Geekworm
Geekworm P573 Aluminum Case for Raspberry Pi 5
Bottom line: The Geekworm P573 Aluminum Case for Raspberry Pi 5 ($9.99 on Amazon as of 2026-10-07): Fully fanless aluminum armor cools the Pi 5 with no fan noise; main trade-off: no fan, so sustained heavy loads rely only on passive dissipation.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Fully fanless aluminum armor cools the Pi 5 with no fan noise
- ✓ Copper CPU heatsink plus cooling column draw heat away from the SoC
- ✓ Fits every Pi 5 RAM tier: 2GB, 4GB, 8GB and 16GB boards
- ✓ Cutouts keep USB-C, Micro HDMI, microSD and GPIO reachable
- ✓ Includes a plastic power button for on/off without opening the case
Cons
- ✗ No fan, so sustained heavy loads rely only on passive dissipation
- ✗ Listed for Raspberry Pi 5 only; earlier Pi models are not supported
- ✗ Full metal shell may reduce onboard Wi-Fi and Bluetooth range
- ✗ Power button is plastic, unlike the aluminum body
Manufacturer description
About this item Compatibility: Raspberry Pi 5 fanless passive cooling aluminum alloy armor case compatible with Raspberry Pi 5 16GB/8GB/4GB/2GB computer; Model: P573; Color: Black Easy access to all Ports of Pi 5: All ports are easily accessible, easy access to power button, Micro SD card, USB-C, Micro HDMI, GPIO cable With Power Button: Comes with plastic power button, easy to press to power on or power off High quality Aluminum Material: Reinforced aluminum material, heavy-duty, long-lasting User Guide: 1. Refer to the paper card user manual 2. Remove the protect films on the thermal pads…
SpecPicks Verdict
SpecPicks scored Geekworm P573 Aluminum Case for Raspberry Pi 5 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. Geekworm's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Compatibility Raspberry Pi 5 fanless passive cooling aluminum alloy armor case compatible with Raspberry Pi 5 16GB/8GB/4GB/2GB computer; Model P573; Color Black
- Easy access to all Ports of Pi 5 All ports are easily accessible, easy access to power button, Micro SD card, USB-C, Micro HDMI, GPIO cable
- With Power Button Comes with plastic power button, easy to press to power on or power off
- High quality Aluminum Material Reinforced aluminum material, heavy-duty, long-lasting
- User Guide 1. Refer to the paper card user manual 2. Remove the protect films on the thermal pads before use
Full Specifications
| ASIN | B0CNRGN4B7 |
|---|---|
| Brand | Geekworm |
| Color | P573-Black |
| Material | Aluminum |
| Case Type | Raspberry Pi |
| Model Name | P573 |
| Item Weight | 180 Grams |
| Manufacturer | Geekworm |
| Model Number | P573 |
| Cooling Method | Air |
| Antenna Location | In door use only |
| Compatible Devices | Raspberry Pi 5 2GB/4GB/8GB/16GB |
| Enclosure Material | Aluminum |
| Product Dimensions | 3.6"D x 2.52"W x 1.28"H |
| Total USB 2.0 Ports | 2 |
| Warranty Description | 3 months |
| Hard Disk Form Factor | 3.5 Inches |
| Supported Motherboard | Mini ITX |
| Item Dimensions D x W x H | 3.6"D x 2.52"W x 1.28"H |
| Motherboard Compatability | Mini ITX |
| Full listing title | Geekworm P573 Aluminum Case for Raspberry Pi 5, Fanless Heavy-Duty Passive Cooling Armor Enclosure with Cooling Column & Copper CPU Heatsink Compatible with Raspberry Pi 5 2/4/8/16GB |
Ready to buy?
Geekworm P573 Aluminum Case for Raspberry Pi 5, Fanless Heavy-Duty Passive Cooling Armor Enclosure with Cooling Column & Copper CPU Heatsink Compatible with Raspberry Pi 5 2/4/8/16GB is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Single-Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best AIO Liquid CPU Coolers for High-TDP Builds in 2026
- Best PC Game Controllers for 2026: 5 Picks Ranked
- Sound Blaster Audigy 2 ZS vs Aureal Vortex 2: The Last Great Win98 Audio Battle
- Cursor Launches Its Own AI Model and Git Platform: What Changes
- Raspberry Pi 4 8GB vs a Used Mini PC for a 2026 Beginner Homelab
- Best Budget Gaming Keyboard Under $50 in 2026
- Optimizing LTX-2.3 Inference Speed on an RTX 3080 Ti
- Build a Home AI Assistant on a Raspberry Pi 4 8GB in 2026
- Why Cheap Monitors Use HDMI Instead of DisplayPort
- Ryzen 9 9950X3D2 vs Ryzen 7 5800X: Is the Upgrade Worth It?
- Best Budget GPU for CNN and Image-Model Training in 2026: The RTX 3060 12GB Deep Dive
- Backing Up Vintage IDE Drives to CompactFlash in 2026
- ComfyUI on a 12GB GPU: SDXL and Flux Setup, VRAM Limits, and Real Throughput
- Add Wireless Controllers and More Games to Your SNES Classic & Genesis Mini in 2026
- Best Budget CPU for Gaming + Productivity in 2026: The Honest Buying Guide
- Codex Now Drives Windows PCs: The Local-Agent Rig You Can Build Instead
- Aider vs Cline vs Cursor for Local Coding on a 12GB GPU (2026)
- Best Budget GPU for Local LLM Inference Under $400 (2026)
- Best CPU Cooler for High-TDP Builds (2026)
- Best CPU Cooler for Gaming PCs in 2026: Air & AIO Picks
- A 4B Local Coding Agent That Hits 87%: Does It Run on a 3060?
- Raspberry Pi Locator Shuts Down in July: Where to Buy a Pi Now
- Raspberry Pi Projects for Teens: Best Builds 2026
- Best Budget Gaming SSDs Under $100 in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090