LINKUP

LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 70cm

Name: LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 70cm
Brand: LINKUP
SKU: B0CXJK448C

Bottom line: The LINKUP PCIe 5.0 Riser Cable: Rated for full PCIe 5.0 x16 bandwidth of 128GB/s; main trade-off: 70cm may leave extra slack in compact SFF or ITX cases.

Live pricing on eBay

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

🛒 See live eBay price Also on Amazon — Check price → Compare to similar expansion cards

By Mike Perry, Founder & Editor-in-Chief · Listing data updated 2026-11-07

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference. About the author →

Pros & Cons

Pros

✓ Rated for full PCIe 5.0 x16 bandwidth of 128GB/s
✓ Works with PCIe 4.0 boards and GPUs
✓ Validated on ASUS WRX80SE WiFi II and WRX90E Gen5 boards
✓ Multilayer shielding cuts crosstalk and EMI
✓ 70cm reach suits long routes in full towers and open benches

Cons

✗ 70cm may leave extra slack in compact SFF or ITX cases
✗ Right-angle connector fixes the cable's exit direction
✗ Needs a compatible vertical bracket and case layout
✗ Seller advises contacting them for tight fits rather than forcing parts

Manufacturer description

The LINKUP PCIe 5.0 Riser Cable lets you move your graphics card to wherever your case has the best airflow or the best view. This version is 70cm long with a right-angle connector. It is built for vertical GPU mounts, SFF/ITX sandwich cases, open benches and water-cooled rigs. The cable is rated for the full 128GB/s of PCIe 5.0 x16. Tuned impedance, premium conductors and multilayer shielding reduce crosstalk and EMI, so the link stays clean under load and through tight bends. It also works with PCIe 4.0 boards and cards. LINKUP says it has been validated on the ASUS WS WRX80SE WiFi II and…

SpecPicks Verdict

SpecPicks scored LINKUP PCIe 5.0 Riser Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. LINKUP's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this LINKUP riser work with my PCIe 4.0 motherboard or GPU?

Yes. The cable is fully backward-compatible with PCIe 4.0, so it works on Gen4 boards and cards and still supports Gen5 if you upgrade later.

Does it support the RTX 5090 at full PCIe 5.0 speed?

LINKUP lists it as ready for next-gen cards like the RTX 5090 and RX 9070. It is rated for the full 128GB/s of PCIe 5.0 x16.

How do I know if 70cm is the right length for my case?

Run a string from the motherboard PCIe slot to where the GPU PCB will sit. If 70cm is too long or too short, LINKUP makes the same cable in lengths from 2 to 35.4 inches.

What connector styles are available besides right angle?

The family also comes in straight, left angle, double reverse, single reverse right, single reverse left and single reverse straight. Pick the one that matches your mount and case layout.

Which motherboards has this riser been validated on?

LINKUP states validation on the ASUS WS WRX80SE WiFi II and WRX90E Gen5 boards. For other boards, check the product description for case and bracket compatibility.

Key Features

Verified Compatibility — Built for vertical GPU mount and standard layouts across towers, SFF/ITX sandwich cases, open benches, and water-cooled rigs. Fully backward-compatible with PCIe 4.0 and validated on ASUS WS WRX80SE WiFi II and WRX90E Gen5 boards. Ready for next-gen cards like RTX 5090 and RX 9070. Use this PCIe 5.0 riser cable to place the GPU exactly where airflow and aesthetics demand—without giving up stability.
Gen5 x16 Performance & Shielding — Delivers full 128GB/s on PCIe 5.0 x16 with tuned impedance, premium conductors, and multilayer shielding to suppress crosstalk and EMI. The AVA design targets clean eye margins under load and tight bends, making it a dependable PCIe Gen5 riser cable for high-FPS gaming, AI, and storage workflows. Replace Gen 3 and Gen 4 PCIe cables while preserving upgrade headroom for future GPUs.
Showcase Aesthetics, Improve Cooling — Move the card where it breathes. A vertical mount GPU clears intake for thick shrouds & radiators, reducing heat soak & noise while giving builds a clean, gallery-style look. Route like a tidy GPU extension cable & keep clocks steady thanks to robust shielding & low-loss geometry. Builders report good quality & that it simply works great when paired with the right bracket and case layout. View Product Description to ensure Compatibility with your PC case.
Installation Instructions — Measure with a string from the motherboard slot to the GPU PCB to pick the correct span. Seat connectors fully until latched; Fold & Flex in any way. Use standoffs and support brackets if the chassis requires it. If fit seems tight, contact us before forcing parts—we’ll advise the best path for your case model. Clear guidance turns this into a straightforward PCIe cable install, even in cramped ITX routes.
Choose the right Cable — Choose a length between 2–35.4 inches (see Installation Instruction) and the connector you need: right angle, straight, left angle, double reverse, single reverse right, single reverse left, or single reverse straight. One family covers ITX sandwiches, server trays, and vertical displays. Consistent Gen5 signal integrity across sizes makes it a flexible PCIe extender or GPU riser cable for clean cable management today with room to evolve tomorrow.

Full Specifications

Size	70cm - v2
Brand	LINKUP
Color	All Black
Model	AVA5
UnitCount	1
Manufacturer	LINKUP Technology Inc.
ItemPartNumber	AG-P5-33SR-070BK

Hardware benchmark data

Ready to buy?

LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 70cm is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

See live eBay listings → Check Amazon listing →