Dual Monitor Stand Free Standing Desk Mount Monitor Arm Fits Two Screens up to 32 inch 22 lbs Fully Adjustable Arms with Max VESA 100x100mm (ML7802)
Bottom line: The Dual Monitor Stand Free Standing Desk Mount Monitor Arm Fits Two ($33.24 on Amazon as of 2026-10-07): Holds two 13-32 inch monitors at up to 22 lbs each; main trade-off: VESA support tops out at 100x100mm; larger patterns need an adapter.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Holds two 13-32 inch monitors at up to 22 lbs each
- ✓ Free-standing steel base, no desk clamp or grommet hole needed
- ✓ +/-45 swivel, +/-10 tilt, and 360 rotation for portrait mode
- ✓ 31.5-inch (800mm) height adjustment range per the listing
Cons
- ✗ VESA support tops out at 100x100mm; larger patterns need an adapter
- ✗ 22 lb per-arm limit rules out many heavy or ultrawide monitors
- ✗ Wide base takes up more desk space than a clamp mount
- ✗ Tilt range limited to +/-10 degrees
Manufacturer description
The Bracwiser ML7802 Dual Monitor Stand holds two screens on one free-standing steel base, so you can get both displays off your desk without clamping or drilling. Each steel arm takes a 13 to 32 inch monitor and up to 22 lbs. It mounts to 75x75mm or 100x100mm VESA hole patterns, which covers most mainstream office and gaming displays. Before you order, check the four mounting holes on the back of your monitor. You can set each screen's angle for your seat. The arms allow +/-10 degrees of tilt and +/-45 degrees of swivel, and each screen rotates a full 360 degrees, so you can run one monitor…
SpecPicks Verdict
SpecPicks scored Dual Monitor Stand Free Standing Desk Mount Monitor Arm Fits Two… using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. Bracwiser's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will the Bracwiser ML7802 fit my monitor?
It fits monitors from 13 to 32 inches that weigh up to 22 lbs each and use a 75x75mm or 100x100mm VESA pattern. Measure the distance between the four holes on the back of your monitor to confirm.
Do I need to clamp or drill into my desk?
No. The ML7802 is a free-standing stand with a large steel base, so it sits on the desk surface without a clamp or grommet hole.
Can I rotate a monitor to portrait orientation?
Yes. Each mount rotates 360 degrees, and each arm also allows +/-45 degrees of swivel and +/-10 degrees of tilt.
How much height adjustment does it have?
The listing gives an 800mm (31.5 inch) height adjustment range for setting both screens at eye level.
Does it come with mounting hardware and a warranty?
Instructions and all the accessories needed for installation come in the box. The listing does not state warranty terms, so check with Bracwiser or the product listing for current coverage.
Key Features
- Strong steel arm mounts screens up to conveniently free up desk space. Each hold 13-32" monitor with a max load capacity 22lbs.
- Fits monitors with 75x75mm or 100x100mm VESA size (distance of 4 mounting holes on the back of the monitor).
- Feature +/-10 tilt, +/-45 swivel and 360 rotation, 800mm/31.5inch height adjustable for optimum viewing angle.
- Sturdy and large steel base is designed for safety and free standing.
- Comes complete with instructions plus all accessories needed for simple installation.
Full Specifications
| Brand | Bracwiser |
|---|---|
| Color | ML7802(BW) |
| Material | Alloy Steel |
| Mounting Type | swivel, tilt |
| Movement Type | Rotate, Swivel, Tilt |
| Built-In Media | 1*monitor mount, 1*mounting hardware, 1*user manual |
| Mfr Part Number | ML7802(BW) |
| Compatible Devices | Monitor |
| Enclosure Material | Alloy Steel |
| Maximum Tilt Angle | 10 Degrees |
| Maximum-Supported Screen Size | 32 Inches |
| Minimum-Supported Screen Size | 13 Inches |
Ready to buy?
Dual Monitor Stand Free Standing Desk Mount Monitor Arm Fits Two Screens up to 32 inch 22 lbs Fully Adjustable Arms with Max VESA 100x100mm (ML7802) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best Retro Console Reissues to Buy in 2026
- 768GB Intel Optane DIMM Rigs: Can Cheap Persistent Memory Really Run a 1T-Parameter LLM?
- DualSense vs 8BitDo Pro 2 vs GameSir G7 SE: PC Sim Racing
- Best Controller for Steam Deck and PC in 2026: 8BitDo vs GameSir vs DualSense
- Can an RTX 3060 12GB Still Run 2026's Local LLMs?
- PCI vs ISA Serial Cards on Windows 98 and DOS: Which Chipsets Actually Work
- Best SSD for the PS4 Pro in 2026: SATA Upgrade Guide
- Raspberry Pi 5 Secondary Monitor Setup Guide (2025)
- Best Wheel and Controller for Truck and Farm Sims in 2026
- Best Budget SSD for Gaming PC Builds in 2026: 5 Picks
- Samsung Winds Down Memory Output Before 18-Day Strike — SSD Price Watch
- Fable 5 as Manager: The Delegate-to-Sonnet-5 Cost Pattern
- SteamDSXL Yay or Nay? Dual-Screen Steam Deck Dock Review
- Qwen3.6 27B on a Single RTX 3060 12GB: Why MTP Drops Context From 137K to 14K
- Raspberry Pi 4 8GB vs Ryzen 5 2600 for Gemma 3 4B: Which Cheap Box Wins?
- Raspberry Pi 4 8GB as a Low-Power Quake 3 / OpenArena / UT99 Dedicated Server (2026 Build Log)
- Claude Sonnet 5: What Shipped and What It Means for Local Rigs
- Ryzen 9800X3D Idle Temp: What's Normal (2026 Guide)
- Run Qwen 3.6 27B Locally: What Fits on 12GB in 2026
- Best Budget PC Gaming Peripherals in 2026: 5 Picks That Punch Above Their Price
- Best Budget PC Upgrades Under $250 in 2026
- Gemini 3.5 Flash vs Local LLM on RTX 3060 12GB: When Cloud Beats Self-Hosted
- Ryzen 7 5800X3D vs Intel Core i7-14700K for DDR4 Gaming
- M3 Ultra vs RTX 4090 for local LLMs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090