SUNMON
SUNMON White Boom Arm for Fifine AM8
Bottom line: The SUNMON White Boom Arm for Fifine AM8: Pre-installed 3/8" to 5/8" adapter fits the Fifine AM8 out of the box; main trade-off: microphone not included; the arm ships bare.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Pre-installed 3/8" to 5/8" adapter fits the Fifine AM8 out of the box
- ✓ Dual suspension springs on each arm section resist mic droop and sway
- ✓ Reinforced knobs hold position after you set angle and height
- ✓ Desk clamp grips surfaces up to 1.89 in (4.8 cm) thick
Cons
- ✗ Microphone not included; the arm ships bare
- ✗ Clamp only, so no through-desk grommet mount option
- ✗ Desks thicker than 1.89 in (4.8 cm) are incompatible
- ✗ Reach and weight capacity are not published by SUNMON
SpecPicks Verdict
SpecPicks scored SUNMON White Boom Arm for Fifine AM8 using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. SUNMON's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【Boom Arm】- Suspension boom arm stand fit your Fifine AM8 suitable, you can adjust the mic to the suitable angle or height to show your voice.Before installing your FIfine microphone to the microphone arm, you can loosen the knob and adjust it to the angle you want to tighten after installing your gaming mic.
- 【Stability】- Mic boom arm is dual suspension springs on each boom arm, the knobs are reinforced to keep the mic arm where you want it to be,protects the Fifine AM8 S microphone from shaking, sinking and making noise.
- 【Mic stand】- Before you receive this mic stand for Fifine AM8, we pre-install the silver adapter for Fifine AM8 boom arm. Mic arm adapter can be converted from 3/8"to 5/8"for adapting Fifine AM8.
- 【Table Clamp Base】- Suspension boom arm comes with one desk clamp, can clip to any desktop up to 1.89"/4.8cm thick. The sponge on the mic stand desk base could protect your desk without any scratches when you swivel side screw.
- 【Package】- Included: 1x Fifine AM8 Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount，Pre-installation completed). Note: Not Included Streaming Mic.
Full Specifications
| Brand | SUNMON |
|---|---|
| Color | Mic Arm for Fifine AM8-White |
| Material | Alloy Steel |
| Base Type | Clamp |
| Model Number | White Fifine AM8 Boom Arm |
| Material Type | Alloy Steel |
| Product Style | Modern |
| Item Type Name | Mic Boom Arm |
| Maximum Height | 68.1 centimeters |
| Item Dimensions | 15.75 x 4.72 x 1.97 inches |
| Number of Items | 1 |
| Body Material Type | Alloy Steel |
| Included Components | 1x Boom Arm for Fifine AM8, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount). |
| Warranty Description | 90 |
| Manufacturer Part Number | MPN_SM_M_Stand35W_FFAM8_01 |
| Item dimensions L x W x H | 15.75 x 4.72 x 1.97 inches |
| Microphone Stand Thread Size | 3/8 inch, 5/8 Inch |
| Maximum Weight Recommendation | 1.4 kg |
| Full listing title | SUNMON White Boom Arm for Fifine AM8 - Mic Boom Arm Compatible with Fifine Microphone, Mic Boom Arm with 3/8" to 5/8" Screw Adapter Clip, Microphone Boom Arm with Desk Clamp |
Ready to buy?
SUNMON White Boom Arm for Fifine AM8 - Mic Boom Arm Compatible with Fifine Microphone, Mic Boom Arm with 3/8" to 5/8" Screw Adapter Clip, Microphone Boom Arm with Desk Clamp is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best SATA SSDs for Console and Retro PC Upgrades in 2026
- Best Sim Racing Gear for PC in 2026: 5 Picks Tested by Spec
- Logitech Slashes Gaming Mouse Prices up to 47% for Prime Day
- Best Gaming Room Lighting in 2026: LED Strips and Ring Lights
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 4090
- Running DeepSeek Distills Locally on a Ryzen 7 5800X + RTX 3060
- Asus ROG Harpe II Extreme Brings a 65K-DPI Sensor — and a Gold Price Tag
- Best Budget AM4 Gaming Build Parts in 2026
- Wooden CPU Cooler: How to Build One and What to Expect
- Mistral 7B vs Mistral Small 24B: GPU Requirements Compared
- RetroPie Handheld Shells in 2026: Pick the Right Pi for Your DIY Handheld
- Best Travel Gaming Kit in 2026: 5 Picks for Hotels and Flights
- PS5 DualSense vs 8BitDo Pro 2 on Raspberry Pi 4 RetroPie: Which Controller Wins in 2026?
- 2000s LAN Party Modern Setup Guide: Hardware, Cables, and Server Stack in 2026
- Best Sim Racing Wheel and Shifter Combo for Beginners: Logitech G920 + Thrustmaster TH8A
- Best SATA SSD for a Retro Windows 98 Build: BX500 vs 870 EVO
- HyperX QuadCast 2 vs Blue Yeti for Streaming & Podcasting (2026)
- Raspberry Pi 5 Specs: Full 2025 Breakdown
- Gemma 4 and Larger Qwen 3.6: What Hardware You'll Actually Need
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Throughput in 2026
- NVMe vs SATA for a Steam Library: 970 EVO Plus vs BX500
- Best 1TB SATA SSDs for PC Builds and Retro Upgrades in 2026
- AMD Ryzen 9 9950X Hitting 98°C While Streaming?
- Hailo-10H AI Accelerator on Raspberry Pi 5: Real Tok/s for On-Device LLMs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090