EG STARTS Games Joystick/Hotas Chair Mount Compatible
Bottom line: The EG STARTS Games Joystick/Hotas Chair Mount Compatible: Joystick and throttle plates adjust for both height and distance; main trade-off: clamps to the majority of gaming chairs, not all chair frames.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Joystick and throttle plates adjust for both height and distance
- ✓ Two-mount setup converts an existing gaming chair into a HOTAS cockpit
- ✓ Fits Thrustmaster Warthog, T.16000M FCS, TCA Airbus, VKB Gunfighter, Logitech X56/X52
- ✓ Also compatible with Brunner, CH Products, Saitek, Virpil and Winwing gear
- ✓ Quick-attach, quick-remove design for stowing between sim sessions
Cons
- ✗ Clamps to the majority of gaming chairs, not all chair frames
- ✗ Listing does not state a weight limit for heavier metal-base sticks
- ✗ No warranty terms published in the product listing
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for EG STARTS Games Joystick/Hotas Chair Mount Compatible, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the joysticks & game port category before committing. On the listing's own facts, the case for it is "Joystick and throttle plates adjust for both height and distance"; the main trade-off is "Clamps to the majority of gaming chairs, not all chair frames". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- The mounting plates for joystick and throttle valve can be adjusted and fixed in height and distance.
- Compatible with Brunner, CH Products, Logitech, Saitek, Thrustmaster, VKB, Virpil and Winwing systems.
- Can be directly attached to the majority of gaming chairs.
- Equipped with two mounts setup (joystick and throttle), to transform your own chair into a stable cockpit without major changes.
- The chair mount can be quickly attached and removed,
Full Specifications
| Brand | EG STARTS |
|---|---|
| Color | Red and White |
| Model Name | RM |
| Model Number | ZuoYi-ZJ001 |
| Power Source | Corded Electric |
| Button Quantity | 28 |
| Controller Type | Joystick |
| Item Dimensions | 15.3 x 9.6 x 1.6 inches |
| Hardware Platform | PC |
| Compatible Devices | Windows |
| Additional Features | Detachable, Adaptable |
| Connectivity Technology | USB |
| Manufacturer Part Number | B0BK144SKT |
| Full listing title | EG STARTS Games Joystick/Hotas Chair Mount Compatible for Thrustmaster A10C Hotas Warthog T.16000M FCS & TCA Officer Pack Airbus & VKB Gunfighter MK & Logitech X56 X52 Flight Simulation Controller |
Ready to buy?
EG STARTS Games Joystick/Hotas Chair Mount Compatible for Thrustmaster A10C Hotas Warthog T.16000M FCS & TCA Officer Pack Airbus & VKB Gunfighter MK & Logitech X56 X52 Flight Simulation Controller is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Joysticks & Game Port
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- How to Run DeepSeek-R1 32B on Apple M4: Which Mac You Need + Real tok/s
- Best 1440p Monitor for the RTX 3060 in 2026: Picks That Actually Match
- Forza Horizon 6 Is the Highest-Rated Game of 2026: What Metacritic's 94 Says About Where Racing Sims Are Going
- Best Raspberry Pi Starter Kit for Beginners in 2026
- GLM-5.2's Long-Horizon Agent Mode: Running It Locally in 2026
- GameSir G7 SE vs DualSense for PC Gaming: Which Controller Wins?
- Intel llm-scaler-vllm 1.4: Arc Pro B70 Inference Support Lands
- Best GPU for Training CNNs at Home in 2026: The RTX 3060 12GB Case
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5070
- Best Budget SSD for Gaming and PC Upgrades in 2026
- Strix Halo Gaming Benchmarks: What AMD's APU Can Really Do
- Best Budget Gaming SSDs Under $100 in 2026
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5070
- Best SATA SSD for Gaming and Everyday Upgrades in 2026
- Inkling 975B Open Weights: What a Frontier Speech Model Means for Local Rigs
- Running GLM-5.2 Locally on an RTX 3060: Ollama VRAM + tok/s
- Best Internal SSDs for Gaming PCs (2026)
- Raspberry Pi AI HAT+ 2: 40 TOPS Hailo-10H Specs and Verdict
- Fish Audio S2.1 Pro vs Local TTS on an RTX 3060
- Custom Steam Controller Startup: Reviving OG Big Picture Mode
- 007: First Light Is Great on Steam Deck
- Adafruit Reverse-Engineers the Creative Katana V2X Soundbar
- Best CPU Coolers for AMD Ryzen in 2026: 5 Picks Ranked
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Throughput in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090