CRJ Electronics CRJ 4-Pin ARGB Lighting Adapter Cable
Status: CRJ 4-Pin ARGB Lighting Adapter Cable - 6-inch: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: Per its Amazon listing, the CRJ Electronics CRJ 4-Pin ARGB Lighting Adapter Cable: ARGB Compatibility: Any 3-Pin 5V Adressable RGB device including fans; total cable length (including connectors) is 6.0 inches (15 cm).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:
Similar: CORSAIR Commander Duo iCUE Link RGB Lighting and… — $29.99 on Amazon as of 2026-11-21 21:45 UTC (price may vary).
Similar: GINTOOYUN RGB Extension Cable — $7.99 on Amazon as of 2026-11-21 23:18 UTC (price may vary).
Similar: EZDIY-FAB Shield ATX 24-Pin 90° Angle Adapter — $19.19 on Amazon as of 2026-11-21 11:24 UTC (price may vary).
Pros & Cons
Pros
- ✓ Total cable length (including connectors) is 6.0 inches (15 cm)
- ✓ Backed by CRJ Electronics's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
This premium 4-pin ARGB adapter cable is designed to be compatible with the Corsair iCUE ecosystem of lighting controllers, expanding connectivity to the much broader range of 5V ARGB lighting accessories. Note the LED count of your devices as the 4-pin RGB header and iCUE software is designed primarily for Corsair fans which feature a limited number of RGB LEDs. You should re-run the lighting setup wizard and manually configure each port, selecting the configuration that works best with your ARGB device. Designed to work with the 4-Pin SL series connector on Corsair Commander Core…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for CRJ Electronics CRJ 4-Pin ARGB Lighting Adapter Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Premium ARGB Adapter: Designed for connecting a broad range of 5V 3-Pin ARGB devices to the locking 4-Pin connector featured on Corsair iCUE lighting controllers
- Corsair Compatibility: Commander Core, Commander Core XT, Lighting Node Core, and RGB Fan Hub. Note that you should connect this adapter the last device in the sequence of your 4-pin RGB devices, as the lighting effect is duplicated for downstream devices.
- ARGB Compatibility: Any 3-Pin 5V Adressable RGB device including fans, lighting strips, cables, and other illuminated accessories.
- High-Quality Materials: Constructed with premium high density black sleeving, this cable combines functionality with a clean, professional aesthetic
- Total cable length (including connectors) is 6.0 inches (15 cm)
Full Specifications
| Brand | CRJ Electronics |
|---|---|
| Color | Black |
| Model | 4077 |
| Cable Type | Custom |
| Item Shape | Round |
| Model Name | Corsair RGB 4-Pin to 3-Pin ARGB Adapter Cable |
| Unit Count | 1 Count |
| Item Length | 6 inches |
| Part Number | 4077 |
| Connector Type | 3-pin 3p4f 5v Argb, Latching 4-pin Rgb |
| Number of Pins | 4 |
| Outer Material | sleeving |
| Maximum Voltage | 5 volts_of_direct_current |
| Number of Items | 1 |
| Special Feature | Sleeved |
| Connector Gender | Female |
| Specification Met | RoHS |
| ARGB Compatibility | Any 3-Pin 5V Adressable RGB device including fans, lighting strips, cables, and other illuminated accessories. |
| Compatible Devices | Commander Core, Commander Core XT, Lighting Node Core, RGB Fan Hub |
| Indoor Outdoor Usage | Indoor |
| Full listing title | CRJ 4-Pin ARGB Lighting Adapter Cable - 6-inch (15cm) Premium Black Sleeved, for Corsair iCUE Commander and Node 4-Pin RGB Lighting |
Ready to buy?
Amazon shows no buyable offer for CRJ 4-Pin ARGB Lighting Adapter Cable - 6-inch at the last check. A similar in-stock product is CORSAIR Commander Duo iCUE Link RGB Lighting and…. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best GPU for Local Llama 3 8B Under $400: Why the RTX 3060 12GB Wins
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget 1080p Gaming Build
- Best CPU Cooler for AMD Ryzen in 2026
- Samsung and SK Hynix Plan $590B Chip Push as Memory Prices Climb
- Best PC Game Streaming Gear in 2026: 5 Picks for Mic, Light & Capture
- Can the Ryzen 5 5600G Game at 1080p Without a Graphics Card in 2026?
- NVMe vs SATA for a Steam Library: 970 EVO Plus vs BX500
- Best 1440p Gaming Monitor for an RTX 3060: ASUS TUF 2K vs KOORUI 4K
- Logitech G502 Hero vs HyperX QuadCast 2 S vs Elgato Cam Link 4K: Building a Sub-$300 Streaming Starter Kit
- RTX 4090 AI Video Generation: 2026 Performance Guide
- Jellyfin NVENC Transcodes + a Local LLM on One RTX 3060 12GB
- Building a Period-Correct 2003 WinXP Gaming Rig with Sound Blaster Audigy and a Modern 8BitDo Controller
- Best SATA SSDs for Reviving an Old PC in 2026
- Best PlayStation Controllers for PC Gaming in 2026
- Best Budget CPU for Gaming + Productivity in 2026: The Honest Buying Guide
- DualSense vs GameSir G7 SE for PC Gaming in 2026: Which Controller Wins?
- Best Parts for a Local RAG Document-QA Workstation in 2026
- Downsized Your Homelab? Here's What It's Worth
- Best GPU for ComfyUI & Stable Diffusion Under $300 in 2026
- Microsoft Signals 32GB RAM as the Windows 11 Gaming Baseline
- How to run DeepSeek-R1 32B on Apple M4 Max
- Intel Arc B50 for Stable Diffusion: Setup & Performance
- Build a Raspberry Pi 4 8GB NAS with SATA SSDs in 2026
- Best Mouse Pad for FPS and MOBA Esports Players (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090