Thermaltake
Thermaltake Ceres 300 Matcha Green Mid Tower E-ATX Computer Case
Bottom line: The Thermaltake Ceres 300 Matcha Green Mid Tower E-ATX Computer Case ($114.99 on Amazon as of 2026-10-06): Three CT140 140mm fans preinstalled: two ARGB Sync up front, one at the rear; main trade-off: rear CT140 fan is non-ARGB, so lighting is front-only out of the box.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Three CT140 140mm fans preinstalled: two ARGB Sync up front, one at the rear
- ✓ Over 55% of panels perforated for high-volume airflow
- ✓ Fits a 360mm radiator up front and a 280mm radiator on top
- ✓ Room for up to five 140mm fans or seven 120mm fans
- ✓ ARGB syncs with ASUS, GIGABYTE, MSI and ASRock motherboard software
Cons
- ✗ Rear CT140 fan is non-ARGB, so lighting is front-only out of the box
- ✗ Optional 3.9-inch LCD display is sold separately
- ✗ Top radiator support caps at 280mm, so no 360mm up top
- ✗ Heavily perforated panels can let more dust and fan noise through
Manufacturer description
Ceres 300 TG ARGB Matcha Green Mid Tower Chassis is an ATX case that comes with two CT140 ARGB Sync PC Cooling Fans pre-installed at the front and one CT140 PC Cooling Fan pre-installed at the rear. Its RGB lighting can be controlled by motherboard software from ASUS, GIGABYTE, MSI, and ASRock. More than 55% of its panels are perforated to provide a large amount of airflow. Besides, up to five 140mm fans or seven 120mm fans can be installed in the chassis, and one 360mm radiator can be placed at the front and up to one 280mm radiator can be placed at the top of the chassis to provide…
SpecPicks Verdict
SpecPicks scored Thermaltake Ceres 300 Matcha Green Mid Tower E-ATX Computer Case using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. Thermaltake's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Perforated panel allows massive airflow for excellent cooling performance
- Supports up to 360mm radiator at the front & 280mm at the top
- Two CT 140 ARGB Sync Fans at front & One CT140 Fan at rear preinstalled
- Rotational PCIe Slots
- Optional 3.9"inches LCD display available
Full Specifications
| Brand | Thermaltake |
|---|---|
| Color | Matcha Green |
| Fan Size | 14 centimeters |
| Material | SPCC, Tempered Glass |
| Case Type | Mid Tower |
| Model Name | Ceres 300 Matcha Green |
| Light Color | Green |
| Model Number | Ceres 300 TG ARGB |
| Cooling Method | Water |
| Number of Fans | 2 |
| Mfr Part Number | CA-1Y2-00MEWN-00 |
| Number of Items | 1 |
| Total Usb Ports | 2 |
| Antenna Location | Business, Gaming |
| Compatible Devices | Compatible with most ATX, Micro ATX, and E-ATX motherboards and various liquid cooling systems, peripherals, and PC components |
| Enclosure Material | SPCC, Tempered Glass |
| Total USB 3.0 Ports | 2 |
| Warranty Description | 3 Year Manufacturer |
| Hard Disk Form Factor | 3.5 inches |
| Supported Motherboard | Mini ITX, Micro ATX, ATX, E-ATX |
| Full listing title | Thermaltake Ceres 300 Matcha Green Mid Tower E-ATX Computer Case with Tempered Glass Side Panel; 2xCT140 ARGB Fan Preinstalled; Rotational PCIe Slots; CA-1Y2-00MEWN-00; 3 Years Warranty |
Ready to buy?
Thermaltake Ceres 300 Matcha Green Mid Tower E-ATX Computer Case with Tempered Glass Side Panel; 2xCT140 ARGB Fan Preinstalled; Rotational PCIe Slots; CA-1Y2-00MEWN-00; 3 Years Warranty is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best PC Gaming Controller in 2026: GameSir G7 SE vs DualSense vs 8BitDo Pro 2
- Intel IPEX-LLM vs Ollama on AMD: AI Rig Guide 2025
- Framework Desktop & Ryzen AI Max+ 395 Review: Best Strix Halo Mini PCs in 2026
- Best Raspberry Pi Alternatives for AI in 2026
- Best Budget SATA SSD for a Steam Game Library in 2026
- Best Budget GPU for Local LLM Inference in 2026
- Minimal Raspberry Pi 5 Case: Friction-Fit 3D Printing Guide
- Shared ChatGPT & Claude Chats Are Spreading Malware — Run a Local LLM on a 12GB GPU Instead
- vLLM vs llama.cpp on an RTX 3060 12GB for Local Chat
- Qwen-Image-3.0 on an RTX 3060 12GB: Local Text-in-Image Gen
- Save $550 on iBuyPower RTX 5070 + 7800X3D 4K Gaming PC
- Open-WebUI on a Raspberry Pi 4: A Front-End for Your RTX 3060 LLM Rig
- Best PC Gaming Controllers in 2026: 5 Top Picks
- Best Raspberry Pi Alternative in 2025: Full Buying Guide
- Aider vs Cline vs Continue.dev for Local-LLM Coding on a 12GB GPU
- How to run Qwen 3 32B on Apple M4 Pro
- Build a RetroPie Console on a Raspberry Pi 4 8GB in 2026: A Complete Walkthrough
- Best Internal SSDs Under $100 in 2026
- Sound Blaster G6 on a Modern Retro Build: When a USB DAC Beats an AWE32
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Which 27-Inch Wins?
- AMD Ryzen AI Halo Ships with a Fully Open-Source Linux Stack
- Best Streaming Gear for New Creators in 2026
- Intel Bartlett Lake vs i9-13900K: More Cores, Fewer Frames
- Local AI Image Generation: Best AMD GPUs for 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090