Tabiger Solder Sucker Desoldering Wick Kit
Bottom line: The Tabiger Solder Sucker Desoldering Wick Kit: Pump plus 2.5mm braid covers both bulk suction and fine pin cleanup; main trade-off: manual spring pump, not a powered desoldering station with continuous vacuum.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Pump plus 2.5mm braid covers both bulk suction and fine pin cleanup
- ✓ Aluminum bronze frame and aluminum body resist corrosion and dump heat between pulls
- ✓ 1.5m of rosin-cored copper braid is enough for a full recap job
Cons
- ✗ Manual spring pump, not a powered desoldering station with continuous vacuum
- ✗ 2.5mm braid is wide for single 0.5mm SMD pins
- ✗ No replacement plunger seals or tips listed in the kit
- ✗ Rosin flux residue on the braid needs cleanup after use
Manufacturer description
The Tabiger Solder Sucker Desoldering Wick Kit pairs two removal methods in one inexpensive package, which is why it shows up on so many retro repair benches. The vacuum desoldering pump uses an aluminum body with an aluminum bronze frame and a high-pressure plunger to pull molten solder off a through-hole joint in a single stroke, handling the bulk work of lifting relays, sockets, and larger components from a printed circuit board. The included 2.5mm-wide, 1.5-meter alloy braid picks up where the pump cannot reach: precision-woven copper with rosin flux, it wicks residual solder off fine…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Tabiger Solder Sucker Desoldering Wick Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "Pump plus 2.5mm braid covers both bulk suction and fine pin cleanup"; the main trade-off is "Manual spring pump, not a powered desoldering station with continuous vacuum". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Is this good for recapping a retro motherboard or console?
Yes. The vacuum pump handles through-hole capacitor legs and the 1.5m of 2.5mm braid cleans residual solder off the pads, which is the standard two-step recap workflow.
Do I still need a soldering iron with this kit?
Yes. Both tools only remove solder that you have already reheated. The kit includes the desoldering pump and the solder wick, not a heat source.
How wide is the solder wick and how much do you get?
The braid is 2.5mm wide and 1.5 meters long. That width suits through-hole pads and multi-pin clusters better than isolated fine-pitch SMD legs.
What is the pump body made of?
The desoldering pump uses an aluminum body with an aluminum bronze frame. Tabiger specifies it for impact and corrosion resistance plus heat dispersion during repeated pulls.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Powerful Suction Solder Sucker】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
- 【Powerful Suction Solder Sucker】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
- 【Alloy Braided Solder Wick】Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
- 【Durable Desoldering Iron Kit】The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
- 【A Must-have Solder Removal Kit】The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
Full Specifications
| Brand | Tabiger |
|---|---|
| Style | Set 1 |
| Style Name | Set 1 |
| Model Number | 0301011 |
| Manufacturer Part Number | 0301011 |
| Full listing title | Solder Sucker Desoldering Wick Kit, Solder Wick & Desoldering Pump, Sucker & Solder Wick(2.5mm Width, 1.5m Length) Vacuum Pump Solder Removal Tool |
Ready to buy?
Solder Sucker Desoldering Wick Kit, Solder Wick & Desoldering Pump, Sucker & Solder Wick(2.5mm Width, 1.5m Length) Vacuum Pump Solder Removal Tool is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Is the RTX 3060 12GB Still Worth It for 1440p Gaming in 2026?
- EU GPU Price Tracking: Why RTX 5090 Won't Get Cheaper
- GPU Deals for Local LLMs 2026: 12GB vs 16GB Cards
- Best GPU for Llama 3.1 405B (2026)
- Sound Blaster G6 in a Period-Correct WinXP Build: Modern USB DAC Meets Vintage Hardware
- RX 9070 XT vs RTX 5080 for a 9800X3D Build (2026)
- HiDream-O1 1.5 Lands #3 in Text-to-Image: Can You Run It Locally on a 12GB GPU?
- AI-Driven Win98 LAN Party Server Config Generation
- NVMe vs SATA for Game Load Times: WD Blue SN550 vs Crucial BX500 in 2026
- Can You Run Local TTS on an RTX 3060 12GB in 2026?
- Best DualSense and PC-Compatible Controller (2026)
- 2025 Local LLM Leaderboard: Best AMD GPUs Ranked
- CompactFlash Boot Drive for Windows 98 Retro PC: The 2026 Transcend CF133 Recipe
- Best Game Controller in 2026: 5 Picks for PC, Console and Retro
- Best Gaming PC Build Components for 2026
- Custom Steam Controller Startup: Reviving OG Big Picture Mode
- Microsoft and Mistral Sign Multi-Billion Europe AI Infra Deal
- Asus ROG Xreal R1 AR glasses pre-orders start today at $849 — 240 Hz virtual gaming at 171 inches on PC…
- Asus ROG Xreal R1: 240Hz AR Glasses Hit Review
- Budget 4K QD-Mini LED Gaming Monitors Hit New Lows in 2026
- Best Mid-Range CPU for Streaming and Gaming in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- Intel Arc B60 Stable Diffusion: Setup & Benchmarks 2025
- Voodoo5 5500 PCI in a Modern Board: Install, Glide & Win98 Setup
- CUDA 13.3 and the RTX 3060: What Changes for Local LLM Inference
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090