ZOTEK ZT-702S 2 in 1 Handheld Digital Automotive Oscilloscope Multimeter
Bottom line: The ZT-702S 2 in 1 Handheld Digital Automotive Oscilloscope Multimeter: Oscilloscope and multimeter in one 2.8-inch IPS color unit, switched by a single button; main trade-off: ±400V scope input ceiling limits work on higher-voltage industrial rails.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Oscilloscope and multimeter in one 2.8-inch IPS color unit, switched by a single button
- ✓ 48MSa/s sampling with 8ns/div to 20S/div sweep covers automotive sensor waveforms
- ✓ 9999-count meter reads to 999.9V DC, 750V AC, 9.999A, 99.99MOhm
- ✓ CAT III 1000V / CAT II 600V rated with dual 200mA and 10A ceramic fuses
- ✓ Built-in 2000mAh battery and USB-C that works while charging and exporting data
Cons
- ✗ ±400V scope input ceiling limits work on higher-voltage industrial rails
- ✗ Single channel only, so you cannot compare two waveforms side by side
- ✗ 2.8-inch screen is cramped for reading fine waveform detail
- ✗ Feature-dense menu (trigger modes, time-base calibration, export) has a learning curve
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for ZT-702S 2 in 1 Handheld Digital Automotive Oscilloscope Multimeter, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "Oscilloscope and multimeter in one 2.8-inch IPS color unit, switched by a single button"; the main trade-off is "±400V scope input ceiling limits work on higher-voltage industrial rails". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 2.8-inch IPS full-view color screen oscilloscope multimeter:Trigger Function Auto/Nomal/Single, ±400V input, automatic measurement scan, 200mv/div-10v/div vertical sensitivity,8/50ns/div-20S/div horizontal scan range, 20ppm time base Accuracy digital oscilloscope
- Dual mode design of oscilloscope and multimeter: one-button switch mode 、automatic obtain waveform, time base calibration, data storage, data export, language selection, shutdown time setting, backlight adjustable, data transmission port, 3V-1kHZ square wave output, memory and other functions, easy to operate, Improve work efficiency. digital oscilloscope multimeter widely used in automotive, industrial equipment, sensors, heavy electrical equipment, finishing and low voltage systems.
- Multimeter Tester Mode: 9999 counts; AC voltage: 0-750V; DC voltage: 0-999.9V; DC/AC current: 0-9.999A; resistance: 0-99.99MΩ; capacitance: 0-9.999mF ; Frequency: 0-99.99kHZ; Temperature: -20°C-1000°C, diode, continuity measurement. It is suitable for voltage tester instrument of household, school, shopping mall, and laboratory circuit system, and can also be used for digital multimeter of socket, switch, lamp and low-voltage circuit.
- Safety overload protection:conforms to CTA III 1000V, CTA II 600V safety level, meets CE certification requirements, A/D high sampling conversion, 200mA-10A double ceramic fuse, ABS+TPE double injection molding process, strong Durable.
- A multi-purpose Automotive oscilloscope multimeter equipped with a 1X2000mAh power supply and USB charging cable. The charging and data transmission channels share a TP-C interface, which can also be used during charging. Equipped with a 4V/1KHz square wave signal generator, product size: 6.97-3.51-1.57In.
Full Specifications
| Brand | ZOTEK |
|---|---|
| Color | Black Red |
| Model | ZT-702S |
| Style | oscilloscope multimeter(9999Counts) |
| Style Name | oscilloscope multimeter(9999Counts) |
| Part Number | 702S |
| Connectivity | USB |
| Power Source | Battery Powered |
| Compatibility | Switch |
| Item Dimensions | 6.97 x 3.5 x 1.57 inches |
| Measurement Type | Oscilloscope,Multimeter |
| Specification Met | CE |
| Compatible Devices | Electrical devices with circuits |
| Included Components | 1 |
| Full listing title | ZT-702S 2 in 1 Handheld Digital Automotive Oscilloscope Multimeter, Diode Tester,multimeter auto rangin48MSa/s High Sampling Rate,Amp Ohm Volt Meter Tester、Voltage/Current Test |
Ready to buy?
ZT-702S 2 in 1 Handheld Digital Automotive Oscilloscope Multimeter, Diode Tester,multimeter auto rangin48MSa/s High Sampling Rate,Amp Ohm Volt Meter Tester、Voltage/Current Test is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Govee vs DAYBETTER vs KSIPZE: Best LED Strip for Desk and Monitor Bias Lighting
- Open-WebUI Self-Hosted on a Ryzen 5 5600G + RTX 3060: A Private ChatGPT at Home
- RTX 5070 Ti vs RTX 5090 for Local LLMs: 16GB vs 32GB
- Best Home Office Monitor Under $200 (2026)
- STEPLA-1 8-Bit Hardwired CPU: 74-Series Logic Explained
- Best Budget SATA SSD for Gaming and Boot Drives in 2026
- IPEX-LLM + Ollama vs a CUDA RTX 3060 Rig
- Used RTX 3090 Home AI Rig Build: Parts, Real Speeds and November 2026 Prices
- Best Handheld Gaming PC Under $200 in 2026
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Streaming in 2026
- Sound Blaster Audigy 2 ZS vs Aureal Vortex 2: The Last Great Win98 Audio Battle
- Best 12GB GPU for Local LLMs in 2026
- First Homelab Setup: Hardware, Security & Networking Guide
- Open-Source NVIDIA NVK Vulkan Driver Adds DLSS Support: What It Means for RTX 3060 Owners
- Logitech G502 Hero in 2026: Is the FPS Mouse King Still Worth It?
- Logitech G502 Hero vs Modern FPS Mice: Is the Classic Still Worth It in 2026?
- Best Storage for a Windows 98 Retro PC: CompactFlash vs IDE-to-USB SSD Adapters
- Gunnir Arc B580 vs RTX 5090D on DeepSeek: The Budget AI-Rig Upset Explained
- Intel Arc for Stable Diffusion: VRAM, Setup & Benchmarks 2025
- Best Controller for Retro Emulation on PC: 8BitDo, GameSir, DualSense
- How to Build a Fully Declarative Homelab Stack
- Best Gaming Mouse for FPS Esports Under $80 (2026)
- Step 3.7 Flash vs Gemma 4 12B: Which Local Model Wins on a 12GB GPU?
- Microsoft Now Recommends 32GB RAM for Gaming in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090