Cermant
Cermant 10pcs Servo Y Splitter Cable
Bottom line: The Cermant 10pcs Servo Y Splitter Cable is a specs-and-price decision rather than a crowd-consensus one in the accessories category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Includes 10 pieces of cables.
- ✓ Backed by Cermant's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
100% brand new with high qualityServo receiver Y extension cordFeatures:This cable can work with RC Cars, Planes, Helicopters, & Drones. Splitter Servo Leads can be used to control 2 servos at the same time or supply power to different devices. It is made of tinned copper, PVC material, good transmission, low resistance, good insulation. High quality soldering points.Specification:●Connector: compatible with Futaba / JR / Spektrum / Hitec●Wire Gauge: 1 to 2 splitter cables: 24AWG;●Length: 1 to 2 splitter cables: 7cm (2.8inch);●Package included:10 pieces of cables
SpecPicks Verdict
SpecPicks scored Cermant 10pcs Servo Y Splitter Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Cermant's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Includes 10 pieces of cables.
- Made of tinned copper, PVC material, good transmission, low resistance, good insulation. High quality soldering points.
- Cable: 26awg 30cores, Line Length: 2inch/50mm，Total length:2.76inch/70mm
- Servo Plug Type: Futaba compatible with JR / Spektrum / Hitec
- Work with RC Cars, Planes, Helicopters, & Drones servo or receiver connection. It can be used to control 2 servos at the same time.
Full Specifications
| Brand | Cermant |
|---|---|
| Cable | 26awg 30cores, Line Length: 2inch/50mm，Total length:2.76inch/70mm |
| Model | Celent_CL408 |
| Material | Polyvinyl Chloride (PVC) |
| Cable Type | Futaba |
| Unit Count | 10 Count |
| Part Number | Celent_CL408 |
| Material Type | Polyvinyl Chloride (PVC) |
| Wire Diameter | 0.51 millimeters |
| Connector Type | Futaba/Jr/Spektrum/Hitec |
| Servo Plug Type | Futaba compatible with JR / Spektrum / Hitec |
| Included Components | Breakout Board |
| Full listing title | 10pcs Servo Y Splitter Cable, JR Futaba 1 Male to 2 Female | RC Harness，RC extension wire for car, airplane, helicopter, drone and boat model servo wiring |
Ready to buy?
10pcs Servo Y Splitter Cable, JR Futaba 1 Male to 2 Female | RC Harness，RC extension wire for car, airplane, helicopter, drone and boat model servo wiring is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Ollama vs vLLM for Single-User Local Chat on an RTX 3060 12GB (2026)
- Best Streaming Setup for PC Gamers in 2026: 5 Picks Under $500
- Best Parts for a Budget Ryzen + RTX 3060 Gaming PC Build in 2026
- Network-Wide Ad Blocking with Pi-hole on a Raspberry Pi 4 8GB (2026 Setup)
- Intel i7-9700K vs Ryzen 7 5700X for a Budget 2026 Gaming Build
- Intel Panther Lake on Linux: First Core Ultra X7 Numbers Land
- Prime Intellect's $130M raise: build your own agent rig
- 32B Models on 12GB VRAM: What an RTX 3060 Can Really Run in 2026
- Ah Yes, 'Gaming' Laptops: The Hype vs. Reality
- AMD Ryzen 7 7700X3D Review: 7800X3D's OEM-Only Rival
- Local LLM as a Quake 3 / UT99 Demo Coach: Ollama on Ryzen 7 5800X + RTX 3060 (2026)
- Ryzen 7 5700X vs 5800X for a 2026 Gaming Build: Which AM4 Chip Wins?
- Best GPU for LLM Training and Inference in 2026
- Steam Deck Sleep Mode: Should You Leave It Plugged In?
- Simba 3.2 Tops the TTS Leaderboard: Run Local Text-to-Speech on an RTX 3060 12GB
- GeForce FX 5900 Won't POST or Crashes in WinXP: Troubleshooting Guide
- How to Run a SATA SSD on a Windows XP Retro Gaming PC (AHCI + Adapters)
- Raspberry Pi Pico W Becomes a Driverless USB WiFi Adapter
- RetroArch PS2 Emulation: Setup, BIOS & Performance Guide
- Building a DualSense PC Adapter with a Raspberry Pi for $20 (2026)
- Best GPU for Local LLMs Under $400 in 2026: Why 12GB Still Wins
- Best CPU Cooler for Ryzen 7 5800X Overclocking (2026)
- Anthropic's 2GW AMD Deal: Should You Still Run Local?
- Gemini Intelligence Hardware Requirements Explained
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090