Skip to main content
LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 20cm
LINKUP

LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 20cm

Bottom line: The LINKUP PCIe 5.0 Riser Cable ($64.96 on Amazon as of 2026-11-07 17:17 UTC): PCIe 5.0 x16 rated for 128GB/s, full bandwidth for cards like the RTX 5090; main trade-off: fixed 20cm length and right-angle plug won't fit every case; measure first.

$64.96 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $64.96 Compare to similar accessories

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-07. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ PCIe 5.0 x16 rated for 128GB/s, full bandwidth for cards like the RTX 5090
  • ✓ Multilayer shielding and tuned impedance to suppress crosstalk and EMI
  • ✓ Fully backward-compatible with PCIe 4.0 boards and graphics cards
  • ✓ Validated on ASUS WS WRX80SE WiFi II and WRX90E Gen5 motherboards
  • ✓ Folds and flexes for ITX sandwich, open bench and water-cooled layouts

Cons

  • ✗ Fixed 20cm length and right-angle plug won't fit every case; measure first
  • ✗ Vertical GPU bracket not included; the cable alone can't mount the card
  • ✗ Gen5 is more than you need if your GPU only uses PCIe 4.0 bandwidth
  • ✗ Seven connector variants make it easy to order the wrong angle

Manufacturer description

The LINKUP PCIe 5.0 riser cable lets you move your graphics card where the airflow is better and the build looks cleaner, while keeping a full Gen5 link. This 20cm version has a right-angle connector for vertical GPU mounts in towers, SFF/ITX sandwich cases, open benches and water-cooled rigs. The cable is rated for PCIe 5.0 x16 at 128GB/s. LINKUP uses tuned impedance, premium conductors and multilayer shielding to cut crosstalk and EMI, so the signal stays clean even through tight bends. That makes it a good fit for current flagship cards like the RTX 5090 and RX 9070. It is also fully…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored LINKUP PCIe 5.0 Riser Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. LINKUP's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this riser run my RTX 5090 at full PCIe 5.0 speed?

It is rated for PCIe 5.0 x16 at 128GB/s, and LINKUP names the RTX 5090 and RX 9070 as target cards. Your motherboard slot also has to support Gen5 x16 to get the full link.

Does it work with a PCIe 4.0 motherboard or GPU?

Yes. The cable is fully backward-compatible with PCIe 4.0, so it runs at Gen4 speeds on Gen4 hardware. You can also use it to replace older Gen3 or Gen4 riser cables.

How do I know if 20cm is the right length for my case?

LINKUP suggests running a string from the motherboard slot to where the GPU PCB will sit. If 20cm doesn't fit, the same cable family comes in lengths from 2 to 35.4 inches.

Which connector angle should I pick for a vertical mount?

This listing is the right-angle version. LINKUP also sells straight, left-angle, double reverse, and three single-reverse versions (right, left and straight). Check your case's vertical bracket layout before you choose, or contact LINKUP support for advice on your specific case.

What warranty and support does LINKUP offer?

LINKUP offers a direct-exchange warranty and online and email support, and says it answers every inquiry within 24 hours. The listing doesn't state how long coverage lasts, so check the product listing for current warranty terms.

Key Features

  • Verified Compatibility — Built for vertical GPU mount and standard layouts across towers, SFF/ITX sandwich cases, open benches, and water-cooled rigs. Fully backward-compatible with PCIe 4.0 and validated on ASUS WS WRX80SE WiFi II and WRX90E Gen5 boards. Ready for next-gen cards like RTX 5090 and RX 9070. Use this PCIe 5.0 riser cable to place the GPU exactly where airflow and aesthetics demand—without giving up stability.
  • Gen5 x16 Performance & Shielding — Delivers full 128GB/s on PCIe 5.0 x16 with tuned impedance, premium conductors, and multilayer shielding to suppress crosstalk and EMI. The AVA design targets clean eye margins under load and tight bends, making it a dependable PCIe Gen5 riser cable for high-FPS gaming, AI, and storage workflows. Replace Gen 3 and Gen 4 PCIe cables while preserving upgrade headroom for future GPUs.
  • Showcase Aesthetics, Improve Cooling — Move the card where it breathes. A vertical mount GPU clears intake for thick shrouds & radiators, reducing heat soak & noise while giving builds a clean, gallery-style look. Route like a tidy GPU extension cable & keep clocks steady thanks to robust shielding & low-loss geometry. Builders report good quality & that it simply works great when paired with the right bracket and case layout. View Product Description to ensure Compatibility with your PC case.
  • Installation Instructions — Measure with a string from the motherboard slot to the GPU PCB to pick the correct span. Seat connectors fully until latched; Fold & Flex in any way. Use standoffs and support brackets if the chassis requires it. If fit seems tight, contact us before forcing parts—we’ll advise the best path for your case model. Clear guidance turns this into a straightforward PCIe cable install, even in cramped ITX routes.
  • Choose the right Cable — Choose a length between 2–35.4 inches (see Installation Instruction) and the connector you need: right angle, straight, left angle, double reverse, single reverse right, single reverse left, or single reverse straight. One family covers ITX sandwiches, server trays, and vertical displays. Consistent Gen5 signal integrity across sizes makes it a flexible PCIe extender or GPU riser cable for clean cable management today with room to evolve tomorrow.
  • Customer Support & Direct-Exchange Warranty — We offer online and email customer support—every inquiry answered within 24 hours. Enjoy a hassle-free direct exchange warranty and prompt resolution of concerns; Amazon Business customers can access Business Pricing. If anything isn’t right, reach out and we’ll resolve it fast—service that matches top-tier PCIe 5.0 performance.

Full Specifications

Size20cm - v4
BrandLINKUP
ColorAll Black
ModelLINKUP - AVA5
UnitCount1
ManufacturerLINKUP Technology Inc.
ItemPartNumberAG-P5-33SR-020BK

Hardware benchmark data

Ready to buy?

LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 20cm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $64.96

*Price sourced from Amazon.com. Last updated 2026-11-07. Price and availability subject to change.

Read our analysis

SpecPicks coverage that features this Accessorie.

Related Accessories

LINKUP PCIe 5.0 Riser Cable head-to-head

Side-by-side specs, prices, and a pick for each matchup — no tab-switching.

Build your own comparison →

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
LINKUP PCIe 5.0 Riser Cable | Vertical GPU Mount | Right Angle, 20cm
$64.96
View on Amazon →