ALITOVE 16.4ft 5050 SMD Black PCB 12V White LED Strip Light Flexible Rope Lights 5M 300 LEDs LED Tape Light Waterproof IP65 DC for Home Garden Commercial Area Lighting(Without Power Supply)
Bottom line: The ALITOVE 16.4ft 5050 SMD Black PCB 12V White LED Strip Light Flexible: 300 5050 SMD LEDs at 60/m for even, dot-free white light; main trade-off: power supply not included; budget for a 12V 5A unit.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 300 5050 SMD LEDs at 60/m for even, dot-free white light
- ✓ IP65 silicone coating suits decks, patios and boats
- ✓ Cuttable every 3 LEDs to fit custom lengths
- ✓ Dual inputs: bare 2-pin leads plus a 5.5x2.1mm DC jack
- ✓ VHB foam tape holds better than standard thin adhesive
Cons
- ✗ Power supply not included; budget for a 12V 5A unit
- ✗ Cracks if bent to a right or acute angle
- ✗ Sustained voltage above 12V in vehicles can damage the board
- ✗ Single white color; no controller or remote in the box
Manufacturer description
The ALITOVE 16.4ft LED strip light puts 300 daylight-white 5050 SMD LEDs on a 5m black PCB. At 60 LEDs per meter, the light along the run looks even, with no gaps or hot spots between chips. It runs on low-voltage 12V DC, and the double-layer copper FPCB lets you bend it gently around curves and arcs. Installation is flexible. One end has bare 2-pin leads that screw into the terminals of a 12V power supply. The other end has a 5.5x2.1mm female DC jack, so it works with any 12V adapter that has a matching male plug. You can cut the strip at the marked points every 3 LEDs to fit shelves…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for ALITOVE 16.4ft 5050 SMD Black PCB 12V White LED Strip Light Flexible…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "300 5050 SMD LEDs at 60/m for even, dot-free white light"; the main trade-off is "Power supply not included; budget for a 12V 5A unit". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What power supply do I need for the ALITOVE 16.4ft LED strip?
It needs a 12V DC supply. ALITOVE recommends a 12V 5A 60W power supply for the full 5m (300 LED) strip. An underpowered supply can make the DC connector run hot.
Can I cut this LED strip to a shorter length?
Yes. Cut only along the marked cutting lines, which come every 3 LEDs. Cutting anywhere else will disable that section.
Is the ALITOVE strip waterproof enough for outdoor use?
It has a clear silicone coating rated IP65, which suits outdoor spots like a backyard, deck or boat. IP65 means it resists splashes and water jets, but it is not designed to be submerged.
How do I connect it if my adapter has a barrel plug?
One end of the strip has a 5.5x2.1mm female DC connector. Any 12V supply with a 5.5x2.1mm male plug connects directly. The other end has bare 2-pin wires for screw terminals.
Can I use this LED strip in a car or RV?
Yes, but only with a stable 12V source. ALITOVE warns that running it above 12V for long periods will damage the circuit board, so use a regulated supply in vehicles.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Super Quality LED Strip】 300 pcs high-brightness 5050 daylight white LEDs are evenly embedded on the 5m(16.4ft) double-layer pure copper FPCB Board and give out beautiful red light. High-density 60 LEDs/M design makes luminescence more even and natural. Low voltage 12V DC input, safe to use, touchable to children.
- 【VHB Foam Back Tape】 Based on buyers’ feedback on adhesive issue, we upgraded the tape to VHB heavy duty foam mounting tape. It is much more sticky and durable than blue or white tapes which is widely used by other brands. Never fall off. ( Heating the tape with heat gun or hair dryer will make it more sticky.)
- 【Flexible Design & Cut Easily】 Using flexible copper circuit board, you can gently bend it to an arc. Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along along the cutting marks to fit for your project, great for DIY.
- 【Two different power input ends】One end has 2pin wire, you can screw it to the positive and negative terminals of 12V power supply. The other end has 5.5x2.1mm female DC connector. If your 12V power supply has 5.5x2.1mm male DC connector, just plug and work. The power supply is not included.
