Micro ATX Case PC Case: MATX Case DTX Mini PC ITX Desktop Computer Case Support Micro ATX MATX DTX ITX Mini PC
Bottom line: The Micro ATX Case PC Case: MATX Case DTX Mini PC ITX Desktop Computer: Compact 7.3L chassis fits Micro ATX (24.4x24.4cm) and Mini ITX (17x17cm) boards; main trade-off: half-height graphics cards only; full-size GPUs will not fit.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Compact 7.3L chassis fits Micro ATX (24.4x24.4cm) and Mini ITX (17x17cm) boards
- ✓ Stands vertically or lies horizontally for desk, shelf, or under-monitor setups
- ✓ Front I/O with 2x USB 3.0, 2x USB 2.0, HD audio jack, and power button
- ✓ FLEX-Small 1U PSU support (15x4x8cm) keeps the footprint tight
- ✓ 0.8mm SPCC steel body; holds 2x 2.5in drives or 1x 3.5in drive
Cons
- ✗ Half-height graphics cards only; full-size GPUs will not fit
- ✗ CPU cooler clearance only 63-73mm, and it shrinks when drives are installed
- ✗ Needs a FLEX 1U power supply; standard ATX units are not an option
- ✗ No front USB-C port; front I/O is USB-A only
SpecPicks Verdict
SpecPicks scored Micro ATX Case PC Case: MATX Case DTX Mini PC ITX Desktop Computer… using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. JOYJOM's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Micro ATX Case: The case is only 7.3L, supports vertical and horizontal placement. Fits for Micro ATX Mohterboard (24.4x24.4cm) and ITX Motheroard (17x17cm)
- Compatibility Accessories: supports FLEX-Small 1U Power Supply (15*4*8cm), Half-Height Graphics Card without HDD, Hard Disk(2x2.5inch SSD, or 1x3.5inch SSD), CPU Cooler(63mm-73mm depends on SSD)
- Material: The Body of Case is made of 0.8mm SPCC
- Interface on Front Panel: 2xUSB3.0, 2xUSB2.0, HD Audio, Power Button
- 【Packing Include】1* Micro ATX Case and some Screws
Full Specifications
| Brand | JOYJOM |
|---|---|
| Color | Black |
| Fan Size | 17 centimeters |
| Material | Alloy Steel |
| Case Type | Desktop |
| Model Name | MATX Case |
| Model Number | MATX Case |
| Compatibility | PC |
| Cooling Method | Air |
| Item Type Name | Micro ATX Case |
| Micro ATX Case | The case is only 7.3L, supports vertical and horizontal placement. Fits for Micro ATX Mohterboard (24.4x24.4cm) and ITX Motheroard (17x17cm) |
| Mfr Part Number | MATX Case |
| Number of Items | 1 |
| Total Usb Ports | 2 |
| Compatible Devices | [Micro ATX Motherboards, 1U Power Supplies, Half-Height Graphics Cards] |
| Enclosure Material | Alloy Steel |
| Total USB 2.0 Ports | 2 |
| Total USB 3.0 Ports | 2 |
| Hard Disk Form Factor | 3.5 inches |
| Supported Motherboard | Micro ATX |
Ready to buy?
Micro ATX Case PC Case: MATX Case DTX Mini PC ITX Desktop Computer Case Support Micro ATX MATX DTX ITX Mini PC is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best PC Couch-Gaming Setup in 2026: Controllers, Display, and Audio
- Can a Raspberry Pi 4 8GB Run Local LLMs in 2026? Ollama tok/s + SSD-Boot Setup
- MAYFLASH F300 vs GameSir G7 SE: Best Controller for PC Fighting Games (2026)
- Claude Opus 4.8 Raised the Bar — Best Local Coding LLMs for a 12GB RTX 3060
- Intel Arc GPU for Stable Diffusion: Setup & Benchmarks
- Grok 4.3 vs GPT-5 vs Claude 4.7: Local Hardware Implications of the Closed-Model Intelligence Index
- Is Your First Homelab Right? A 2026 Hardware Sanity Check on a Ryzen 5 5600G
- What Fits in 12GB VRAM? RTX 3060 Local LLM Model Guide (2026)
- Unified RAM for LLMs: 2025-2026 Hardware Guide
- Corsair's New Gaming Mouse Has a Dedicated Stream Deck Launch Button
- Cursor Launches Its Own AI Model and Git Platform: What Changes
- KOORUI 27" QD-Mini LED vs Samsung Odyssey 27" 4K: Which 4K Panel for Console + PC?
- Microsoft Signals 32GB RAM as the Windows 11 Gaming Baseline
- Quietest AM4 CPU Cooler in 2026: Noctua NH-U12S vs DeepCool AK620 vs AC Infinity
- Started a Homelab Last Month — Is the Ryzen 5 5600G Build Right?
- Cursor vs Cline vs Aider for Local-First AI Coding in 2026
- Best USB Microphones for Streaming and Podcasting (2026)
- Raspberry Pi OS Gets a Desktop Refresh: What Changes for Pi 4 Users
- Run Home Assistant on a Raspberry Pi 4 8GB in 2026 (SSD Boot)
- Self-Hosted Jellyfin on a Raspberry Pi 4 8GB: What 1080p Transcoding Really Costs
- Samsung 256GB microSD Drops to $47.99 — 40% Off Storage Deal
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5070
- MSI MPG 322UR QD-OLED X24: 4K 240Hz Performance Analyzed
- Ryzen AI Max vs RTX 4060: Which Fits Your Build?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090