HZLucki Controller Grips Cover Compatible with Meta Quest 3S/Quest 3
Status: HZLucki Controller Grips Cover Compatible with…: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The HZLucki Controller Grips Cover Compatible with Meta Quest 3S/Quest 3: Cutouts keep Quest 3/3S infrared tracking LEDs fully exposed; main trade-off: quest 3 and 3S controllers only, no Quest 2 or Pro fit.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:
Similar: Battery Head Strap for Meta Quest 3/3S… — $34.39 on Amazon as of 2026-11-22 17:15 UTC (price may vary).
Similar: Gun Stock for Meta Quest 3 — $28.59 on Amazon as of 2026-11-22 17:15 UTC (price may vary).
Similar: 7-in-1 Protective Silicone Cover Set for Meta… — $19.99 on Amazon as of 2026-11-22 17:15 UTC (price may vary).
Pros & Cons
Pros
- ✓ Cutouts keep Quest 3/3S infrared tracking LEDs fully exposed
- ✓ Adjustable knuckle straps fit most hand sizes
- ✓ Marked L/R shells install without tools per the manual
- ✓ Slide-down battery hatch mirrors the stock door design
Cons
- ✗ Quest 3 and 3S controllers only, no Quest 2 or Pro fit
- ✗ Adds bulk that can tighten fit in some carrying cases
- ✗ Strap curvature needs manual tuning for small hands
- ✗ HZLucki lists no warranty terms in the product details
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for HZLucki Controller Grips Cover Compatible with Meta Quest 3S/Quest 3, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the vr headsets & accessories category before committing. On the listing's own facts, the case for it is "Cutouts keep Quest 3/3S infrared tracking LEDs fully exposed"; the main trade-off is "Quest 3 and 3S controllers only, no Quest 2 or Pro fit". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 100% Signal: HZLucki controller grips will not block any infrared tracking leds of your Quest 3S/Quest 3. Steady signal will greatly enhance your VR gaming experience.(Fit for Official Charging Dock Battery)
- No Broken Problem : Safety designed of knuckle straps. No worry about the BROKEN problem, no risky for your controller safety. The knuckle straps can hold your controllers tightly to the palm of your hands, preventing it from throwing by accident while you are playing games.
- Perfect Fit Various Hand Sizes: HZLucki controller grip cover is perfectly compatible with the Quest 3S/Quest 3 controller. The adjustable hand strap can perfectly fit most hands. No matter what size your hand is, you can adjust it as you like. And it is able to flexibly adjust the curvature of the knuckle strap cover to the controller, enhance your gaming comfort.
- Easy to Install: The hand cover has the L and R logo(Left and Right), just distinguish it that you can easily to install and replace. Meanwhile you can easily operate the installation according to the user manual. Everyone can do it alone.
- One-step Battery Replacement: The controller cover has the same design as the original one. Just press and hold the button, and slide down to open the replacement part, only one step to replace battery.
Full Specifications
| Brand | HZLucki |
|---|---|
| Color | Light Gray |
| Model Number | HQP04-1 |
| Power Source | Battery Powered |
| Button Quantity | 12 |
| Controller Type | Gamepad |
| Item Dimensions | 3.74 x 1.97 x 0.55 inches |
| Hardware Platform | Compatible with Meta Quest 3 |
| Compatible Devices | Meta Quest 3S, 3 |
| Manufacturer Part Number | HQP04-1 |
| Full listing title | HZLucki Controller Grips Cover Compatible with Meta Quest 3S/Quest 3 | Adjustable Knuckle Straps Fits Most Hands | Soft Hand Cover Compatible with Official Charging Dock Battery |
Ready to buy?
Amazon shows no buyable offer for HZLucki Controller Grips Cover Compatible with… at the last check. A similar in-stock product is Battery Head Strap for Meta Quest 3/3S…. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related VR Headsets & Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026: Setup and Real Transcode Limits
- Best Dorm Room Gaming Setup in 2026: 5 Picks That Fit One Desk
- Best GPU for 1440p Esports at 240Hz in 2026
- Cloudflare CEO: The Web's Future Is 'Pay to Crawl' as Bots Overtake Humans
- Best GPUs for 1440p Gaming in 2026
- KOORUI 27" 4K QD-Mini LED vs Samsung Odyssey 27" 4K: Which 4K Gaming Monitor Wins?
- 180Hz 1440p Monitors Hit Entry Pricing — Here's How the 4K Tier Compares
- Logitech G29 vs HORI Force Feedback Wheel: Which Entry Sim Racing Wheel Wins?
- IPEX-LLM + Ollama in Docker on Intel Arc: The 2026 Setup Guide
- Best GPU for 1080p Gaming in 2026: Where the RTX 3060 12GB Lands
- Anthropic's Samsung Chip Talks: Why Local Inference on an RTX 3060 Still Matters
- Best Budget Internal SSD for 2026: 5 Picks Tested by Value
- Ollama vs vLLM vs llama.cpp on a 12GB GPU: Which Wins for One User?
- LM Studio vs Jan.ai vs Ollama on an RTX 3060 12GB: Which Local Runner Wins?
- Best Budget SATA SSD for Gaming and Boot Drives in 2026
- Rescue Your Retro PC's Data Before the IDE or SATA Drive Dies
- Best Gaming Headset Under $50 for Console + PC (2026)
- Local-LLM PC Build on a 16GB Card: What r/LocalLLaMA and r/buildapc Concluded (2026)
- Build a Raspberry Pi 4 Pi-hole + Unbound Ad-Blocker in 2026
- How to run Llama 3.1 8B on Apple M4 Pro (2026)
- Best CPU for Streaming and Gaming on a Single PC in 2026
- Streamer PC Specs Decoded: The 2026 Parts That Match
- Does Ryzen 3D V-Cache Speed Up CPU-Only LLM Inference?
- Best Retro Gaming Gifts in 2026: 5 Picks for Console and PC Collectors
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090