Thermalright
Thermalright AXP90-X53 Full Cooper Low Profile CPU Cooler ITX
Bottom line: The Thermalright AXP90-X53 Full Cooper Low Profile CPU Cooler ITX: 53mm total height clears most ITX and HTPC cases; main trade-off: 22.4 dB(A) fan hits 2700 RPM under load, audible in quiet builds.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 53mm total height clears most ITX and HTPC cases
- ✓ Pure copper fins and micro-carved copper base, not aluminum
- ✓ 4x 6mm AGHP heat pipes work in any mounting orientation
- ✓ 94.5x95mm footprint leaves all RAM slots unobstructed
- ✓ Fits LGA1700/1200/115x and AM4/AM5 with included brackets
Cons
- ✗ 22.4 dB(A) fan hits 2700 RPM under load, audible in quiet builds
- ✗ 92mm slim fan pushes only 42.58 CFM, limits high-TDP CPUs
- ✗ Backplate may conflict with rear motherboard components
- ✗ Reverse-mount workaround needed on some AM4/AM5 boards
SpecPicks Verdict
SpecPicks scored Thermalright AXP90-X53 Full Cooper Low Profile CPU Cooler ITX using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. Thermalright's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【Optimized Details】The main cpu cooler body of heat dissipation adopts Seiko micro-carved copper bottom + pure copper anti-oxidation process + fine fins, which reduces wind damage and can effectively increase the effect of heat dissipation in the case of stability.
- 【AGHP technique】The 4x6mm heat pipe adopts the 4th generation technology of AGHP upgrade, Solve the Inverse gravity effect caused by vertical/horizontal orientation,with 2 soldered heat pipe fins, the heat transfer efficiency of the cooler heatsink is doubled, and the overall height is 53mm, which can be compatible with more small motherboards.
- 【53mm Height】The AXP90 X53 Full low profile cooler, combined with a 92mm PWM fan for automatic temperature control and ultra-quiet operation, and a total cooler height of just 53mm, makes it ideal for HTPC, ITX and small models with a small CPU cooler without any memory limitation worries.
- 【cpu cooler specifications】cpu cooling Size: 94.5×95×53mm, matched fan: TL-9015R, air volume: 42.58CFM (MAX), air pressure: 1.33mmH2O (MAX), speed: 2700RPM±10%, noise: 22.4db (A), fan pin: 4PIN PWM, radiator material: Pure copper. The attached heat transfer paste can provide good cooling effect and improve the heat transfer of the CPU.The radiator is made of pure copper, which greatly increases the oxidation resistance of the cooler.
- 【Broad Compatibility】The heatsink supports CPU slots: Intel: LGA1700/1150/1151/1155/1156/1200; AMD/AM4/AM5, for different platforms, the pc cooler is equipped with the corresponding metal mounting fasteners, which can be installed in conjunction with the manual or installation video.
- 【Installation Details】If the AXP90-X backplane conflicts with the components on the back of the motherboard, you need to use the long screws that come with the AXP90-X and install the backplane in reverse. If you encounter a non-removable bottom metal backplate when installing the AM4/AM5, you can remove the front plastic bracket and screws, and use the attached long screws to install through the metal backplate. If you have any questions, please contact the store's customer service.
Full Specifications
| Brand | Thermalright |
|---|---|
| Model | AXP X53 FULL |
| Voltage | 12 volts |
| Wattage | 145 watts |
| Material | Metal Plastic Copper |
| Unit Count | 1 Count |
| Noise Level | 22.4 sones |
| Part Number | AXP X53 FULL |
| Compatibility | PC |
| Material Type | Metal Plastic Copper |
| Cooling Method | Air |
| Number of Items | 1 |
| Number of Packs | 1 |
| Air Flow Capacity | 42.58 cfm |
| Compatible Devices | Desktop |
| Included Components | CPU COLLER |
| Power Connector Type | 4-Pin |
| Maximum Rotational Speed | 2700 rpm |
| Item Dimensions L x W x H | 3.72"L x 2.09"W x 3.74"H |
| Full listing title | Thermalright AXP90-X53 Full Cooper Low Profile CPU Cooler ITX,with 92mm TL-9015R Slim PWM Fan ITX CPU Cooler,AGHP Technology,53mm Height,for AMD AM4 AM5/Intel 1700/1150/1151/1200/1851(AXP90 X53 Full) |
Ready to buy?
Thermalright AXP90-X53 Full Cooper Low Profile CPU Cooler ITX,with 92mm TL-9015R Slim PWM Fan ITX CPU Cooler,AGHP Technology,53mm Height,for AMD AM4 AM5/Intel 1700/1150/1151/1200/1851(AXP90 X53 Full) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- How to run Qwen 3 32B on AMD Radeon RX 7900 XTX
- Best Buy Cuts $900 Off an Asus 64GB Gaming Laptop — Is a Desktop Smarter?
- Best CPU for Streaming and Gaming on a Single PC in 2026
- SNES Classic vs Sega Genesis Mini vs Raspberry Pi RetroPie: Best Plug-and-Play Retro Gaming in 2026
- vLLM 0.21 Adds Intel Arc Support: The Local Stack Widens
- Building a 2001 LAN-Party Rig: Pentium III, GeForce 3, Win98 SE Period-Correct Build Log
- Best Cooling for AMD Ryzen Overclocking in 2026
- Imaging and Restoring Vintage IDE Drives in 2026: SATA/IDE-to-USB Adapters Compared
- 8BitDo Pro 2 vs DualSense for PC Emulation: Which Controller Wins
- GeForce FX 5900 Ultra Period-Correct WinXP Build Guide: Driver Hunt, Half-Life 2 Mixed-Mode, and Doom 3…
- Build a 2001 GeForce3 + Win98 SE Gaming Rig in 2026: Parts and Gotchas
- Period-Correct Pentium III + GeForce 4 Ti Build for 2001-2003 Gaming
- Best Budget Upgrades to Revive an Old Gaming PC in 2026
- Best SSD for Steam Deck and Handheld Gaming Storage Expansion 2026
- Raspberry Pi 4 8GB in 2026: Still the Right Pick for Retro Emulation and Home Servers?
- Qwen 3.6 35B-A3B vs Qwen 3.6 27B Dense: Which Local LLM Wins on a Single 24GB GPU?
- Intel Arc Pro B60 AI Performance: 24GB VRAM Explained
- Best Controller for Emulation and Fighting Games in 2026
- RTX 4090 AI Server vs AMD Instinct: 2025 Guide
- Intel Arc AI Inference: 2025 Performance & Setup Guide
- Raspberry Pi AI HAT+ 2 Review: 4 TOPS Edge AI on 1.2W
- Best GPU for Local LLMs Under $350: Why the RTX 3060 12GB Still Wins
- TCL 27R944K Review: 165Hz Mini LED Gaming Monitor
- Acti Brings AI Agents Into Your Smartphone Keyboard
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090