Zyxel 24 Port Network Ethernet Switch
Bottom line: The Zyxel 24 Port Network Ethernet Switch is a specs-and-price decision rather than a crowd-consensus one in the networking category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by ZYXEL's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored Zyxel 24 Port Network Ethernet Switch using a rating × review-volume × price-fit model applied to published specs and reviews across the networking category. ZYXEL's networking lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for networking of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- FULL POE+ ON ALL 24 PORTS WITH 170W BUDGET AND 2x SFP UPLINKS: All 24 RJ-45 ports support IEEE 802.3at PoE+ up to 30W each with intelligent consumption mode, next to 2x GbE SFP slots for fiber uplinks
- SMART FAN TEMPERATURE-CONTROLLED COOLING: Built-in smart fan adjusts automatically on device temperature (22.1-45.4 dBA) for near-silent operation while managing heat under full PoE load
- INTELLIGENT POE POWER MANAGEMENT: Default consumption mode allocates only the power each device actually needs from the 170W budget, maximizing the number of APs, cameras, and VoIP phones powered
- SMART MANAGED LAYER 2 FEATURES: Web GUI and ZON Utility deliver VLAN (up to 4K), QoS, IGMP Snooping, LACP, Scheduled PoE with time range, STP/RSTP/MSTP, DoS prevention, and SNMP v1/v2/v3 management
- RACK-MOUNT READY WITH IPv6 AND JUMBO FRAME SUPPORT: Includes rack mounting kit for standard 19-inch rack installation, supporting 9K jumbo frames and full IPv6 dual-stack management throughout
Full Specifications
| Brand | ZYXEL |
|---|---|
| Color | Information Not Available |
| Platform | DOS |
| Interface | Uplink Port |
| Unit Count | 1 Count |
| Switch Type | PoE |
| Model Number | GS1900-24HPv2 |
| Compatibility | Switch |
| Maximum Power | 206.5 watts |
| Built-In Media | 24-port GbE Smart Managed PoE Switch with GbE Uplink, Power Cord, Rack Mounting Kit |
| Mfr Part Number | GS1900-24HPV2 |
| Number of Items | 1 |
| Number of Ports | 24 |
| Compatible Devices | Desktop |
| Data Transfer Rate | 24 gigabits_per_second |
| Included Components | 24-port GbE Smart Managed PoE Switch with GbE Uplink, Power Cord, Rack Mounting Kit |
| Warranty Description | lifetime Manufacturer |
| Item Dimensions L x W x H | 10.6"L x 17.4"W x 1.7"H |
| Full listing title | Zyxel 24 Port Network Ethernet Switch | Smart Managed PoE+ | GS1900-24HPV2 | 24x GbE PoE+ with 170W Budget + 2x SFP Ports, VLAN, QoS, IGMP Snooping, Rack Mount Kit Included, TAA Compliant |
Ready to buy?
Zyxel 24 Port Network Ethernet Switch | Smart Managed PoE+ | GS1900-24HPV2 | 24x GbE PoE+ with 170W Budget + 2x SFP Ports, VLAN, QoS, IGMP Snooping, Rack Mount Kit Included, TAA Compliant is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Networking
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Run DeepSeek Locally on a 12GB RTX 3060: 2026 Quant Guide
- Retro Games With 1:1 Remakes: The Faithful Rebuild List
- Steam Deck: Linux's Trojan Horse for PC Gamers
- Linux vs Windows 11: AMD Ryzen 9 9950X3D Performance
- Best Budget SATA SSD for a Steam Game Library in 2026
- Samsung 870 EVO vs WD Blue SN550: Best Storage for Forza Horizon 6 Fast Loading
- Flux.2-Klein Pipeline: Real-Time Webcam AI at 30 FPS
- Sound Blaster G6 in a Period-Correct WinXP Build: Modern USB DAC Meets Vintage Hardware
- Best SSD for PS5 Storage Expansion Under $100 (2026)
- Putting a Modern SATA SSD in a Win98/XP Retro Build via an IDE Bridge
- OpenAI Now Uses AI to Red-Team Its Own Models: What It Means for Local Setups
- Building a 1999 GeForce 256 + Pentium III Win98 Rig in 2026
- Raspberry Pi Projects on GitHub: 2025 Guide
- llama.cpp vs Ollama on an RTX 3060: Which Runs GLM-5.2 Faster?
- Best Streaming Starter Kits in 2026: Mic, Light, Capture, and the One-Box Builds
- First PC Build Guide: Components, Budget & Aesthetics
- Can You Run Kimi K3 Locally? VRAM Math for the New Open Model
- From AWE32 to BlasterX G6: The Sound Blaster Lineage for Modern Retro Rigs
- Best Gaming Monitors for Console and PC in 2026
- Use a Raspberry Pi 4 as a Second Monitor or KVM in 2026
- Qwen 3.6 35B-A3B on RTX 3060 12GB: Local LLM Throughput Guide (2026)
- 3dfx Voodoo2 SLI on Windows 98 SE: Period-Correct Build, Glide Driver Setup, and Real Quake 3 Benchmarks
- Running Qwen3.5/3.6 with NextN MTP on an RTX 3090 Ti
- Build a Sub-$60 Air Quality Monitor on a Raspberry Pi 4 (CO₂, PM2.5, VOC)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090