EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans
Bottom line: The EZDIY-FAB PWM Fan Hub Controller/Splitter ($11.59 on Amazon as of 2026-10-21 10:18 UTC): Powers up to 10 fans from one motherboard PWM header; main trade-off: 3A total current cap limits high-draw fan setups.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Powers up to 10 fans from one motherboard PWM header
- ✓ SATA-powered, keeps fan draw off the mainboard
- ✓ FAN1 white port relays CPU fan RPM to the board
- ✓ EVA adhesive pad plus center screw hole for mounting
Cons
- ✗ 3A total current cap limits high-draw fan setups
- ✗ 3-pin fans run at full speed with no PWM control
- ✗ Only FAN1 reports RPM; the other 9 ports send none
- ✗ No speed readout for the nine standard fan ports
SpecPicks Verdict
SpecPicks scored EZDIY-FAB PWM Fan Hub Controller/Splitter using a rating × review-volume × price-fit model applied to published specs and reviews across the displays & upscalers category. EZDIY-FAB's displays & upscalers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for displays & upscalers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note: Max current limit is 3A in total, check the spec of fan first.
- In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
- There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
- Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control.
- If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.
Full Specifications
| Brand | EZDIY-FAB |
|---|---|
| Color | Black |
| Model | US-PWM fan hub |
| Voltage | 12 Volts |
| Material | Copper |
| Unit Count | 1 Count |
| Part Number | US-PWM fan hub |
| Compatibility | PC |
| Material Type | Copper |
| Smart Home Compatibility | Not Smart Home Compatible |
| Full listing title | EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans, SATA Power, Only Use One MB Header |
Ready to buy?
EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans, SATA Power, Only Use One MB Header is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Build a Self-Hosted Security Camera on a Raspberry Pi 4 8GB in 2026
- Lossless Scaling on Steam Deck: Is It Worth It?
- Best SATA SSD to Revive an Old Laptop: Crucial BX500 vs Samsung 870 EVO
- DualSense vs 8BitDo Pro 2 for PC Gaming in 2026
- DeepSeek V4 Pro at $0.04 a Task: When Local Still Beats the Cloud
- Best Gaming Monitor for 1440p in 2026
- Best AIO Liquid CPU Coolers for High-TDP Builds in 2026
- Best CPU Cooler for AM5 Ryzen 9 Overclocking (2026)
- Best Controller for Retro Emulation on PC: 8BitDo Pro 2 vs GameSir G7 SE
- UT99 OldUnreal 469 Patch in 2026: Migrate Configs, Rejoin Modern Servers, and Tune Mouse Precision
- ASRock Arc B580 12GB vs RTX 3060 12GB for 1440p Gaming in 2026
- Best SSDs for a Raspberry Pi homelab NAS in 2026
- Best Raspberry Pi Alternative in 2026: Pi vs Orange Pi vs Radxa
- Best Budget Gaming PC Parts Under $700 in 2026
- Building a Budget Local-AI Box: Ryzen 7 5800X + RTX 3060 12GB
- Best CPU for Streaming and Gaming on a Single PC in 2026
- Best USB Microphone for Game Streaming on Twitch (2026)
- Can a Raspberry Pi Zero W Run a Local LLM in 2026? A Tiny-Model Reality Check
- Gemini-Class Models on Local Hardware: How Much VRAM You Actually Need
- Kimi K2.7 Code on an RTX 3060 12GB: Can a $300 GPU Run It?
- Best AM4 CPU for Gaming in 2026: 5 Ranked Picks
- Strix Halo Clustering for Local LLMs: What the LocalLLaMA Reports Show
- Intel Arc Stable Diffusion Guide: Setup & Benchmarks 2025
- Best Budget Build for Local LLMs in 2026: How Far a Ryzen 5 5600G + RTX 3060 Gets You
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090