Skip to main content
ELUTENG M.2 SATA NGFF to SATA Adapter (Not Support NVME/ M.2 PCIE) 6Gbps Dual NGFF MSATA B Key/ B&M Key SSD to 2.5" III Converter Adapter Max 4TB Support 2230 2242 2260 2280 SSDs
ELUTENG

ELUTENG M.2 SATA NGFF to SATA Adapter (Not Support NVME/ M.2 PCIE) 6Gbps Dual NGFF MSATA B Key/ B&M Key SSD to 2.5" III Converter Adapter Max 4TB Support 2230 2242 2260 2280 SSDs

Bottom line: The ELUTENG M.2 SATA NGFF to SATA Adapter ($8.99 on Amazon as of 2026-11-21 02:13 UTC): Converts M.2 NGFF B-key and B+M-key SATA SSDs to a standard 2.5-inch SATA III drive; main trade-off: no NVMe or M.2 PCIe support at all, SATA-protocol NGFF drives only.

$8.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Converts M.2 NGFF B-key and B+M-key SATA SSDs to a standard 2.5-inch SATA III drive
  • ✓ Accepts all four common M.2 lengths: 2230, 2242, 2260 and 2280
  • ✓ SATA 3.0 interface rated up to 6Gbps theoretical throughput
  • ✓ Dual-slot board holds two NGFF SSDs for up to 4TB combined capacity
  • ✓ Driver-free plug-and-play on Windows 7/8/10/11, macOS and Linux

Cons

  • ✗ No NVMe or M.2 PCIe support at all, SATA-protocol NGFF drives only
  • ✗ Both slots must be populated, so a single SSD will not work
  • ✗ Drives are re-initialized on first use, wiping any existing data
  • ✗ Two drives are merged as JBOD, with no RAID or independent volumes

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for ELUTENG M.2 SATA NGFF to SATA Adapter (Not Support NVME/ M.2 PCIE)…, so this read rests on the manufacturer's listed specs and the current price in the storage adapters category (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. On the listing's own facts, the case for it is "Converts M.2 NGFF B-key and B+M-key SATA SSDs to a standard 2.5-inch SATA III drive"; the main trade-off is "No NVMe or M.2 PCIe support at all, SATA-protocol NGFF drives only". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【NGFF to SATA3.0】 M.2 NGFF SSD to SATA conversion adapter for 2230/ 2242/ 2260/ 2280mm size M.2 hard disks, B key and B+M key are supported. Note: Only M.2/NGFF is supported. *Note: Only M.2/NGFF is supported.
  • 【Faster Transmission Performance】 M.2 NGFF case is a SATA3.0 external transfer interface that provides a theoretical maximum transfer rate of 6Gbps. Note: Transfer speeds are affected by device configuration and SSD performance and may deviate from theoretical data. Please be aware that there may be deviations from theoretical data.
  • 【Application】 You can use it directly with an external hard drive cage using an easy-drive cable or install it in the hard drive bay of a host computer or laptop.
  • 【Easy Installation】 Faster plug-and-play, no additional drivers required, and lightweight for easy portability.
  • 【Precautions】 Only M.2 NGFF SATA SSDs are supported, NVME and PCI-E SSDs are not supported, two SSDs must be connected for simultaneous use, SSDs will be re-initialized upon first use, please back up your hard drive data before use, when using, two When in use, a JBOD is formed between the two hard disks.
  • 【4TB large Capacity】This M.2 NGFF SSD to SATA conversion adapter up to 4TB SSD can be installed. backward compatible with 2TB/1TB/512GB/256GB/128GB, read speed: 500MB/s (This data is for reference only). Compatible with Windows 7/8/10/11/Mac OS / Linux systems.

Full Specifications

BrandELUTENG
ColorBlack
Model NumberM.2 SATA (NGFF) to SATA
CompatibilityMac, Linux
Built-In MediaNon
Mfr Part NumberELT_NGFF_NGFF_SATA_BK
Number of Items1
Hardware PlatformLaptop
Compatible DevicesLaptop
Data Transfer Rate6 gigabits_per_second
Enclosure MaterialMetal
Hardware InterfaceSATA 3.0 Gb/s
Warranty Description12 months
Hard Disk Form Factor2.5 inches
Connectivity TechnologySATA
Memory Storage Capacity4 TB
Item Dimensions L x W x H6.93"L x 4.21"W x 0.35"H
Supported Devices Quantity1

Ready to buy?

ELUTENG M.2 SATA NGFF to SATA Adapter (Not Support NVME/ M.2 PCIE) 6Gbps Dual NGFF MSATA B Key/ B&M Key SSD to 2.5" III Converter Adapter Max 4TB Support 2230 2242 2260 2280 SSDs is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $8.99

*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →