ErGear Dual Monitor Stand up to 32 inches Screen
Status: ErGear Dual Monitor Stand up to 32 inches Screen: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The ErGear Dual Monitor Stand up to 32 inches Screen: Holds two screens up to 32 inches and 22 lbs per arm on VESA 75x75 or 100x100; main trade-off: rules out monitors under 17 inches, under 4.4 lbs, or without VESA holes.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:
Similar: ErGear Dual Monitor Stand up to 33 inches Screen — $28.49 on Amazon as of 2026-10-06 22:15 UTC (price may vary).
Similar: UPGRAVITY 3 Monitor Desk Mount for 17 to 32 inch… — $35.19 on Amazon as of 2026-10-06 22:25 UTC (price may vary).
Similar: MOUNT PRO Triple Monitor Mount for Max 32"… — $72.67 on Amazon as of 2026-10-07 04:14 UTC (price may vary).
Pros & Cons
Pros
- ✓ Holds two screens up to 32 inches and 22 lbs per arm on VESA 75x75 or 100x100
- ✓ Arms extend 17.32 inches forward and lift screens 12.12 inches above the desk
- ✓ Full 360-degree rotation switches either monitor between landscape and portrait
- ✓ Swivels 90 degrees left and right, tilts +90 to -35 degrees for eye-level angles
- ✓ Ships with both C-clamp (0.39-2.56 in) and grommet (0.39-2.17 in) mounting options
Cons
- ✗ Rules out monitors under 17 inches, under 4.4 lbs, or without VESA holes
- ✗ ErGear recommends wooden desks only, so glass and metal tops are out
- ✗ Desk beams or under-panels can block both the clamp and grommet mounts
- ✗ Grommet mount caps at 2.17 inch desk thickness, thinner than the C-clamp limit
SpecPicks Verdict
SpecPicks scored ErGear Dual Monitor Stand up to 32 inches Screen using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. ErGear's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Computer Compatibility - To ensure compatibility of the dual monitor stand, each of your monitors must meet three conditions: Firstly, computer screen size range: 17 to 32 inches. Secondly, screen weight range: 4.4 to 22lbs. Thirdly, there must be VESA mounting holes on the back of the monitor screen that are spaced 75x75 mm or 100x100 mm apart. Please make sure that your monitor meets all of the above conditions before purchasing.
- Maximum Flexibility - The monitor stand features +/-90° left and right swivel for multi-screen co-driving, +90° to -35° up and down tilt for your office comfort, and 360° swivel for landscape and portrait modes.
- Height & Extension Adjustment - The dual monitor arm for 2 monitors can be positioned as high as 12.12″ above the desk surface, allowing you to raise your screens closer to eye level for more comfort. The flexible arms can extend the screens 17.32″ closer to you for a more immersive viewing experience.
- Easy to install - The structured monitor stand is very easy to install, you can choose C-clamp or grommet hole as needed. For the sake of using experience, please check if your table meets the following three conditions: Material first, we only recommend wooden table. Table form secondly, The bottom of the table should preferably be free of any beams or panels that may interfere with installation. Table thickness thirdly,'C' clamp fits 0.39"-2.56" while grommet mount fits 0.39"-2.17".
- Advanced Technology -Tested for 20,000 cycles, our dual monitor arm holds the screen securely in place while allowing for smooth, easy adjustments. Additionally, the long service life of it will enhance your experience.
Full Specifications
| Brand | ErGear |
|---|---|
| Color | White |
| Material | Aluminum |
| Model Number | EGDS15W-US |
| Mounting Type | Tabletop Mount |
| Movement Type | Tilt, Swivel, Rotation, Height Adjustment |
| Number of Items | 2 |
| Compatible Devices | Monitor |
| Enclosure Material | Aluminum |
| Maximum Tilt Angle | 90 degrees |
| Warranty Description | 2 |
| Minimum-Supported Screen Size | 17 inches |
| Full listing title | ErGear Dual Monitor Stand up to 32 inches Screen, Load-Bearing Max 22 lbs Each Arm, Adjustable Dual Monitor Mount, Sturdy Steel vesa Monitor Mount with Stable VESA 75x75 100x100mm-White |
Ready to buy?
Amazon shows no buyable offer for ErGear Dual Monitor Stand up to 32 inches Screen at the last check. A similar in-stock product is ErGear Dual Monitor Stand up to 33 inches Screen. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- AI Bug-Hunting Exploded: Run a Local Vuln-Scanner LLM on 12GB VRAM
- Inkling's 975B Open-Weight Speech Model — and the 12GB Rig That Transcribes Free
- RTX 5090 vs RTX 4080: Specs, Gaming & AI Compared
- Claude Opus 4.8 vs Local LLM on RTX 3060 12GB: Honest 2026 Benchmarks
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Throughput in 2026
- Grok 4.5 Ranks #4 on GDPval: Cloud-vs-Local Math for 2026
- Cerebras Says It's Running GPT-5.5 Internally — What It Means for Local LLM Boxes
- Imaging Vintage Hard Drives in 2026: SATA/IDE-to-USB Adapters Compared (FIDECO vs Unitek vs Vantec)
- Arc A770 16GB vs RTX 3060 12GB for Local Llama 3
- Data Center CPU Demand Surge: AI Agents and the GPU Ratio Shift
- Why NVIDIA's New AI Servers Use Hot-Tub Coolant
- Building a 1998 Voodoo2 SLI Glide Rig in 2026: CompactFlash Boot and Quake II
- Best Budget 1TB SATA SSD 2026: BX500 vs WD Blue vs SanDisk Ultra 3D vs Samsung 870 EVO
- Fish Audio S2.1 Pro Is Free Until July 24 — But Can You Run TTS Locally on an RTX 3060?
- Best CPU Cooler for the Ryzen 7 5800X: Air vs 120mm vs 240mm AIO
- Best Gaming Mouse for FPS Esports in 2026 (Tournament-Tested Picks)
- Building a Local LLM Voice Assistant on Raspberry Pi 4 8GB: Whisper + Llama 3.2 1B Setup (2026)
- Best GPU for Qwen 3 32B (2026)
- Asus RTX 5060 Near-MSRP Deal Has Expired
- Best Plug-and-Play Retro Console and Handheld to Buy in 2026: 5 Ranked Picks
- Ollama vs llama.cpp on a 12GB GPU: Which Is Faster for Single-User Chat?
- Audigy 2 ZS Won't Detect in Win98 SE: A Troubleshooting Decision Tree
- RTX 3060 vs Arc B580 for 1440p Gaming: Which 12GB Card Wins?
- GeForce 4 Ti 4600 + Pentium 4 Northwood: Period-Correct 2002 Build Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090