Skip to main content
InnoGear Microphone Stand Mic Boom Arm for Blue Yeti HyperX QuadCast S SoloCast Snowball Fifine K669B and other Mic, with Shock Mount Windscreen Pop Filter Mic Clip Holder Cable Ties, Medium
InnoGear

InnoGear Microphone Stand Mic Boom Arm

Bottom line: The InnoGear Microphone Stand Mic Boom Arm ($18.99 on Amazon as of 2026-11-20 13:45 UTC): Ships complete: arm, shock mount, dual pop filter, 3/8-to-5/8 adapter, mic clip, 5 cable ties; main trade-off: shock mount does not fit the Blue Yeti, despite the arm supporting it.

$18.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Ships complete: arm, shock mount, dual pop filter, 3/8-to-5/8 adapter, mic clip, 5 cable ties
  • ✓ Dual-screen pop filter disperses plosives between layers, unlike single-mesh filters
  • ✓ Extra-strong spring resists sag, drift, and accidental mic drops mid-session
  • ✓ Zinc alloy clamp with sponge padding grips desks up to 2 inches thick

Cons

  • ✗ Shock mount does not fit the Blue Yeti, despite the arm supporting it
  • ✗ 52mm shock mount hole is wider than standard, so slimmer mics may need the clip instead
  • ✗ Medium size only in this listing; heavier or longer-reach setups need a different variant
  • ✗ Desk clamp caps out at 2-inch thickness, ruling out thicker butcher-block tops

Manufacturer description

Turn a bare-bones desktop mic setup into a broadcast-ready one with the InnoGear Microphone Stand boom arm, a five-piece bundle built around industry-standard 3/8-inch to 5/8-inch threading. The included metal screw adapter lets the arm carry a Blue Yeti, Blue Snowball, Blue Snowball iCE, HyperX QuadCast, QuadCast 2 S, SoloCast 2, Razer Seiren V3 Mini, Fifine AM8, and most other standard-sized mics without extra hardware. An extra-strong internal spring holds position under load, so your microphone stays where you place it instead of drifting mid-stream or dropping and generating handling…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for InnoGear Microphone Stand Mic Boom Arm, so this read rests on the manufacturer's listed specs and the current price in the PC & gaming hardware category (how we evaluate). Compare with similarly-priced alternatives in the PC & gaming hardware category before committing. On the listing's own facts, the case for it is "Ships complete: arm, shock mount, dual pop filter, 3/8-to-5/8 adapter, mic clip, 5 cable ties"; the main trade-off is "Shock mount does not fit the Blue Yeti, despite the arm supporting it". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does this boom arm work with the Blue Yeti?

Yes, the arm itself supports the Blue Yeti using the included 3/8-inch to 5/8-inch metal screw adapter. Note that the bundled shock mount is not compatible with the Blue Yeti, so mount the Yeti directly to the arm.

What comes in the box?

The kit includes the microphone boom arm, a zinc alloy table mounting clamp, a 3/8-inch to 5/8-inch metal screw adapter, a double-screen pop filter, a shock mount with a 52mm hole diameter, a mic clip holder, and five cable ties.

Will the clamp fit my desk?

The adjustable positioning screw clamps to desktops up to 2 inches thick. Sponge protective layers sit between the zinc alloy clamp and your desk surface. Measure your desktop edge before ordering if you have a thick or beveled top.

Which microphones is it compatible with?

InnoGear lists the HyperX SoloCast 2, QuadCast, QuadCast 2, QuadCast 2 S, Blue Yeti, Blue Snowball, Snowball iCE, Razer Seiren V3 Mini, and Fifine AM8, plus most mics using standard 3/8-inch or 5/8-inch threading.

Will the microphone sag or droop over time?

The boom arm uses an extra-strong internal spring specifically to prevent accidental dropping, shaking, and the handling noise that comes with it.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Universal Compatibility& Comprehensive Protection: InnoGear mic arm is engineered to seamlessly fit industry-standard 3/8'' to 5/8'' screw adapters, which is compatible with HyperX SoloCast 2, HyperX QuadCast 2 S, Razer Seiren V3 Mini, HyperX QuadCast 2, Blue Yeti, Blue Snowball, Blue Snowball iCE, HyperX QuadCast, Fifine AM8 and a wide range of standard-sized microphones. The shock mount (not fit for Blue Yeti), crafted from premium materials, features a 52mm hole diameter, slightly larger than standard mounts, and provides enhanced stability and effortless installation.
  • Heavy-duty Structure Mic Stand: The extra strong spring of the boom arm prevents the microphone from accidental dropping, noise generation and shaking. It has a table mounting clamp and protective layers of sponge. An adjustable positioning screw can easily clip to any desktop with a thickness of 2".
  • Double Screen Pop Filters: The first screen blocks air blasts as any pop filter normally would. The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained.
  • All-in-One Combo: Package includes all the items you need for studio recording and live sound, a microphone stand, a zinc alloy table mounting clamp, a 3/8" to 5/8" metal screw adapter, a pop filter, a shock mount and five cable ties, easy to assemble and carry.
  • Especially DesMic stand mic stand boom arm mic stand desktop Microphone Stand adjustable microphone stand Windscreen pop filter Shock mount shock mount boom arm standign: The cable ties which adopt the self-locking fastener design, strong durable powerful lock, easy handling and prevent snagging in tight.

Full Specifications

BrandInnoGear
ColorBlack
StyleMic Arm Set
MaterialAlloy Steel
Set NameMicrophone Mounting Set
Base TypeClamp
Model NameMU059
Unit Count1 Count
Finish TypePowder Coated
Model NumberMU059
Material TypeAlloy Steel
Product StyleMic Arm Set
Item Type Namemicrophone-mounts
Maximum Height70 centimeters
Body Material TypeSteel
Included ComponentsMicrophone Stand, Zinc Alloy Table Mounting Clamp, 3/8" to 5/8" Metal Screw Adapter, Pop Filter, Shock Mount, 5 Cable Ties
Manufacturer Part NumberMU059
Microphone Stand Thread Size3/8 inch, 5/8 Inch
Maximum Weight Recommendation1.5 kg
Full listing titleInnoGear Microphone Stand Mic Boom Arm for Blue Yeti HyperX QuadCast S SoloCast Snowball Fifine K669B and other Mic, with Shock Mount Windscreen Pop Filter Mic Clip Holder Cable Ties, Medium

Ready to buy?

InnoGear Microphone Stand Mic Boom Arm for Blue Yeti HyperX QuadCast S SoloCast Snowball Fifine K669B and other Mic, with Shock Mount Windscreen Pop Filter Mic Clip Holder Cable Ties, Medium is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $18.99

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →