Skip to main content
MOOKEERF BNC Cable - 3FT 2PCS RG58 50 ohm Male to Male Coax Cables Low Loss BNC Extension Coaxial Cable with for Antennas, RF Radios, Modems, Oscilloscopes, Spectrum, etc (Black)
MOOKEERF

MOOKEERF BNC Cable

Bottom line: The MOOKEERF BNC Cable: Solid copper center conductor with bonded foil plus tinned copper braid shielding; main trade-off: 3ft length is too short for remote antennas or long cable runs.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar display & crt accessories

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Solid copper center conductor with bonded foil plus tinned copper braid shielding
  • ✓ Rated 1.15 VSWR at 450MHz for low reflected power on VHF/UHF gear
  • ✓ 2.2-inch adhesive-lined heat shrink stops connectors from pulling out
  • ✓ Two 3ft cables per pack, BNC male on both ends
  • ✓ Carries RF and video signals; 50 ohm suits radios and test equipment

Cons

  • ✗ 3ft length is too short for remote antennas or long cable runs
  • ✗ Thin RG58 loses more signal over distance than heavier coax
  • ✗ 50 ohm impedance is a mismatch for 75 ohm video gear
  • ✗ Male-to-male only; female, SMA or UHF ports need separate adapters

Manufacturer description

The MOOKEERF BNC Cable 2-pack gives you two 3ft lengths of RG58 50 ohm coax with a BNC male connector on each end. You can link a ham radio to an antenna, run a signal generator into an oscilloscope, or patch RF and video gear on your bench without extra adapters. Each cable has a solid copper center conductor inside bonded aluminum foil and a tinned copper braid. That double shield is how the cable reaches its rated VSWR of 1.15 at 450MHz. Low VSWR matters when you feed a VHF/UHF transceiver or scanner and want little power reflected back. The tinned braid also resists oxidation and…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored MOOKEERF BNC Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the display & crt accessories category. MOOKEERF's display & crt accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for display & crt accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this BNC cable work with my oscilloscope or signal generator?

Yes. Each cable has a BNC male plug on both ends and is 50 ohm RG58, which matches the BNC jacks on most oscilloscopes, signal generators and spectrum analyzers. The listing names oscilloscopes and spectrum analyzers as intended uses.

Can I use it to connect a retro CRT monitor or other video equipment?

The listing says the cable carries both RF and video signals. It is 50 ohm cable, though, and most analog video gear is built for 75 ohm. For impedance-matched video connections, a 75 ohm BNC cable is the better fit.

Is it good as an antenna jumper for ham or two-way radio?

It is sold for two-way radio, ham radio, HF/VHF radios, receiver antennas and scanners. Its rated VSWR is 1.15 at 450MHz. At 3ft, it works best as a short jumper between a radio and a nearby antenna, tuner or meter, not as a long feed line.

How is the cable shielded, and will the connectors come loose?

The center conductor is solid copper. The shield is bonded aluminum foil plus a tinned copper braid. Each connector is covered by a 2.2-inch heat-shrink sleeve with an adhesive lining, which helps keep the plug from pulling off the cable.

What comes in the package?

You get two black RG58 BNC male-to-male cables, each 3ft long. Check the product listing for current warranty terms.

Key Features

  • [LOW LOSS] - This low loss bnc cable is made of highly tinned copper braid shields and pure copper which could maximum protect the signal over large distance.
  • [LOW VSWR] - The VSWR of this bnc coax cable is 1.15 on 450MHZ. The bnc cable doesn't introduce static nor interference when inserting your devices and 100% highly shield performance.
  • [Well Built Structure] - The inner conductor of this rg58 bnc cable is made of solid copper, the outer conductor is made of bonded Aluminum foil and tinned copper braid. It could be better in resist oxidation and corrosion.
  • [Prevent Fall Apart Connector] - Compared with other bnc cable, our heating shrinking tube is up to 2.2 inches and built with inner adhesive. It could support professionally connection between cable and adapters without worrying about connector pull out.
  • [Applications] - This bnc male to bnc male cable is support to transfer both RF and video signals. It is an ideal for Two Way Radio, Ham Radio, Hf/Vhf radio, BNC receiver antennas, Antenna Extension, Radio Scanner, Amateur Radio and so on.

Full Specifications

BrandMOOKEERF
ColorBlack
ModelRG58-BNC-JJ-3ft-2pcs
Frequency1000 MHz
Cable TypeCoaxial
Item ShapeRound
Model NameRG58-BNC-JJ
Unit Count2 Count
Item Length3 Feet
Part NumberRG58-BNC-JJ
Connector TypeBnc Male to Bnc Male
Number of Pins2
Outer MaterialPolyvinyl Chloride (PVC)
Number of Items2
Special FeatureBraided
Connector GenderBNC Male to BNC Male
Compatible DevicesAmateur Radio, Antenna Extension, BNC receiver antennas, Ham Radio, etc., Radio Scanner
Indoor Outdoor UsageIndoor, Outdoor
Customer Package Type[STANDARD_BOX_OR_ENVELOPE]
Compatible Phone ModelsNo Compatible Phone Models
Full listing titleMOOKEERF BNC Cable - 3FT 2PCS RG58 50 ohm Male to Male Coax Cables Low Loss BNC Extension Coaxial Cable with for Antennas, RF Radios, Modems, Oscilloscopes, Spectrum, etc (Black)

Ready to buy?

MOOKEERF BNC Cable - 3FT 2PCS RG58 50 ohm Male to Male Coax Cables Low Loss BNC Extension Coaxial Cable with for Antennas, RF Radios, Modems, Oscilloscopes, Spectrum, etc (Black) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Display & CRT Accessories

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
MOOKEERF BNC Cable - 3FT 2PCS RG58 50 ohm Male to Male Coax Cables Low Loss BNC Extension Coaxial Cable with for Antennas, RF Radios, Modems, Oscilloscopes, Spectrum, etc (Black)
View on Amazon →