Skip to main content
Heavy Duty Adjustable Boom Arm Microphone Stand
Luling Arts

Heavy Duty Adjustable Boom Arm Microphone Stand

Bottom line: The Luling Arts Heavy Duty Adjustable Boom Arm Microphone Stand: 5-section steel arm with 0.55 in tubing resists sag; main trade-off: included shock mount does not fit the Blue Yeti.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar streaming gear

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 5-section steel arm with 0.55 in tubing resists sag
  • ✓ Supports microphones up to 4.4 lb
  • ✓ Desk clamp fits desks up to 2.7 in (70 mm) thick
  • ✓ Headset hook built into the desk clamp
  • ✓ Includes shock mount, dual-screen pop filter and 3/8 and 5/8 adapters

Cons

  • ✗ Included shock mount does not fit the Blue Yeti
  • ✗ Shock mount only fits 52 mm diameter mic bodies
  • ✗ Desks thicker than 2.7 in need a different mount
  • ✗ Clamp is the only mounting option listed, with no grommet mount

Manufacturer description

The Luling Arts Heavy Duty Adjustable Boom Arm Microphone Stand keeps your mic where you put it. It holds up to 4.4 lb, and its five-section steel arm uses 0.55-inch tubing instead of the thinner 0.39-inch tube found on older four-section arms. That means far less dip or sag once you position it for streaming, podcasting or voiceover. The redesigned desk clamp grips 47.5 cm² of surface, up from 38 cm², and fits desks up to 2.7 inches (70 mm) thick. A headset hook is built into the clamp, and an extra adjustment screw keeps the mic body from springing upward. You get everything in one box…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Luling Arts Heavy Duty Adjustable Boom Arm Microphone Stand using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. Luling Arts's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this boom arm work with a Blue Yeti?

Yes. The arm's 5/8-inch connector screws straight into the Blue Yeti's own mount. The included shock mount does not fit the Yeti, so use the mic's stock base mount instead.

How thick a desk can the clamp attach to?

The clamp fits desks up to 2.7 inches (70 mm) thick. Its contact area is 47.5 cm², up from 38 cm² on the previous design.

How much weight can the arm hold without drooping?

Luling Arts rates it for up to 4.4 lb. The arm uses five steel sections with 0.55-inch tubing to keep the mic from dipping or sinking once you set it.

Which mics fit the included shock mount?

The shock mount takes microphones with a 52 mm body diameter. Elastic rope suspension holds the mic in place and keeps it from falling out.

Can I mount a webcam or ring light instead of a microphone?

Yes. The included 5/8-inch to 1/4-inch adapter fits standard 1/4-inch threads, including the Blue Yeti Nano, Logitech webcams, cameras and ring lights.

Key Features

  • 4.4lb Max Load Mic Arm:Luling Arts mic arm with Shock mount is made of 5pcs sturdy steel,is not the old 4pcs thin steel tube in the market.the thickness of its arm tube is improved from 0.39 inches to 0.55 inches,sturdy enough to keep mic well placed, no "dip" or "sink". Freely adjust the boom arm.
  • Upgraded Microphone Arm Desk Mount :This new microphone arm desk mount contact area from 38 cm² to 47.5 cm²,Easily clip to any desk up to 2.7''/70mm thick.the headset hook is integrated into the desk clamp, added flexible adjustment screw adjust mic body stand prevent pop up.
  • Mic Stand with Shock Mount :Please noted the shock mount is not fit for Blue Yeti,support hole diameter of 52mm mics. protect the microphone all-around with high rubber rope design which makes the microphone more convenient to install and prevent it from falling. the filter with 2 screen can blocks and dissipates air blasts, reducing its velocity to get good sound.
  • Two Universal Compatibility Microphone Boom Arm Adapter: Wide Compatibility 5/8 connector compatible by Blue Yeti,hyper x ,Shure,Blue Snowball,Fifine, AT2020USB+ mics and other Mics standard shock mounts.1/4 connector compatible blue yeti nano,Logitech Webcam,Camera,RingLight.
  • Arm Kits All in One Bulk:Package includes all the items you need for studio recording and live sound, a microphone stand, a table mounting clamp, a 3/8" to 5/8" metal screw adapter to make it perfect for blue yeti and other microphones, 5/8" to 1/4" adapter for blue yeti nano,a pop filter, a shock mount and cable ties, easy to assemble and carry.

Full Specifications

BrandLuling Arts
ColorBlack
StyleDesk Mic Arm
Weight4.4lb
MaterialAlloy Steel
Base TypeSteel
Unit Count1 Count
Finish TypeMatte
Model NumberLA20
Material TypeAlloy Steel
Product StyleDesk Mic Arm
Number of Items1
Body Material TypeAlloy Steel
Included ComponentsMicrophone Stand, Table Mounting Clamp, 3/8" to 5/8" Metal Screw Adapter, 1/4" to 5/8" Metal Screw Adapter, Pop Filter, Shock Mount, Cable Ties, Mic Clip Holders
Warranty Description90
Manufacturer Part NumberLA20
Microphone Stand Thread Size3/8 inch, 5/8 Inch
Maximum Weight Recommendation4.4 pounds

Ready to buy?

Heavy Duty Adjustable Boom Arm Microphone Stand is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Streaming Gear

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Heavy Duty Adjustable Boom Arm Microphone Stand
View on Amazon →