Skip to main content
PCIE SATA Cards, Ports SATA III 6Gbps Controller Cards with Low Bracket, PCIE (1X 2X 4X 8X 16X) SATA3.0 Interface Expansion Cards for for Linux
Diyeeni

Diyeeni PCIE SATA Cards

Bottom line: The Diyeeni PCIE SATA Cards: Marvell 88SE9215 + JMB5XX chipset drives 8 SATA 3.0 ports at 6Gbps each; main trade-off: needs a PCIe v2.0 slot; v1.0 slots cap throughput around 250MB/s.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar expansion cards

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Marvell 88SE9215 + JMB5XX chipset drives 8 SATA 3.0 ports at 6Gbps each
  • ✓ Works in any PCIe 1X, 2X, 4X, 8X, or 16X slot - fits spare short slots
  • ✓ Plug-and-play with no driver install; supports AHCI boot from attached drives
  • ✓ Low-profile bracket included for small-form-factor and 2U chassis builds
  • ✓ Backward compatible with SATA 2.0/1.5G drives and PCI-Express v1.0 boards

Cons

  • ✗ Needs a PCIe v2.0 slot; v1.0 slots cap throughput around 250MB/s
  • ✗ Requires manual BIOS work: set SATA to AHCI and enable gen2 high-speed mode
  • ✗ Eight ports share one PCIe link, so simultaneous drive access splits bandwidth
  • ✗ Listing's OS support is vague - Windows 7/8/2003/2008 and Ubuntu only

Manufacturer description

Specification:Item Type:PCIE to SATA 3.0 CardModel:PCE8SATM01Master: Fit forMarvell 88SE92xx+JMB5XXInterface: PCIE 1X 2X 4X 8X 16XSupport System:Fit For Fit For UbuntuExpansion Interface: x SATA3.0 Interfaces Package List:1 x Expansion Card;1 x SemiHigh Baffle;1 x Driver Disc Note:PCIE must have a slot V2.0, V1.0 will not exceed 250M, PCIE can be X1 or X16 as long as it is V2.0 version, there is spare X16 slot directly into X16 slot on.BOIS setting of the motherboard: SATA mode should be changed to AHCI, although some motherboard PCIE is version 2.0, but BOIS does not enable highspeed mode…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Diyeeni PCIE SATA Cards using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. Diyeeni's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • 【 88SE9215 +JMB5XX Master】: Powerful chip 88SE9215 was adopted in this SATA sata expansion card, it make the SATA card more stable and compatible, supports each SATA 3.0 port transfer rate up to 6Gbps for AHCI boot and storage.
  • 【PCIE to 8 SATA】: This PCI SATA expansion card can be expanded to 8 SATA 3.0 6Gbps ports via Pcie X1 X2 X4 X8 X16 slots. No drivers needed, Easy to install, Plug and Play.
  • 【Wide Compatibility】: SATA Controller compatible with SATA6G, 3G and 1.5G hard drives. Fit for 7/8 / / / 2003 / 2008 Fit for Ubuntu support system, PCI-E 1X 2X 4X 8X 16X interface. Backward compatible with SATA2.0 SATA1.0; PCI-Express v2.0 compatible, backward compatible with PCI-Express v1.0.
  • 【Excellent Heat Dissipation】: Excellent heat radiator accelerate heat dissipation, ensure long-lasting high temperature and more stable . With a low Bracket, compatible with 99% size chassis on the market.
  • 【Motherboard BOIS Settings】: SATA mode should be changed to AHCI, some motherboards PCIE although 2.0 version, but the BOIS default does not open the high-speed transfer mode that (gen2 high speed mode), you need to manually open.

Full Specifications

BrandDiyeeni
StyleClassic
Weight6g
Style NameClassic
Model NumberPCIE8SATM01
CompatibilityLinux
Mfr Part NumberDiyeeni36i15tbasv
Compatible DevicesDevices running Windows 7, 8, XP, 10, and Ubuntu
Hardware InterfacePCI
Full listing titlePCIE SATA Cards, Ports SATA III 6Gbps Controller Cards with Low Bracket, PCIE (1X 2X 4X 8X 16X) SATA3.0 Interface Expansion Cards for for Linux

Ready to buy?

PCIE SATA Cards, Ports SATA III 6Gbps Controller Cards with Low Bracket, PCIE (1X 2X 4X 8X 16X) SATA3.0 Interface Expansion Cards for for Linux is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Expansion Cards

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
PCIE SATA Cards, Ports SATA III 6Gbps Controller Cards with Low Bracket, PCIE (1X 2X 4X 8X 16X) SATA3.0 Interface Expansion Cards for for Linux
View on Amazon →