Skip to main content
GDSTIME 40mm x 10mm Blower Fan 12V 2Pin 4010 DC Brushless Cooling 2-Pack
GDSTIME

GDSTIME 40mm x 10mm Blower Fan 12V 2Pin 4010 DC Brushless Cooling 2-Pack

Bottom line: The GDSTIME 40mm x 10mm Blower Fan 12V 2Pin 4010 DC Brushless Cooling ($14.99 on Amazon as of 2026-11-21 05:15 UTC, orderable but not in stock): 0.371 in H2O static pressure pushes air through tight ducts; main trade-off: 30.5 dBA at 7,000 RPM is audible in a quiet room.

$14.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ 0.371 in H2O static pressure pushes air through tight ducts
  • ✓ Hydraulic bearing rated for 40,000 hours of continuous run
  • ✓ 1.2 m (3.94 ft) lead reaches boards without an extension
  • ✓ PBT housing and 7,000 RPM rating survive hot-end proximity

Cons

  • ✗ 30.5 dBA at 7,000 RPM is audible in a quiet room
  • ✗ 2.53 CFM is low for anything beyond part cooling
  • ✗ Bare 2-pin XH2.54 plug means no tach or PWM speed control
  • ✗ Polarity is manual: red positive, black negative, wired by hand

Manufacturer description

DescriptionThis is a 3D printer cooling blowing fan, which is made of PBT plastic material. It is excellent for cooling heatsinks on hot ends, prints, or other cooling needs, bearing is high precision, long life and low noise. Containing long life hydraulic bearings, the fans can be run continuously for 40,000 hours and be mounted in any direction. Whether you want to replace a broken fan, improve overhang and bridging distances, or improve the airflow towards your parts, this 4010 blower fan upgrade is something that can get you there.Porduct DimensionTotal Dimensions: 1.57 x 1.57 x 0.39…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for GDSTIME 40mm x 10mm Blower Fan 12V 2Pin 4010 DC Brushless Cooling…, so this read rests on the manufacturer's listed specs and the current price in the retro cpu coolers & fans category (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "0.371 in H2O static pressure pushes air through tight ducts"; the main trade-off is "30.5 dBA at 7,000 RPM is audible in a quiet room". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 3D Printer Fan Upgrade / Replacement: Mini 40 mm Blower Cooling fan for 3D printer hot ends, extruder, etc.; Whether you want to replace a broken fan, improve overhang and bridging distances, or improve the airflow towards your parts, this 4010 blower fan upgrade is something that can get you there
  • Well Build: 40 mm small turbo blower fan is constructed of PBT material; Built-in high end pure copper coil Hydraulic Bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern; Lifespan: 40,000 hours
  • 2Pin Connector with Long Wire: 1.2 m/3.94 ft cable length 2-wire terminated with XH2.54-2Pin connector for power supply; make sure positive (+) and negative (-) poles are in right place and match up to your 3d printer motherboard (Red wire : positve, Black: negative)
  • 4010 Blower Fan 12V Specs: Size: 40 x 40 x 10 mm (1.57 x 1.57 x 0.39 inches) | Hole to Hole Distance: 35 mm (1.38 inches) | Rated Voltage: 12V | Rated Current: 0.1 Amp | Power: 1 W | Speed: 7000 RPM | Noise: 30.5 dBA | Airflow: 2.53 CFM | Static Pressure: 0.371 In H2O
  • Easy to Use: Includes 2Pcs 40x40x10mm 12V DC Blower Fans and Mounting Screw Sets; Highly speed with low power consumption for durable use; Startup Voltage: 3V; Opearating Voltage: 7 to 13.5V (If over 13.5v, it also can wirk, but will affect the fan life)

Full Specifications

BrandGDSTIME
Model8541598065
TurboYes
Voltage12 volts
Wattage1 watts
MaterialPlastic
Dimensions40 x 40 x 10 mm
Unit Count2 Count
Noise Level30.5 db
Part Number2*GDT4010S12V2P2.54-BF
Material TypePlastic
Cooling MethodAir
Number of Items2
Number of Packs1
Air Flow Capacity2.53 cfm
Compatible Devices3D Printer
Included Components2 Pieces 40x40x10mm blower fan; Screws and nuts
Power Connector Type2-Pin
Warranty DescriptionOne-year Warranty (Free Replacement)
Maximum Rotational Speed7000 rpm

Benchmark data for other processors

Ready to buy?

GDSTIME 40mm x 10mm Blower Fan 12V 2Pin 4010 DC Brushless Cooling 2-Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Current Price on Amazon

*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Retro CPU Coolers & Fans

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →