Skip to main content
SainSmart Genmitsu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO
SainSmart

SainSmart Genmitsu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO

Bottom line: The SainSmart Genmitsu CNC Router Machine Controller Board: Drop-in replacement board for Genmitsu 1810-PRO, 3018 and 3018-PRO routers; main trade-off: stepper current caps at 2A (1.5A recommended) for 42/57 motors.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For projectors, gaming displays and video upscalers, synthesises manufacturer specs against measured reviews (ProjectorCentral, RTINGS), treating non-ANSI "lumen" figures as marketing claims rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference. How we check display specs →

Pros & Cons

Pros

  • ✓ Drop-in replacement board for Genmitsu 1810-PRO, 3018 and 3018-PRO routers
  • ✓ Runs open-source GRBL with UniversalGcodeSender, no proprietary software
  • ✓ DRV8825 drivers handle XYZ three-axis plus spindle and laser control
  • ✓ Supports both 3-pin and 2-pin laser modules via dedicated interface

Cons

  • ✗ Stepper current caps at 2A (1.5A recommended) for 42/57 motors
  • ✗ Laser drive chip 2 limited to 2A max at 0-12V adjustable
  • ✗ Needs a 24V (12-24V) supply, power adapter not included
  • ✗ 150W spindle ceiling rules out heavy metal machining

Manufacturer description

Parameters:Support Laser engraving.Support spindle PWM speed control.Support XYZ triaxial control, spindle, laser module.Connection for X-Y-Z end switches, built-in fan.Connection for optional offline-controller.Spindle drive chip 1: MOSFET (recommended input voltage within 12-24V, current 10A). It can be connected to a high-power spindle motor or the laser.Spindle drive chip 2: MOSFET (current maximum 2A !!). Can only be connected within the 2A the laser module, the voltage 0-12V can be adjustable.User Manual:https://go.aws/37nvo3EWHAT'S INCLUDED?1 x Controller Board1 x USB Cable

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for SainSmart Genmitsu CNC Router Machine Controller Board, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the displays & upscalers category before committing. On the listing's own facts, the case for it is "Drop-in replacement board for Genmitsu 1810-PRO, 3018 and 3018-PRO routers"; the main trade-off is "Stepper current caps at 2A (1.5A recommended) for 42/57 motors". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module.
  • Software: GRBL controller, UniversalGcodeSender.
  • Stepper motor drive: DRV8825; Spindle power: 150W; Input voltage: 24V (12-24V).
  • Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-").
  • Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57).

Full Specifications

BrandSainSmart
Colorblack
Model816550022382
MaterialAcrylonitrile Butadiene Styrene (ABS)
SoftwareGRBL controller, UniversalGcodeSender.
Part Number816550022382
Material TypeAcrylonitrile Butadiene Styrene (ABS)
Number of Items1
Stepper motor driveDRV8825; Spindle power: 150W; Input voltage: 24V (12-24V).
Support stepper motor12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57).
Item Dimensions L x W x H3.54"L x 3.35"W x 0.91"H

Ready to buy?

SainSmart Genmitsu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →