Saireed 2 Prong Power Cord
Bottom line: The Saireed 2 Prong Power Cord: 8 ft (2.5 m) length adds real distance between printer and wall outlet; main trade-off: non-polarized plug can seat either way, no hot/neutral orientation.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 8 ft (2.5 m) length adds real distance between printer and wall outlet
- ✓ Cross-compatible with Pixma MX922, MX532, MG2520, MG5320 and 20+ other models
- ✓ 18AWG NISPT-2 conductor rated 125V 10A, above the 7A cord spec
- ✓ Standard NEMA 1-15P to IEC C7 figure-8 fit, no printer-specific keying
Cons
- ✗ Non-polarized plug can seat either way, no hot/neutral orientation
- ✗ Only fits figure-8 C7 inlets, not 3-prong C5 or C13 printers
- ✗ Single cord per package, so multi-printer setups need multiple orders
- ✗ No listed cord jacket color, gauge tolerance, or warranty terms in the spec
SpecPicks Verdict
SpecPicks scored Saireed 2 Prong Power Cord using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Saireed's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Replacement Fingure 8 AC 2 prong IEC C7 125V 10A / 7A power cord cable for Canon Pixma printer
- Replace your overused, old, broken, damaged, or misplaced power cable or add extra distance / extension between devices for convenience
- Figure 8 Power Cords ,125V 10A NEMA 1-15P to IEC320 C7,Non-Polarized,NISPT-2 18AWG(approx.0.824mm2) extension cable connects from your equipment socket to a standard 2 pronged AC outlet receptacle.
- 8 Foot ac cable power cord for Canon Pixma MX922 MX532 MX492 MX512 MX392 MX372 MX472 MX490 MX479 MX350 MX340 MX490 MG2520 MG2525 MG5320 MG2120 MG2220 MG3120 MG3122 All-in-one Printer
- Package content: 1 x 2.5 meter ( 8 Foot ) length Figure 8 Extension AC Power Cord for Canon Pixma printer
Full Specifications
| Brand | Saireed |
|---|---|
| Color | Black |
| Gauge | 18 |
| Voltage | 125 volts |
| Wattage | 1000 watts |
| Amperage | 10 A |
| Plug Type | Type A |
| Unit Count | 1 Count |
| Item Length | 98.43 inches |
| Plug Format | Type A |
| Input Current | 10 A |
| Package content | 1 x 2.5 meter ( 8 Foot ) length Figure 8 Extension AC Power Cord for Canon Pixma printer |
| Connector Gender | Male-to-Female |
| Number of Outlets | 1 |
| Number Of Conductors | 2 |
| Power Cord Prong Count | 2 |
| Full listing title | 2 Prong Power Cord for Canon Pixma MX922 MX532 MX492 MX512 MX392 MG2520 MG2525 MG5320 MG2120 MG2220 MG3120 MG3122 All-in-one Printer 8ft IEC C7 Replacement AC Extension Cable |
Ready to buy?
2 Prong Power Cord for Canon Pixma MX922 MX532 MX492 MX512 MX392 MG2520 MG2525 MG5320 MG2120 MG2220 MG3120 MG3122 All-in-one Printer 8ft IEC C7 Replacement AC Extension Cable is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Gaming SSD in 2026: 5 Picks for PS5, Steam Deck, and Custom Builds
- CompactFlash + IDE Storage for a Period-Correct Windows 98 Build
- RTX 3080 vs RTX 5080 — is it time to upgrade?
- Hobbyist Turns a Raspberry Pi and ADS-B Into a Viral Real-Time Airport Tracker
- How to run DeepSeek-R1 32B on AMD Radeon RX 7900 XTX
- Core i7-9700K vs Ryzen 7 5800X for 1440p Gaming in 2026
- Best GPU for Ryzen 7 9800X3D in 2026: Pairing Guide
- Can a Raspberry Pi 4 Run the Oomwoo Open-Source Robot Vacuum Brain?
- Best SSD for a Local LLM Model Library in 2026: Capacity vs Load Speed
- Best Gaming Headsets and Audio Gear for Console Players in 2026
- Best Streaming Setup for Sim Racing in 2026: Cam, Mic, Light
- Codex Now Drives Windows PCs: The Local-Agent Rig You Can Build Instead
- Build a Raspberry Pi 4 NAS With an SSD in 2026
- Home Assistant on a Raspberry Pi 4 8GB in 2026: SSD Boot, Power Draw, Performance
- Local Whisper for Stream VODs: What Mic and GPU You Actually Need
- Best USB Microphone for Game Streaming on Twitch (2026)
- Coral TPU for LLM Inference: What the Specs Really Say
- Build a Silent Home NAS on a Raspberry Pi 4 8GB With a SATA SSD (2026)
- FIDECO vs Unitek: Best IDE-to-USB Adapter for Retro Drive Imaging
- Revive an Old Payphone with a Raspberry Pi Zero 2W
- Intel IPEX-LLM vs Ollama on AMD: AI Rig Guide 2025
- Intel llm-scaler-vllm 1.4: What Arc Pro B70 Support Means for Sub-$1500 Local Inference
- Best Game Controller for PC in 2026: 5 Picks From DualSense to Arcade Stick
- Best Compact DIY NAS Setup in 2026: A Buyer's Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090