Skip to main content
4 Pin RGB Adapter for Corsair RGB Hub, Commander CORE, Commander Core XT and Lighting Node Pro, 4pin RGB Splitter Sleeved Cable, Connect to 5V 3-Pin ARGB Devices 7-in (Pack of 2
COMeap

COMeap 4 Pin RGB Adapter for Corsair RGB Hub

Bottom line: The COMeap 4 Pin RGB Adapter for Corsair RGB Hub: Converts Corsair 4-pin RGB headers to standard 5V 3-pin ARGB, no iCUE workaround needed; main trade-off: chained adapters all mirror one lighting effect instead of running independently.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Converts Corsair 4-pin RGB headers to standard 5V 3-pin ARGB, no iCUE workaround needed
  • ✓ Works with Commander CORE, CORE XT, Lighting Node CORE and Corsair RGB HUB
  • ✓ Verified compatible with Lian Li Strimer Plus lighting kits
  • ✓ Sleeved 7-inch cable keeps the run tidy inside crowded cases

Cons

  • ✗ Chained adapters all mirror one lighting effect instead of running independently
  • ✗ Must occupy the last RGB HUB or Lighting Node CORE port or it clones the next fan
  • ✗ Only 7 inches long, so top-mount or far-side devices may need an extension
  • ✗ Locked to Corsair controllers, useless on Asus, MSI or Gigabyte ARGB headers

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for COMeap 4 Pin RGB Adapter for Corsair RGB Hub, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "Converts Corsair 4-pin RGB headers to standard 5V 3-pin ARGB, no iCUE workaround needed"; the main trade-off is "Chained adapters all mirror one lighting effect instead of running independently". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 『RGB Adapter for Corsair Commander CORE』Only designed for Corsair RGB HUB, Lighting Node CORE, Commander CORE, and Commander CORE-XT. It is fully compatible with Lian Li Strimer Plus.
  • 『4 Pin RGB to ARGB Converter』The 4pin RGB splitter sleeve cable controls the LED of any standard ARGB device through Corsair iCUE, creating charming lighting effects!
  • 『Flexibility Control』Flexibly use this adapter with splitters and hubs to manage multiple ARGB devices simultaneously. (Please note that if multiple adapters are used in sequence, they will all present the same lighting effect.)
  • 『3 Pin ARGB Fan Hub』This adapter cable is compatible with all 5V 3-pin ARGB connectors (5V, DATA, N/A, GND) ARGB fan. (Please carefully check if your ARGB fan has the same connector.)
  • 『NOTE』For users of Corsair RGB HUB and Lighting Node CORE, please ensure that this adapter occupies the last port in the Corsair RGB HUB or Lighting Node CORE sequence when connecting to iCUE. Otherwise, it will replicate the lighting effect of the next pirate fan in the sequence.

Full Specifications

BrandCOMeap
ModelCOMeap-4PinRGB-7in
Cable TypeDisplay Port
Unit Count2 Count
Item Length18 centimeters
Connector Type5v 3-pin Argb Adapter
Number of Pins4
Maximum Voltage5 volts
Number of Items2
Special FeatureSleeved
Connector GenderMale-to-Female
Compatible DevicesCorsair RGB HUB, Lighting Node CORE, Commander CORE-XT, Lian Li Strimer Plus
Indoor Outdoor UsageIndoor
Warranty Description1 Year Manufactuere
Compatible Phone ModelsNo Compatible Phone Models
Other Special Features of the ProductSleeved
Full listing title4 Pin RGB Adapter for Corsair RGB Hub, Commander CORE, Commander Core XT and Lighting Node Pro, 4pin RGB Splitter Sleeved Cable, Connect to 5V 3-Pin ARGB Devices 7-in (Pack of 2

Ready to buy?

4 Pin RGB Adapter for Corsair RGB Hub, Commander CORE, Commander Core XT and Lighting Node Pro, 4pin RGB Splitter Sleeved Cable, Connect to 5V 3-Pin ARGB Devices 7-in (Pack of 2 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →