HOKMOKQOK
Solder Flux, 559 No Clean Soldering Flux Paste, Lead Free Rosin Flux,10cc Tacky Soldering Flux,Soldering Liquid Flux for Electronics,For BGA,SMD,USB Socket Repairing (50ml)
Bottom line: The Solder Flux, 559 No Clean Soldering Flux Paste, Lead Free Rosin is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 2. Halogen-free, viscous general, yellow color, transparent residue after welding.
- ✓ Backed by HOKMOKQOK's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored Solder Flux, 559 No Clean Soldering Flux Paste, Lead Free Rosin… using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. HOKMOKQOK's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 1. A traditional classic model flux paste, using hydrogenated rosin for and a variety of active agents made of high-temperature mixing.
- 2. Halogen-free, viscous general, yellow color, transparent residue after welding.
- 3. To help soldering quickly on the tin, reduce the damage to the components of high-temperature welding, BGA tin planting can stick to the tin ball, so that the solder joints full, bright.
- 4. Rosin Solder Flux 559 Used for conventional components welding or desoldering circuit board components.
- 5. Each support solder paste net content of 10ML. Each support solder paste with 5 push rod and 10 needles.
Full Specifications
| Brand | HOKMOKQOK |
|---|---|
| Color | 50ml |
| Material | lead |
| Part Number | DP17 |
| Connectivity | USB |
| Power Source | hand_powered |
| Package Dimensions | 6.14 x 4.72 x 1.18 inches |
| Included Components | 10 needles, 559 Solder Flux, Dispensing Tip, Pneumatic Dispenser with Plunger |
| Item Package Quantity | 1 |
Ready to buy?
Solder Flux, 559 No Clean Soldering Flux Paste, Lead Free Rosin Flux,10cc Tacky Soldering Flux,Soldering Liquid Flux for Electronics,For BGA,SMD,USB Socket Repairing (50ml) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- AMD Ryzen 7 7700X3D Lands as a Newegg Exclusive at $329
- RTX 3060 12GB vs RTX 4060 for 1080p Gaming: Which Wins in 2026?
- Best Sim Racing Gear for Beginners in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X: Which Wins for Budget 1080p Gaming?
- This DIY 'Steam Controller Puck' Emulates Xbox, Switch & PS Pads
- KOORUI 27" QD-Mini LED vs Samsung Odyssey 27" 4K: Which 4K Panel for Console + PC?
- Best Budget Gaming Headset Under $60: Turtle Beach Recon 50 vs BERIBES vs TAGRY
- Best Budget Gaming PC Build Parts in 2026: 5 Core Picks
- Best Budget SSD for Gaming and PC Upgrades in 2026
- Best Raspberry Pi 5 Home Lab Cluster Setup for Self-Hosting (2026)
- 007: First Light Is Great on Steam Deck
- Sega's TMSS Explained: The Lock-Out Chip Behind the Genesis, and Why It Still Trips Up Reissues
- Best Controller for PC AAA Gaming in 2026
- Best PC Cooling Solutions for AM4 and AM5 Builds in 2026
- GPT-5.6 Sol Matches Fable 5 at 1/3 Cost: Local-Rig Fallout
- GLM-5.2 Local: What GPU Actually Runs the Top Open-Weights LLM
- AMD Ryzen 7 9800X3D Bundle: DDR5 + MSI B850 Wi-Fi 7 Guide
- GLM-5.2 on an RTX 3060 12GB: Can a Budget Card Run Long-Horizon Agents?
- Rescue Your Retro PC's Data Before the IDE or SATA Drive Dies
- Oomwoo Is a New Open-Source Robot Vacuum You Can 3D Print
- Self-Host Jellyfin on a Ryzen 5 5600G Mini Build in 2026: Measured Power and Transcoding
- US Government Forces Anthropic to Disable Claude Fable 5 Worldwide
- Best USB Microphone for a Raspberry Pi Project YouTube Channel (2026)
- OpenAI and Anthropic Are Giving Startups Free Compute — Here's the Local Rig That Replaces It
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090