JSAUX
JSAUX SATA to USB Adapter Cable for 2.5” SSD/HDD Nylon Cord-Red
Bottom line: The JSAUX SATA to USB Adapter Cable for 2.5” SSD/HDD Nylon Cord-Red: UASP support delivers up to 70% faster transfers than standard USB 3.0; main trade-off: 2.5" drives only, 3.5" desktop HDDs are not supported.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ UASP support delivers up to 70% faster transfers than standard USB 3.0
- ✓ USB 3.0 bus-powered at 5Gbps, no wall adapter needed for 2.5" drives
- ✓ Trim and S.M.A.R.T. passthrough, so SSD health tools still read the drive
- ✓ Plug-and-play on Windows, macOS and Linux with no driver install
Cons
- ✗ 2.5" drives only, 3.5" desktop HDDs are not supported
- ✗ No IDE/ATA, mSATA or M.2 support, so retro and NVMe drives are out
- ✗ Bare cable with no enclosure, leaving the drive exposed during use
- ✗ Capped at USB 3.0 5Gbps, below 10Gbps USB 3.2 Gen 2 adapters
SpecPicks Verdict
SpecPicks scored JSAUX SATA to USB Adapter Cable for 2.5” SSD/HDD Nylon Cord-Red using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. JSAUX's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【Quickly Access a SATA SSD or HDD】: Add drive space to your laptop by connecting to a SATA 2.5" SATA SSD or HDD using this SATA to USB cable. You can connect to an external drive to add storage, perform backups, create disk images, implement data recoveries, and transfer content to your laptop
- 【5Gbps High Speed Output】: The SATA to USB adapter supports USB 3.0 super speed data transfer up to 5Gbps, but you can experience transfer speeds up to 70% faster than conventional USB 3.0 when connected to a computer that also supports UASP
- 【Important Note】: Can not available for 3.5” hard drive. Not compatible with ATA(IDE), MSATA, and M.2 interfaces. Please confirm your hard drive type before purchase
- 【Slim and Portable】: The hard drive USB adapter designed as portable as possible and tucks easily into the pocket of your laptop bag, you can use it anywhere with no external power required ( 2.5" SSD/HDD Only)
- 【Save Time】: The hard drive transfer cable lets you easily swap between drives with no need to install the drive inside an enclosure. It’s plug-and-play and doesn’t require drivers
Full Specifications
| Brand | JSAUX |
|---|---|
| Color | Red |
| Model | CD0028 |
| Wattage | 20 watts |
| Cable Type | USB |
| Item Shape | Round |
| Unit Count | 1 Count |
| Part Number | CD0028 |
| Connectivity | USB |
| Compatibility | Mac, Linux |
| Connector Type | Sata, Usb 3.0 a |
| Number of Pins | 9 |
| Number of Items | 1 |
| Special Feature | Portable |
| Connector Gender | Male-to-Male |
| Specification Met | FCC |
| Compatible Devices | Laptop, PC, Tablet |
| Data Transfer Rate | 5 gigabits_per_second |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Customer Package Type | Frustration-Free Package |
| Full listing title | JSAUX SATA to USB Adapter Cable for 2.5” SSD/HDD Nylon Cord-Red | USB 3.0 to 2.5” SATA III Hard Drive Adapter External Converter Supports UASP, Trim and Smart For Windows, MacOS and Linux |
Ready to buy?
JSAUX SATA to USB Adapter Cable for 2.5” SSD/HDD Nylon Cord-Red | USB 3.0 to 2.5” SATA III Hard Drive Adapter External Converter Supports UASP, Trim and Smart For Windows, MacOS and Linux is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best PC Couch-Gaming Setup in 2026: Controllers, Display, and Audio
- Samsung Winds Down Memory Output Before 18-Day Strike — SSD Price Watch
- Best SATA SSD for Gaming and Console Upgrades in 2026
- Best Starter Kit for Learning Robotics on Raspberry Pi (2026)
- Best Wireless Controller for PC Gaming in 2026
- Advanced Raspberry Pi Projects for Adults (2026 Guide)
- Crucial BX500 vs Samsung 870 EVO for Budget & Retro Builds
- Build a RetroPie Handheld with the Raspberry Pi Zero W in 2026: Full BOM + Setup
- Logitech Gaming Mouse Deals Hit 47% Off for Prime Day 2026
- Best Webcam for Streaming and Remote Work in 2026
- Raspberry Pi AI HAT+ Hits 26 TOPS for On-Device Inference
- LM Studio vs Jan.ai vs Ollama on an RTX 3060 12GB: Which Local Runner Wins?
- Running Mistral Leanstral 1.5 Locally on an RTX 3060 12GB
- Mistral Medium 3.5 Local Inference: VRAM, Quantization & Tokens/sec on Consumer GPUs
- Best Work-From-Home Kit for Gamers in 2026
- NVFP4 on RTX 50-Series: What llama.cpp's Native FP4 Support Means for Local Inference
- Crucial BX500 vs Samsung 970 EVO Plus: SATA vs NVMe
- ComfyUI on an RTX 3060 12GB: Flux and SDXL Speeds in 2026
- Best Mouse Pad for Office Productivity and Long Hours (2026)
- Local LLM Use Cases in 2026: What a 12GB Rig Actually Delivers
- DiffusionGemma Runs Locally: Google's Diffusion Text Model on a 12GB RTX 3060
- Revive a Dead Payphone with a Raspberry Pi Zero 2 W: Full Build Walkthrough
- Best Budget Local-AI Workstation Parts in 2026: 5 Picks
- llama.cpp MTP support landed - Qwen3.6 27B at 2.44× on a Strix Halo, 2.17× on a RTX 3090 rig
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090