Skip to main content
ErGear Dual Monitor Stand up to 33 inches Screen, Load-Bearing Max 22 lbs Each Arm, Adjustable Dual Monitor Mount, Sturdy Steel vesa Monitor Mount with Stable VESA 75x75 100x100mm
ErGear

ErGear Dual Monitor Stand up to 33 inches Screen

Bottom line: The ErGear Dual Monitor Stand up to 33 inches Screen ($28.49 on Amazon as of 2026-10-06): Handles screens up to 33 inches and 22 lbs per arm, covering most 32-inch panels; main trade-off: requires 75x75mm or 100x100mm VESA holes; no adapter for VESA-less monitors.

$28.49

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $28.49 Compare to similar home & kitchen

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Handles screens up to 33 inches and 22 lbs per arm, covering most 32-inch panels
  • ✓ Lifts monitors up to 17.5 inches above the desk for true eye-level alignment
  • ✓ 360-degree rotation lets you flip either screen to portrait for code or documents
  • ✓ Ships with both C-clamp and grommet hardware, no separate purchase needed

Cons

  • ✗ Requires 75x75mm or 100x100mm VESA holes; no adapter for VESA-less monitors
  • ✗ ErGear only recommends wooden desks, ruling out glass and some composites
  • ✗ Desk beams or under-panels can block the clamp and grommet mounting points
  • ✗ Monitors under 4.4 lbs fall below the arm's rated weight range

Manufacturer description

The ErGear Dual Monitor Stand mounts two displays up to 33 inches each on a single steel gas-spring arm system, clamping to your desk instead of eating it. Each arm carries 4.4 to 22 lbs, so it handles everything from a light 24-inch IPS panel to a heavier 32-inch curved gaming display, provided your monitor has 75x75mm or 100x100mm VESA holes on the back. Positioning is the point here: the arms lift screens as high as 17.5 inches above the desk to bring them to eye level, extend 17.5 inches toward you, swivel a full 90 degrees left and right, tilt from +90 to -35 degrees, and rotate 360…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored ErGear Dual Monitor Stand up to 33 inches Screen using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. ErGear's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this fit my 32-inch monitor?

Yes, as long as it meets all three conditions: screen size between 17 and 33 inches, weight between 4.4 and 22 lbs, and VESA mounting holes spaced 75x75mm or 100x100mm on the back.

How do I attach it to my desk?

Two options are included. The C-clamp fits desk edges 0.39 to 2.56 inches thick, and the grommet mount fits 0.39 to 2.17 inches. ErGear recommends wooden desks with no beams or panels under the mounting spot.

Can I rotate a monitor to portrait mode?

Yes. Each arm offers 360-degree rotation, so you can run either screen in landscape or portrait. It also swivels 90 degrees left and right and tilts from +90 to -35 degrees.

How high and how far forward will it position my screens?

The arms reach 17.5 inches above the desk surface and extend the screens up to 17.5 inches toward you.

Is it stable enough to hold position over time?

The steel construction is tested for 20,000 adjustment cycles to hold screens in place while still moving smoothly. Check the product listing for current warranty terms.

Key Features

  • Computer Compatibility - To ensure compatibility of the dual monitor stand, each of your monitors must meet three conditions: Firstly, computer screen size range: 17 to 33 inches. Secondly, screen weight range: 4.4 to 22 lbs. Thirdly, there must be VESA mounting holes on the back of the monitor screen that are spaced 75x75 mm or 100x100 mm apart. Please make sure that your monitor meets all of the above conditions before purchasing.
  • Maximum Flexibility - The monitor stand features +/-90° left and right swivel for multi-screen co-driving, +90° to -35° up and down tilt for your office comfort, and 360° swivel for landscape and portrait modes.
  • Height & Extension Adjustment - The dual monitor arm for 2 monitors can be positioned as high as 17.5″ above the desk surface, allowing you to raise your screens closer to eye level for more comfort. The flexible arms can extend the screens 17.5″ closer to you for a more immersive viewing experience.
  • Easy to install - The structured monitor stand is very easy to install, you can choose C-clamp or grommet hole as needed. For the sake of using experience, please check if your table meets the following three conditions: Material first, we only recommend wooden table. Table form secondly, The bottom of the table should preferably be free of any beams or panels that may interfere with installation. Table thickness thirdly,'C' clamp fits 0.39"-2.56" while grommet mount fits 0.39"-2.17".
  • Advanced Technology -Tested for 20,000 cycles, our dual monitor arm holds the screen securely in place while allowing for smooth, easy adjustments. Additionally, the long service life of it will enhance your experience.

Full Specifications

BrandErGear
ColorBlack
MaterialMetal
Unit Count1 Count
Model NumberEGDS15B
Mounting TypeC-Clamp & Grommet Base
Movement TypeTilt, Swivel,Rotate, Height adjustment
Mfr Part NumberEGDS15B-US
Number of Packs1
Compatible DevicesMonitor
Enclosure MaterialMetal
Maximum Tilt Angle90 degrees
Warranty Description2
Maximum-Supported Screen Size32 inches
Minimum-Supported Screen Size32 inches
Full listing titleErGear Dual Monitor Stand up to 33 inches Screen, Load-Bearing Max 22 lbs Each Arm, Adjustable Dual Monitor Mount, Sturdy Steel vesa Monitor Mount with Stable VESA 75x75 100x100mm

Ready to buy?

ErGear Dual Monitor Stand up to 33 inches Screen, Load-Bearing Max 22 lbs Each Arm, Adjustable Dual Monitor Mount, Sturdy Steel vesa Monitor Mount with Stable VESA 75x75 100x100mm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $28.49

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Related Home & Kitchen

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
ErGear Dual Monitor Stand up to 33 inches Screen, Load-Bearing Max 22 lbs Each Arm, Adjustable Dual Monitor Mount, Sturdy Steel vesa Monitor Mount with Stable VESA 75x75 100x100mm
$28.49
View on Amazon →