with a 3-prong (C13) or cloverleaf (C5) power inlet.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar accessories

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 8 ft (2.5 m) length reaches outlets a stock printer cord can't
  • ✓ Standard IEC 320 C7 figure 8 plug fits many Canon Pixma and Maxify printers
  • ✓ Rated 125V 10A with 18AWG NISPT-2 wire
  • ✓ Non-polarized NEMA 1-15P plug fits either way into a 2-slot outlet
  • ✓ Also powers PS4, PS3 Slim, PS2, scanners, monitors and powered speakers

Cons

  • ✗ No good for devices with a 3-prong (C13) or cloverleaf (C5) power inlet
  • ✗ No ground pin, so it can't replace a grounded 3-prong cord
  • ✗ 125V NEMA plug is for North American outlets only
  • ✗ Pack holds one cord, so you need two orders for two devices

Manufacturer description

If your Canon Pixma printer's original cord is lost or frayed, the Saireed 8ft power cord replaces it. It fits the figure 8 power socket used on many Pixma and Maxify printers. One end is a standard NEMA 1-15P two-prong plug for North American wall outlets. The other end is an IEC 320 C7 figure 8 connector that seats in your printer's power socket. The cable is rated 125V 10A and uses NISPT-2 18AWG wire (approx. 0.824 mm2). The plug is non-polarized, so it goes into the outlet either way round. At 2.5 meters (8 feet) long, it lets you put the printer on a shelf or across the room from the…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Saireed 8Ft Power Cord using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Saireed's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this power cord fit my Canon Pixma MG3620 or MG2522?

Yes. Saireed lists both the MG3620 and MG2522 as compatible. It also lists many more Pixma models, including the TS9120, MX922, MG5720 series, MG7720 and G4210. They all use the same IEC 320 C7 figure 8 power socket.

How long is the cord?

The cord is 2.5 meters (about 8 feet) from the wall plug to the figure 8 connector. That is enough to place a printer on a desk or shelf away from the nearest outlet.

Can I use this cord with a PS4 or PS3?

Yes. Saireed lists the Sony PS4, PS3 Slim Edition and PS2 as compatible. These consoles use the same two-prong figure 8 (C7) power connector as the supported Canon printers.

Will it work on a printer with a three-prong power socket?

No. This cord has a two-slot IEC 320 C7 figure 8 connector and no ground pin. It only fits devices with a matching figure 8 socket, not three-prong C13 or cloverleaf C5 inlets.

What are the electrical ratings, and can I use it outside North America?

It is rated 125V 10A, with a NEMA 1-15P two-prong plug and 18AWG (approx. 0.824 mm2) NISPT-2 wire. The plug fits standard North American outlets. In other regions, use a cord made for your local outlet type and voltage.

Key Features

  • Replacement 2 prong ac power cord for most models of scanner, printer, LED TV monitor, projector, powered speakers, Sony PS4, PS3 Slim Edition, PS2 and more that have a removable power cord and use the 2 prong figure 8 shotgun power connector
  • Figure 8 Power Cords ,125V 10A NEMA 1-15P to IEC320 C7,Non-Polarized,NISPT-2 18AWG(approx.0.824mm2) extension cable connects from your equipment socket to a standard 2 pronged AC outlet receptacle
  • Printer power cord cable compatible with Canon Pixma Mark II Printer: iP1000 iP1200 iP1500 iP1600 iP1700 iP1800 iP2000 iP2200 iP2500 iP2600 iP3000 iP3300 iP4000 iP4200 iP4500 iP5000 iP5200 iP5300 iP6000D iP6210D iP6220D iP6600D iP8500 iP90 iP90v iX4000 iX5000;Canon Pixma MP:MP110 MP150 MP160 MP170 MP180 MP210 MP240 MP390 MP450 MP490 MP500 MP560 MP600R MP610 MP640 MP700 MP780 MP800 MP810 MP830 MP950 MP960 MP970 MP990;
  • 8Ft ac cable for Canon PIXMA TS9120 MX922 MG2522 G4210 MG7120 MG7720 MG6822 MG6821 MG6820 MG5722 MG5721 MG5720 MG3600 MG3620 MG2920 MG6620 MG6320 MG7520 MG4220 MG5422 MG5420 MG5520 MG5620 MG2924 MG2420 MG3022 MG3220 MG3222 MG3520 MG5420 MG4220, MF7470, MF7480, MF7460 PIXMA Pro MX472 492 495 452 340 870 922 Pro9000 Pro9500;Maxify Printer MB2720 MG2920 7520 MB2120 MB5120 MB5420 iB4120 MB2320 MB2020 MB5320 iB4020 MB5020 Printers and more.
  • Package content: 1 x 2.5 meter ( 8 Feet ) length Figure 8 Extension AC 2 prong printer power cord for Canon Pixma.

Full Specifications

BrandSaireed
ColorBlack
Gauge18
Voltage125 volts
Wattage300 watts
Amperage10 A
Plug TypeType A
Unit Count1 Count
Item Length98.43 inches
Plug FormatType A
Model NumberCAN1012
CompatibilityPS4, PS3
Input Current10 A
Built-In MediaAC Adapter
Mfr Part NumberCAN1012
Package content1 x 2.5 meter ( 8 Feet ) length Figure 8 Extension AC 2 prong printer power cord for Canon Pixma.
Connector GenderMale-to-Female
Number of Outlets1
Number Of Conductors2
Warranty Description1 year
Full listing title8Ft Power Cord for Canon Pixma TS9120 MX922 MG2522 G4210 MG7720 MG6822 MG6821 MG6820 MG5722 MG5721 MG5720 Pixma pro 100 Pro-100 MX472 492 495 MG2920 7520 2 Prong Power Cord Replacement AC Cable

Ready to buy?

8Ft Power Cord for Canon Pixma TS9120 MX922 MG2522 G4210 MG7720 MG6822 MG6821 MG6820 MG5722 MG5721 MG5720 Pixma pro 100 Pro-100 MX472 492 495 MG2920 7520 2 Prong Power Cord Replacement AC Cable is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Accessories

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
8Ft Power Cord for Canon Pixma TS9120 MX922 MG2522 G4210 MG7720 MG6822 MG6821 MG6820 MG5722 MG5721 MG5720 Pixma pro 100 Pro-100 MX472 492 495 MG2920 7520 2 Prong Power Cord Replacement AC Cable
View on Amazon →