- 【Indoor and Outdoor Use】The LED strip is coated with clear silicone, up to IP65 waterproof rate. It can be used to beautify both indoor and outdoor lighting scenes, such as backyard, deck, boat, living room, bedroom, kitchen, ceiling, stairs etc. 24 months warranty. We always stand behind our products.
- Important: Please note that if used with vehicles such as cars, RVs, trucks, etc., please ensure that the power supply provides a stable voltage; if used for a long time at more than 12V, the circuit board will be damaged, resulting in abnormal conditions.
Full Specifications
| Brand | ALITOVE |
|---|---|
| Color | Cool White |
| Style | Modern |
| Theme | Decoration , Lighting , Party , Holiday |
| Voltage | 12 volts |
| Wattage | 60 |
| Occasion | Party , Holiday , Show |
| Unit Count | 16.4 Feet |
| Form Factor | Strip Lights |
| Item Length | 5 meters |
| Light Color | Daylight White |
| Model Number | ALT-5CW300WPBK |
| Power Source | DC 12V |
| Material Type | Plastic |
| Product Style | Modern |
| Control Method | App |
| Controller Type | No |
| Item Dimensions | 196 x 1 x 7 inches |
| Number of Items | 1 |
| Special Feature | Dimmable |
Ready to buy?
ALITOVE 16.4ft 5050 SMD Black PCB 12V White LED Strip Light Flexible Rope Lights 5M 300 LEDs LED Tape Light Waterproof IP65 DC for Home Garden Commercial Area Lighting(Without Power Supply) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- AOC U27G4XM 4K 160Hz Review: Speed, Flexibility, Value
- Best Budget Upgrades to Revive an Old Gaming PC in 2026
- DIY NVIDIA 3D Vision Emitter: Building One with an RP2040
- Intel LLM-Scaler vLLM 1.4 on Arc Pro B70: What the Latest Driver Stack Means for Local Inference
- Best GPU for Gemma 3 27B in 2026: Where 12 GB Stops Being Enough
- Stable Diffusion on Intel Arc vs RTX 3060 12GB: Which Budget GPU Renders Faster?
- Best Controller for PC Retro Gaming (2026)
- Raspberry Pi 5 16GB for Local LLMs: What Models Actually Fit?
- Glide on Modern PCs: dgVoodoo2 + nGlide for 3dfx-Era Games (2026)
- Best Gaming Headsets for PS5 and PC in 2026
- Gemma 4 31B on a 16GB GPU: RTX 5060 Ti vs RX 9060 XT vs Arc A770 Quant Table (2026)
- Qwen Plays DCSS: What Roguelike Runs Tell Us About Long-Context Agent Performance
- Sound Blaster in 2026: Using the Creative Sound BlasterX G6 on a Retro and Modern PC
- Authentic Retro PC Audio in 2026: Sound BlasterX G6 vs Vintage AWE64 and Audigy
- Local LLM as a Quake 3 / UT99 Demo Coach: Ollama on Ryzen 7 5800X + RTX 3060 (2026)
- Anthropic's Fable 5 Ban and Jailbreak: What It Means for Local-LLM Resilience
- Microsoft + NVIDIA's 'Agent PC': What Local Hardware Does an On-Device AI Agent Actually Need in 2026?
- How to run Llama 3.1 8B on Apple M4 Max
- 4K Gaming PC Build 2026: Cost, Parts, FPS
- Ryzen 5 5600G vs Ryzen 7 5700X: Best Budget Build CPU 2026
- Raspberry Pi 5 IOMMU Driver Lands for the Mainline Linux Kernel
- Forza Horizon 6 on the Steam Deck: Settings, Frame Pacing, and the SSD Question
- Open-Source NVIDIA NVK Vulkan Driver Now Supports DLSS
- Best IDE & SATA-to-USB Adapters for Retro PC Builds in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090