HengTianMei Tin Lead 63/37 Rosin Core Low Temp Solder Wire
Bottom line: The HengTianMei Tin Lead 63/37 Rosin Core Low Temp Solder Wire: 63/37 eutectic alloy melts and sets at one temp (361F) with no plastic phase; main trade-off: contains lead, so it is not RoHS-compliant for resale electronics.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 63/37 eutectic alloy melts and sets at one temp (361F) with no plastic phase
- ✓ 0.8mm diameter suits circuit board pads and fine through-hole work
- ✓ 1.8% rosin flux core built in, no separate flux pen needed
- ✓ 50g/1.76oz spool fits a pocket or portable repair kit
Cons
- ✗ Contains lead, so it is not RoHS-compliant for resale electronics
- ✗ 50g spool is small for high-volume or production soldering
- ✗ 0.8mm is too fine for heavy-gauge wire and chassis-ground joints
- ✗ Rosin core leaves residue that needs isopropyl cleanup on visible boards
Manufacturer description
The HengTianMei 63/37 rosin core solder wire is a pocket-sized spool built for the kind of close-quarters electronics work that retro repair demands. The 63/37 tin-lead eutectic ratio melts and solidifies at a single temperature (361F/183C) with no plastic phase, so joints set fast and clean instead of going grainy while you hold a component steady. At 0.8mm diameter, the wire feeds precisely onto circuit board pads, motor terminals, and the small solder points found inside radios, televisions, video recorders, and stereo systems. The 1.8% rosin flux core is baked into the wire, so you get…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for HengTianMei Tin Lead 63/37 Rosin Core Low Temp Solder Wire, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "63/37 eutectic alloy melts and sets at one temp (361F) with no plastic phase"; the main trade-off is "Contains lead, so it is not RoHS-compliant for resale electronics". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Is this leaded or lead-free solder?
It is leaded: a 63/37 tin-lead alloy. Lead solder melts lower and wets more easily than lead-free, which is why retro and repair work favors it, but handle and ventilate accordingly.
What temperature should I set my soldering iron to?
The wire melts at 361F/183C. Most users run an iron well above the melt point for fast heat transfer; check your iron's manual and the solder listing for the manufacturer's recommended range.
How much solder do you actually get?
The spool holds 50g (1.76oz) of 0.8mm wire. That is a compact, pocket-size quantity aimed at repair and hobby work rather than production runs.
Do I need separate flux with this wire?
No. The wire has a rosin flux core at 1.8% by content, so flux is deposited at the joint as the solder melts. Extra flux can still help on oxidized or stubborn vintage pads.
What kind of projects is this solder wire good for?
The manufacturer lists radios, televisions, video recorders, stereo systems, wires, motors, and circuit boards. The 0.8mm gauge is best suited to component-level and through-hole work rather than heavy-gauge cable.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Best Content Ratio:not that the higher the tin content, the better the solder wire,the best ratio is 63/37 for use
- Tin Lead Solder Wire Parameters:solder wire 63/37,soldering wire with flux1.8%,electrical soldering wire dia 0.8mm/0.0315'',solder wire g.w 50g/1.76oz,good size for pocket.
- Rosin Core Solder Wire Feature:low melting point (361F/183°C),very good soldering capability,smoother welding process,soldering fast,strong soldering point and easier to use
- Applications:tin lead rosin core solder wire for electrical devices,esp for radios/televisions/video recorders/stereo systems/wires/ motors/circuit boards and other electronical devices etc
- we have a professional service team, ready to provide the best service for each customer, look forward to the start of cooperation, if you have any questions, please feel free to contact us
Full Specifications
| Size | 0.8mm/50g |
|---|---|
| Brand | HengTianMei |
| Weight | 50g |
| Material | lead |
| Part Number | HTMSW63370850 |
| Best Content Ratio | not that the higher the tin content, the better the solder wire,the best ratio is 63/37 for use |
| Package Dimensions | 5.43 x 3.78 x 0.67 inches |
| Batteries Included? | No |
| Batteries Required? | No |
| Item Package Quantity | 1 |
| Rosin Core Solder Wire Feature | low melting point (361F/183°C),very good soldering capability,smoother welding process,soldering fast,strong soldering point and easier to use |
| Tin Lead Solder Wire Parameters | solder wire 63/37,soldering wire with flux1.8%,electrical soldering wire dia 0.8mm/0.0315'',solder wire g.w 50g/1.76oz,good size for pocket. |
| Full listing title | HengTianMei Tin Lead 63/37 Rosin Core Low Temp Solder Wire For Electronics Components And DIY repair(0.8mm/50g) |
Ready to buy?
HengTianMei Tin Lead 63/37 Rosin Core Low Temp Solder Wire For Electronics Components And DIY repair(0.8mm/50g) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget SATA SSD for Gaming in 2026
- Best CPU for a Local-LLM Homelab Under $300 in 2026
- Raspberry Pi 5 IOMMU Support Lands in Mainline Linux: What It Means
- Intel Axes BigDL: What It Means for CPU and Arc LLM Inference
- Microsoft + Nvidia Agent PCs vs a DIY RTX 3060 12GB Local-Agent Box
- Best Local LLM You Can Run on 12GB of VRAM in 2026
- Best SSD and Controller Pairing for a Living-Room Gaming PC
- Intel Arc B580 for LLM Inference: What It Can Actually Do
- Orange Pi 5 Plus vs Raspberry Pi 5: The Honest Head-to-Head (2026)
- Best Budget Build for Local LLMs in 2026: How Far a Ryzen 5 5600G + RTX 3060 Gets You
- How to run Qwen 3 14B on NVIDIA GeForce RTX 4090
- A 2007 Samsung UMPC Becomes a Wii U Gamepad
- Fable 5 as Manager: The Delegate-to-Sonnet-5 Cost Pattern
- Qwen3.6-35B-A3B on an 8GB Laptop: What the Krasis Benchmark Means for Local Inference
- NVMe vs SATA for Game Load Times: WD Blue SN550 vs Crucial BX500 in 2026
- SNES Classic vs Sega Genesis Mini vs Raspberry Pi RetroPie: Best Plug-and-Play Retro Gaming in 2026
- Raspberry Pi 4 8GB vs Pi Zero W: Which Fits Your First Project?
- MLX engine comparison… and oMLX is the top choice.
- GeForce FX 5900 Won't POST or Crashes in WinXP: Troubleshooting Guide
- Best CPU for a Budget AI + Gaming Rig: Ryzen 7 5700X vs 5800X vs 5600G
- Active Unreal Tournament 99 Servers in 2026: Find, Join, Host
- ComfyUI on an RTX 3060 12GB: SDXL Throughput and VRAM Tuning
- Raspberry Pi OS Moves to Linux 6.18 LTS: Performance Gains for Pi 4 Owners
- Best Internal SSD for Gaming PC Build in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090