YOUSHARES Mic Arm for QuadCast S
Bottom line: The YOUSHARES Mic Arm for QuadCast S: Dual suspension springs stop mic shake and sudden drops; main trade-off: 1.8-inch clamp limit rules out thicker desktops and butcher-block tops.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Dual suspension springs stop mic shake and sudden drops
- ✓ 360-degree rotation plus two-axis swivel mount for angle control
- ✓ Steel construction holds QuadCast S and Blue Yeti without sag
- ✓ Foam-padded C-clamp grips desks up to 1.8 inches without scratching
Cons
- ✗ 1.8-inch clamp limit rules out thicker desktops and butcher-block tops
- ✗ Microphone not included despite the QuadCast-focused naming
- ✗ No internal cable channel, so XLR or USB cable runs stay exposed
- ✗ Folding steel design adds visible desk hardware in on-camera setups
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for YOUSHARES Mic Arm for QuadCast S, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the streaming gear category before committing. On the listing's own facts, the case for it is "Dual suspension springs stop mic shake and sudden drops"; the main trade-off is "1.8-inch clamp limit rules out thicker desktops and butcher-block tops". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Perfect Effect - Suspension boom arm hold your HyperX QuadCast S / QuadCast 2 / QuadCast / SoloCast / Blue Yeti / Fifine AM8 / Rode / Shure / Razer / Gaming Mic in any position you want. No sag, just rock solid.
- Easy to Adjustment and Position - Rotates 360 degrees and a two axis swivel mount for giving you a perfect range of motion.
- Mic Stand - Dual suspension springs of each boom arm protect microphone from shaking, suddenly dropping. It's sturdy steel construction, easy to setup and Folding.
- Table Clamp Base - The C-clamp mount has a 1.8 inches maximum grip for attaching to a desk or tabletop. The sponge on the base could protect your table without any scratches when you swivel side screw.
- All-in-one Combo - Package includes QuadCast mic stand, table mounting clamp, 3/8" to 5/8" screw adapter. NOTE: Not included Hyperx Quadcast Microphone!
Full Specifications
| Brand | YOUSHARES |
|---|---|
| Color | 02 QuadCast Boom Arm |
| Style | Modern |
| Material | Alloy Steel |
| Base Type | Clamp |
| Model Name | Mic Arm for QuadCast S |
| Unit Count | 1 Count |
| Model Number | MPN_Mic_Stand_NB35_HyperX_03 |
| Material Type | Alloy Steel |
| Product Style | Modern |
| Maximum Height | 13 inches |
| Number of Items | 1 |
| Number of Packs | 1 |
| Body Material Type | Alloy Steel |
| Included Components | QuadCast mic stand, table mounting clamp, 3/8" to 5/8" screw adapter |
| Manufacturer Part Number | MPN_Mic_Stand_NB35_HyperX_03 |
| Microphone Stand Thread Size | 3/8 inch, 5/8 Inch |
| Maximum Weight Recommendation | 3.1 pounds |
| Full listing title | Mic Arm for QuadCast S - Boom Arm for HyperX QuadCast 2 QuadCast SoloCast, Blue Yeti, Fifine AM8, Rode, Shure, Razer, Gaming Mic and Most Microphones using 3/8" to 5/8" Adapter |
Ready to buy?
Mic Arm for QuadCast S - Boom Arm for HyperX QuadCast 2 QuadCast SoloCast, Blue Yeti, Fifine AM8, Rode, Shure, Razer, Gaming Mic and Most Microphones using 3/8" to 5/8" Adapter is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Alienware AW3426DW Review: QD-OLED Ultrawide Gaming at $699
- AI-Driven Driver Install on Win98: Using a Vision LLM to Recover a Voodoo3 PCI Card
- 42 LLMs Tested for Apocalypse Compliance: What Data Shows
- How to run Llama 3.1 8B on Apple M3 Ultra
- Claude Code Cut 80% of Its System Prompt: What Changes for Local Agent Rigs
- Ryzen 7 5700X vs Intel Core i7-9700K: Best Budget Streaming + Gaming CPU in 2026
- Solar-Powered Bird Identifier: Raspberry Pi Zero 2W + AI Camera
- 4K 60Hz or 1440p 240Hz? Picking a Monitor for an RTX 3060-Class GPU
- Best Budget Gaming Monitor Under $300 in 2026
- Prime Intellect's $130M raise: build your own agent rig
- Building a MAME Fighting Setup: Fight Stick + CF Storage for an Arcade Corner
- Building a Period-Correct 2001 GeForce 3 + Windows 98 SE Gaming Rig
- Building a Period-Correct 2001 GeForce 3 Windows 98 SE Rig — With a CompactFlash Boot Drive
- Logitech Prime Day Peripheral Deals Hit 47% Off — What Is Actually Worth Buying
- ASRock Phantom Gaming 360 LCD Cooler Debuts With Strong Numbers
- RTX 3060 12GB vs Arc B580 12GB for Local LLMs in 2026
- GPT-5.6 Sol Reportedly Cracks a 30-Year Statistics Conjecture in 90 Minutes
- How to Identify Any Vintage GPU: A Visual + GPU-Z Guide for Retro PC Builders
- Best PlayStation and PC Controllers for 2026
- Raspberry Pi Projects for Beginners: 6 No-Solder Builds
- RetroPie Handheld 3D Print Guide: Cases, Settings & Parts
- 768GB Intel Optane DIMM Rigs: Can Cheap Persistent Memory Really Run a 1T-Parameter LLM?
- ROG Ally X vs Steam Deck OLED: 2026 Buying Guide
- Best Streaming Starter Kits in 2026: Mic, Light, Capture, and the One-Box Builds
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090