EZDIY-FAB
EZDIY-FAB 12VHPWR PSU Sleeved Cable
Status: EZDIY-FAB 12VHPWR PSU Sleeved Cable: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The EZDIY-FAB 12VHPWR PSU Sleeved Cable: Native 12+4 pin 12V-2x6 plug fits RTX 5080/5070 Ti/4090/4080/4070 Ti; main trade-off: not officially supported on RTX 5090 due to power draw.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:
Similar: CableMod E-Series Pro ModMesh Sleeved 12V-2x6… — $24.90 on Amazon as of 2026-10-21 16:24 UTC (price may vary).
Similar: CableMod RT-Series Pro ModMesh Sleeved 12V-2x6… — $24.90 on Amazon as of 2026-10-21 10:24 UTC (price may vary).
Similar: CableMod Universal Pro ModMesh Sleeved 12V-2x6… — $29.90 on Amazon as of 2026-10-20 22:22 UTC (price may vary).
Pros & Cons
Pros
- ✓ Native 12+4 pin 12V-2x6 plug fits RTX 5080/5070 Ti/4090/4080/4070 Ti
- ✓ True 16AWG tinned copper wire rated for full 600W delivery
- ✓ 5 pre-installed cable combs keep the run flat and organized
- ✓ Single PSU-to-GPU cable cuts adapter clutter on ATX 3.1 builds
Cons
- ✗ Not officially supported on RTX 5090 due to power draw
- ✗ Needs a PSU with a native 12VHPWR/PCIe 5.0 output port
- ✗ 60cm length may be tight in full-tower or reverse-connector cases
- ✗ Pure white only, no other sleeve colors listed
SpecPicks Verdict
SpecPicks scored EZDIY-FAB 12VHPWR PSU Sleeved Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. EZDIY-FAB's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Next-Gen GPU Compatibility: Built for PCIe 5.1 & 12V-2x6 Graphics Cards Designed for modern GPUs with native 16-pin (12+4) power connectors, compatible with RTX 5080, 5070 Ti, 4090, 4080, 4070 Ti and other PCIe 5.0 / PCIe 5.1 graphics cards
- Stable 600W Power Delivery: True 16AWG Copper Wire Construction Made with 16AWG tinned copper wire and durable alloy copper terminals to support up to 600W power delivery for high-performance gaming PCs and workstation systems
- Clean & Premium Cable Management: Sleeved Cable with Pre-Installed Cable Combs Includes 5 pre-installed cable combs for improved cable routing and a clean, organized appearance, helping create a streamlined PC build
- Direct PSU to GPU Connection: Simplified Single-Cable GPU Power Solution Connects directly from compatible PCIe 5.0 / ATX 3.1 power supplies to GPUs with native 16-pin power ports, reducing cable clutter while maintaining a clean setup
- Compatibility & Safety Notice: Compatibility Notice for RTX 5090 GPUs Designed for graphics cards using native 12VHPWR or 12V-2x6 connectors. Due to the extreme power demands of RTX 5090 GPUs, use with RTX 5090 systems is not officially supported
- Premium Pure White Sleeving: Features high-quality pure white sleeved design that enhances the aesthetic appeal of your PC build while providing durable protection for the internal wiring
Full Specifications
| Brand | EZDIY-FAB |
|---|---|
| Color | Pure White |
| Gauge | 16 |
| Model | EZDPR192-5 |
| Wattage | 600 watts |
| Cable Type | PCI-e 5.0 |
| Item Shape | Round |
| Unit Count | 1 Count |
| Part Number | EZDPR192-5 |
| Compatibility | PC |
| Connector Type | Pci Express |
| Number of Pins | 16 |
| Maximum Current | 50 A |
| Maximum Voltage | 12 volts |
| Number of Items | 1 |
| Special Feature | 16AWG Copper Wire, 600W Power Delivery, Braided, PCIe 5.1 Compatible, Pre-Installed Cable Combs |
| Connector Gender | Male-to-Male |
| Specification Met | 12v-2x6, 12vhpwr, Atx 3.1, Pcie 5.0, Pcie 5.1 |
| Compatible Devices | RTX 3090Ti, 4070Ti, 4080, 4090, and other 40' series GPUs with a 12+4 pin female interface |
| Data Transfer Rate | 16 gigabits_per_second |
| Full listing title | EZDIY-FAB 12VHPWR PSU Sleeved Cable, 12V-2x6, 600W, 60cm, Pure White | 12+4 Pin Male-Male, Direct PSU-to-GPU, 16AWG GPU Power Cable, Cable Combs Included, Clean Cable Routing, RTX 40/50 Series |
Ready to buy?
Amazon shows no buyable offer for EZDIY-FAB 12VHPWR PSU Sleeved Cable at the last check. A similar in-stock product is CableMod E-Series Pro ModMesh Sleeved 12V-2x6…. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Best Raspberry Pi for Klipper in 2026: Pi 4 8GB vs Alternatives
- Mount a 90s Big-Box CD-ROM ISO on Win98 Without a CD Drive
- Troubleshooting Local LLM Inference on Raspberry Pi 4 8GB and Pi 5: OOM, Swap, Quantization Crashes, and…
- Bigme Color E-Ink Monitor: 60 FPS and 4096 Colors Explained
- OG NeoGeo Stick vs 8BitDo SN30 Pro: Which Feels More Period-Correct for Fighting Games in 2026?
- Windows XP Gaming Setup Guide: Hardware & Drivers (2025)
- Best Gaming Mouse Pad for FPS Esports (2026)
- Intel Arc AI Image Generator: 2025 Setup & Performance Guide
- OpenAI Codex Now Records and Replays Your Workflow: the Local-Rig Angle
- Build a PiKVM V3 Device for Remote Server Management (2026)
- Best Gaming Headset for PS5 and PC in 2026
- How to run Qwen 3 32B on Arc B580
- Ryzen AI Max for Local LLMs: What the Hardware Enables
- Ryzen 7 5800X3D vs 5800X: Does 3D V-Cache Beat Raw Clocks for Gaming?
- Best Sim Racing Wheel for Beginners: G29 vs HORI vs Thrustmaster
- LLM-Driven Driver Install on Windows 98, 2000, and XP: Vision-LLM Walkthroughs from a 4-PC Retro Fleet
- Qwen3.7-Plus Goes Agentic: Cloud Model vs Your Local 12GB Rig
- Best SSD to Upgrade a PS4 Pro: Samsung 870 EVO vs Crucial BX500
- RTX 3060 12GB vs RX 7600 XT for Local LLMs: The Cheap Inference Card to Buy in 2026
- Gemini 3.6 Flash Shipped: Why Local Builders Still Reach for a 12GB GPU
- Data Center CPU Demand Surge: AI Agents and the GPU Ratio Shift
- Crucial BX500 vs Samsung 970 EVO Plus: SATA vs NVMe
- Halloween Talking Prop: Qwen3 4B on Jetson Orin Nano Super vs Raspberry Pi 5 16GB
- Best Budget GPU for Local LLM Inference Under $400 (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090