Skip to main content
TONOR Microphone Boom Arm, Adjustable Microfono Stand Mic Arm with Extra-large Pop Filter, 3/8’’ and 5/8’’ Screwadapter, Equipment for Podcast, Recording, Streaming, 40 cm +40 cm +20 cm Riser, T50
TONOR

TONOR Microphone Boom Arm

Bottom line: The TONOR Microphone Boom Arm: 40 cm + 40 cm arm sections reach across wide desks; main trade-off: desk clamp opening size not listed; measure thick or lipped desks first.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar streaming gear

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 40 cm + 40 cm arm sections reach across wide desks
  • ✓ 20 cm riser lifts the arm above monitors to keep sightlines clear
  • ✓ Rated for 2 kg at a 90-degree angle for heavier mic and shock mount setups
  • ✓ 180-degree pop filter fits mics up to 7.5 cm, incl. Blue Yeti and AT2020
  • ✓ 3/8 in and 5/8 in threads for nearly any mic or shock mount pairing

Cons

  • ✗ Desk clamp opening size not listed; measure thick or lipped desks first
  • ✗ 2 kg cap leaves little headroom for heavy broadcast mics plus shock mounts
  • ✗ Pop filter tops out at 7.5 cm diameter; wider mic bodies won't fit
  • ✗ No cable management clips or channels mentioned in the listing

Manufacturer description

The TONOR T50 microphone boom arm is built for desks where a standard arm can't get the mic where you need it. Two 40 cm arm sections give you a long reach, and the included 20 cm riser lifts the whole assembly so it can span monitors or wider desks without blocking your view. The arm holds 2 kg at a 90-degree angle, and TONOR says it is built to withstand tens of thousands of repositioning pulls, so your mic stays where you set it instead of drooping mid-stream. The springs sit inside the tubing, which gives the arm a cleaner look on camera and keeps them from snagging. The kit includes a…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored TONOR Microphone Boom Arm using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. TONOR's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will the TONOR T50 boom arm hold a Blue Yeti?

Yes. The arm supports 2 kg at a 90-degree angle, and TONOR lists the Blue Yeti as compatible with the included 180-degree pop filter, which fits mics up to 7.5 cm in diameter. Add your mic's weight to the weight of any shock mount and make sure the total stays under 2 kg.

How far does the T50 arm reach?

The arm has two 40 cm sections, plus a 20 cm riser that raises the base. The riser lets the arm clear monitors or reach across wider desks.

What thread sizes does the T50 support?

It has both 3/8 in and 5/8 in screw threads, so it works with standard microphone mounts and shock mounts from most brands.

Does the pop filter fit an Audio-Technica AT2020 or a TONOR Q9?

Yes. TONOR names both the AT2020 and the TONOR Q9 as compatible. The 180-degree curved filter fits microphones up to 7.5 cm in diameter.

How thick a desk can the T50 clamp onto?

The listing doesn't give the clamp's maximum opening. Check the product listing or contact TONOR before buying if your desk is especially thick or has a lip or crossbar under the edge.

Key Features

  • Enhanced Compatibility: Equipped with a 20cm extension rod, it can adapt to wider desks or span across monitors, ensuring that the microphone and boom arm do not obstruct your view, allowing you to adjust the microphone to the perfect position. It provides you with enhanced desktop space. Moreover, it comes with both 3/8'' and 5/8'' screw holes, making it compatible with any microphone and shock mount combination.
  • Reliable Structure: Experience high reliability with our rock-solid construction. Designed to withstand tens of thousands of pulls and support an impressive 2kg load at a 90° angle, you can say goodbye to the hassle of a wobbly microphone.
  • 180° Extra-large Pop filter: The boom arm set includes a 180° curved pop filter, effectively reducing airflow noise from a broad range of angles. It offers compatibility with various microphone types, accommodating a maximum diameter of 7.5cm.
  • 180° Extra-large Pop Filter: The boom arm set includes a 180° curved pop filter, effectively reducing airflow noise from a broad range of angles. It offers compatibility with various microphone types, accommodating a maximum diameter of 7.5cm. This includes popular models like Blue Yeti, AT2020, and TONOR Q9.
  • Cutting-edge design: With its hidden spring design, this boom arm ingeniously incorporates high-strength springs inside the tubing, resulting in a sleek and stylish appearance. Not only does it enhance durability, but it also elevates the overall user experience.

Full Specifications

BrandTONOR
ColorBlack
Weight2kg
MaterialAcrylonitrile Butadiene Styrene (ABS), Alloy Steel
Set NameT50
Base TypePedestal
Model NameT50
Finish TypePainted or Powder Coated
Model Number23067
Material TypeAcrylonitrile Butadiene Styrene (ABS), Alloy Steel
Product StyleT50
Item Type NameMicrophone Stand
Maximum Height20 centimeters
Item Dimensions17.52 x 9.33 x 3.15 inches
Body Material TypeAlloy Steel, Acrylonitrile Butadiene Styrene (ABS)
Included ComponentsMic Clip, Pop Filter, 3/8" to 5/8" Adapter, Upgraded Heavy Duty Clamp
Warranty Description2 year after-sale warranty.
Manufacturer Part Number23067
Item dimensions L x W x H17.52 x 9.33 x 3.15 inches
Microphone Stand Thread Size3/8 inch, 5/8 Inch
Full listing titleTONOR Microphone Boom Arm, Adjustable Microfono Stand Mic Arm with Extra-large Pop Filter, 3/8’’ and 5/8’’ Screwadapter, Equipment for Podcast, Recording, Streaming, 40 cm +40 cm +20 cm Riser, T50

Ready to buy?

TONOR Microphone Boom Arm, Adjustable Microfono Stand Mic Arm with Extra-large Pop Filter, 3/8’’ and 5/8’’ Screwadapter, Equipment for Podcast, Recording, Streaming, 40 cm +40 cm +20 cm Riser, T50 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Streaming Gear

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
TONOR Microphone Boom Arm, Adjustable Microfono Stand Mic Arm with Extra-large Pop Filter, 3/8’’ and 5/8’’ Screwadapter, Equipment for Podcast, Recording, Streaming, 40 cm +40 cm +20 cm Riser, T50
View on Amazon →