ITleads 2-in-1 PWM ARGB Fan Hub
Bottom line: The ITleads 2-in-1 PWM ARGB Fan Hub: 16 total ports: 8x 5V 3-pin ARGB plus 8x 4-pin PWM in one hub; main trade-off: signal extender only, not a standalone fan controller with its own speed dial.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 16 total ports: 8x 5V 3-pin ARGB plus 8x 4-pin PWM in one hub
- ✓ SATA power from the PSU instead of drawing fan load off the board header
- ✓ Magnetic back panel sticks to steel case surfaces, no screws or tape needed
- ✓ Consolidates multi-fan wiring into one hub for cleaner cable routing
Cons
- ✗ Signal extender only, not a standalone fan controller with its own speed dial
- ✗ Needs a free SATA power lead, tight in small-PSU or short-cable builds
- ✗ Magnet needs a steel mounting surface; aluminum or tempered glass won't hold
- ✗ ITleads lists no warranty terms in the product details
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for ITleads 2-in-1 PWM ARGB Fan Hub, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "16 total ports: 8x 5V 3-pin ARGB plus 8x 4-pin PWM in one hub"; the main trade-off is "Signal extender only, not a standalone fan controller with its own speed dial". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 16-port PWM ARGB hub: Provides 8 x 5V 3-pin ARGB ports and 8 x 4-pin PWM fan ports for multi-fan PC case builds
- Cleaner internal wiring: Connects multiple ARGB fans and PWM case fans from one hub to simplify cable routing inside the case
- SATA powered design: Powered by the PSU through SATA to support multiple fan and lighting connections
- Works as an extender: Passes 5V ARGB and PWM signals from the motherboard; not a standalone fan speed controller
- Magnetic case placement: Hidden magnetic back attaches to steel case surfaces for simple placement inside the PC case
Full Specifications
| Brand | ITleads |
|---|---|
| Model | Fan Hub |
| Voltage | 5 volts |
| Wattage | 12 watts |
| Material | Plastic |
| Unit Count | 1 Count |
| Part Number | ihtp fan hub |
| Compatibility | PC |
| Material Type | Plastic |
| Cooling Method | forced air |
| Number of Items | 1 |
| Number of Packs | 1 |
| Compatible Devices | Desktop |
| Included Components | MH-009 Fan Hub |
| SATA powered design | Powered by the PSU through SATA to support multiple fan and lighting connections |
| 16-port PWM ARGB hub | Provides 8 x 5V 3-pin ARGB ports and 8 x 4-pin PWM fan ports for multi-fan PC case builds |
| Power Connector Type | 3-Pin |
| Works as an extender | Passes 5V ARGB and PWM signals from the motherboard; not a standalone fan speed controller |
| Cleaner internal wiring | Connects multiple ARGB fans and PWM case fans from one hub to simplify cable routing inside the case |
| Magnetic case placement | Hidden magnetic back attaches to steel case surfaces for simple placement inside the PC case |
| Full listing title | 2-in-1 PWM ARGB Fan Hub, 16-Port SATA Powered Splitter | 8x 5V 3-pin ARGB and 8x 4-pin PWM ports with SATA power and magnetic base for PC case builds |
Ready to buy?
2-in-1 PWM ARGB Fan Hub, 16-Port SATA Powered Splitter | 8x 5V 3-pin ARGB and 8x 4-pin PWM ports with SATA power and magnetic base for PC case builds is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Is the RTX 3060 12GB Still Worth It for 1080p Gaming in 2026?
- Ollama vs LM Studio vs GPT4All on a 12GB GPU (2026)
- Noctua-Style Raspberry Pi 5 NAS Build Goes Viral — What Pi 4 Owners Can Borrow
- Raycast FPS in COBOL: Can a 60-Year-Old Language Render 3D?
- Best Streaming Kit for New Creators in 2026
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Streaming in 2026
- Super Mario 64 Nintendo DS Port Lands With Multiplayer Support
- Anthropic's 2GW AMD Deal: Should You Still Run Local?
- Build a Privacy-First Ring Alternative on a Raspberry Pi 4 in 2026
- Raspberry Pi 5 Pinout Guide: The Full 40-Pin GPIO Breakdown
- Best Game Streaming Starter Kit in 2026: Mic, Light, and Capture
- How to run Qwen 3 32B on NVIDIA GeForce RTX 4090
- Building a 2001 LAN Party Rig in 2026: GeForce 3, Pentium III, and Period-Correct Peripherals
- Building a New Gaming PC in 2026: The Complete Guide
- Have Qwen Said Anything About Further Qwen 3.6 Models?
- Black Friday Monitor Deals 2026: 5 Picks for Gaming and AI Desks
- Ultrawide vs 27-Inch 4K for Sim Racing on a G29 and RTX 3060
- MiMo-V2.5-Pro Local Hardware Requirements: 1T MoE, GGUF Sizes, Real Tok/s
- Build an 8-Node Raspberry Pi Cluster for Distributed Computing (2026)
- ComfyUI on an RTX 3060 12GB: Flux and SDXL Speeds in 2026
- PCIe Gen2/Gen3 1:2 Analog MUX: Practical Maker Implementation
- llama.cpp MTP support landed - Qwen3.6 27B at 2.44× on a Strix Halo, 2.17× on a RTX 3090 rig
- AMD Ryzen AI Max 395 Box: Can a 128GB Unified-Memory APU Replace a Dual-3090 Local LLM Rig?
- Gemini 3.6 Flash Shipped: Why Local Builders Still Reach for a 12GB GPU
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090