Skip to main content
4-in-1 welding tool set, soldering iron tip cleaner + 0.6mm solder wire (1.76 oz / 50 g) + Rosin Solder Flux Paste (0.35 oz / 10 g), no-clean soldering core (2.0mm, 29.5 inches)
YCD

YCD 4-in-1 welding tool set

Bottom line: The YCD 4-in-1 welding tool set: Brass tip cleaner works dry, no temperature drop like a wet sponge; main trade-off: no soldering iron included, consumables only.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For PC and retro-hardware cleaning and maintenance tools, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Brass tip cleaner works dry, no temperature drop like a wet sponge
  • ✓ Four consumables in one kit at 13.99 USD
  • ✓ 29.5 in of 2.0mm oxygen-free copper desoldering wick included
  • ✓ Rosin paste is low-residue, no post-solder cleanup step

Cons

  • ✗ No soldering iron included, consumables only
  • ✗ 50 g of solder wire runs out fast on bigger projects
  • ✗ Only 10 g of rosin flux paste in the kit
  • ✗ Single 0.6mm wire gauge, no thicker option for heavy joints

Manufacturer description

The YCD 4-in-1 welding tool set bundles the four consumables that stall a soldering session when one runs out: a brass-wire tip cleaner with base, 0.6mm solder wire, rosin flux paste, and a no-clean desoldering wick. The brass cleaner works dry, so it strips oxidation without the temperature drop a wet sponge causes every time you wipe a hot tip. The 1.76 oz (50 g) solder wire is spec'd for good fluidity and uniform heating, which is what gives you consistent joints instead of cold ones. The 0.35 oz (10 g) rosin paste promotes solder flow and leaves low residue, so no post-job cleanup step…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for YCD 4-in-1 welding tool set, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "Brass tip cleaner works dry, no temperature drop like a wet sponge"; the main trade-off is "No soldering iron included, consumables only". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does this kit come with a soldering iron?

No. The YCD set is a 4-in-1 consumables kit: brass tip cleaner with base, 0.6mm solder wire, rosin flux paste, and desoldering wick. You supply your own iron.

How much solder wire do you actually get?

1.76 oz (50 g) of 0.6mm solder wire. The kit also includes 0.35 oz (10 g) of rosin solder flux paste.

Is the desoldering wick long enough for a full board repair?

The no-clean core is 2.0mm wide and 29.5 inches long, made of pure oxygen-free copper. YCD rates it as removing more solder than traditional wicks on small PCB pads.

Do I need to clean the board after using the flux?

No. Both the rosin paste and the desoldering core are specified as low-residue, no-clean, so no cleaning step is required after the joint is made.

Is the brass tip cleaner better than a wet sponge?

It is designed to be. The brass wire cleaner is used dry, so it does not reduce the tip temperature the way a damp sponge does, and YCD describes it as cleaner than traditional sponges.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Soldering Iron Tip Cleaner - the best Soldering iron Tip Cleaner and base, no water,does not reduce the tip temperature. Made of brass wire, it is cleaner than traditional sponges. Safe and clean to use.
  • Solder wire - weight 1.76 oz / 50 g. Good fluidity, uniform heating, uniform solder joints, clean, contribute to the rapid completion of welding.
  • Rosin - weighs 0.35 oz/10 g. Promote the flow of solder, improve the efficiency of welding process, allow solder to form solid, less residue, no need to clean, lasting mechanical and electrical connections.
  • No-clean desoldering core - 2.0mm wide and 29.5 inches long, made of pure oxygen-free copper wire, it has strong ability to absorb tin. No cleaning, low residue. Removes more solder than traditional wicks, making it easy to correct errors on small PCB boards.

Full Specifications

BrandYCD
Weight1.76 oz
Unit Count4.0 Count
Model Number01
Number of Items4
Included ComponentsRosin solder paste flux, Soldering Iron Tip Cleaner, no-clean desoldering core, tin solder wire
Manufacturer Part Number01
Full listing title4-in-1 welding tool set, soldering iron tip cleaner + 0.6mm solder wire (1.76 oz / 50 g) + Rosin Solder Flux Paste (0.35 oz / 10 g), no-clean soldering core (2.0mm, 29.5 inches)

Ready to buy?

4-in-1 welding tool set, soldering iron tip cleaner + 0.6mm solder wire (1.76 oz / 50 g) + Rosin Solder Flux Paste (0.35 oz / 10 g), no-clean soldering core (2.0mm, 29.5 inches) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Tools & Maintenance

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →