MOOKEERF BNC Male to Male Coaxial Cable
Bottom line: The MOOKEERF BNC Male to Male Coaxial Cable: Listed loss of just -2.65 dB over 25 ft at 1800 MHz; main trade-off: 50 ohm only, a mismatch for 75 ohm composite or SDI video gear.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Listed loss of just -2.65 dB over 25 ft at 1800 MHz
- ✓ VSWR rated at 1.15 or lower for a clean 50 ohm match
- ✓ Pure copper center conductor with 95% tinned copper braid
- ✓ 2.2-inch adhesive tube locks each BNC connector to the cable
- ✓ Waterproof, oxidation-resistant PVC jacket for long outdoor runs
Cons
- ✗ 50 ohm only, a mismatch for 75 ohm composite or SDI video gear
- ✗ BNC male on both ends; SMA, N or PL-259 gear needs adapters
- ✗ RG8X is thicker and stiffer than RG58 on a crowded bench
- ✗ Loss is only specified at 1800 MHz; other bands are not listed
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MOOKEERF BNC Male to Male Coaxial Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "Listed loss of just -2.65 dB over 25 ft at 1800 MHz"; the main trade-off is "50 ohm only, a mismatch for 75 ohm composite or SDI video gear". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [Specification]-Connector: BNC male to BNC male, impedance: 50 ohm, Cable type: RG8X.
- [Ultra Low Loss]-The RG8X jumper cable got a professional structure and take good advantage in transmit data with lower signal attenuation that low to -2.65db(25ft,1800MHz) and keep VSWR≤1.15.
- [Firm Connected]-We fix the connector with 2.2" adhesive tube and it will not easy to fall off from the cable. And that can provide a heavy duty and firmly connection, really durable and professional coaxial cable.
- [High Grade Material]-This RG8X BNC cable inner conductor is made by pure copper and build with 95% tinned copper braid, that can make sure the signal transmission efficiently and stable. The PVC jacket is waterproof and has strong oxidation resistance, and can be adapted to outdoor for a long time.
- [Widely Application]-Compatible with device which contain BNC connector, including splitter, 3G/4G/LTE antenna, Oscilloscope, Spectrum, Analyzer and Network systems etc.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Red |
| Model | RED-RG8X-BNC-JJ-25FT |
| Weight | 3g |
| Frequency | 1800 MHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Model Name | RED-RG8X-BNC-JJ |
| Unit Count | 1 Count |
| Part Number | RED-RG8X-BNC-JJ-25FT |
| Connector Type | BNC |
| Number of Pins | 1 |
| Outer Material | Polyvinyl Chloride (PVC) |
| Number of Items | 1 |
| Special Feature | gps |
| Connector Gender | Male-to-Male |
| Specification Met | IEEE, UL |
| Compatible Devices | Router |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Warranty Description | 120 Days Warranty From the Date of Purchase |
| Full listing title | BNC Male to Male Coaxial Cable - 50 ohm Ultra Low Loss RG8X Coax Cable for Antenna, RF Radio, Modem, Oscilloscope, Spectrum Analyzer, Signal Generator (25FT) |
Ready to buy?
BNC Male to Male Coaxial Cable - 50 ohm Ultra Low Loss RG8X Coax Cable for Antenna, RF Radio, Modem, Oscilloscope, Spectrum Analyzer, Signal Generator (25FT) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- AI-Driven Driver Install on Win98 + WinXP: Vision-LLM Walks the Installer (Field Report)
- Nemotron 3 Ultra vs MiniMax M3: Best Open Model for a 12GB Rig
- Inside the Creative Katana V2X Soundbar Teardown — and What It Says About Sound Blaster
- Local AI Server LLM Setups 2025: What Hardware Matters
- Claude Fable 5 Beats GPT-5.5 by 13 Points: The Local-LLM Reality Check
- Ryzen 7 5800X3D vs Core i7-14700K on DDR4 for 1440p Gaming (2026)
- Cloning a Win98 Voodoo3 Boot Drive: SATA-IDE Adapter Workflow
- Best Steam Deck Docked Setup for a 4K Desk in 2026: Dock, Monitor, Storage
- Best Raspberry Pi for a Retro Console Build in 2026: Pi 4 8GB vs Pi Zero 2 W
- Best Budget CPU for 1080p Gaming: Ryzen 7 5700X vs 5800X vs i7-9700K
- Running Qwen3.5/3.6 with NextN MTP on an RTX 3090 Ti
- Mistral 7B vs Mistral Small 24B: GPU Requirements Compared
- Can a Raspberry Pi 4 Run a Local LLM? Ollama tok/s Tested
- 3dfx Voodoo5 5500 AGP tuning guide — 2026 edition
- Best Budget SSD for Gaming and Local-LLM Storage in 2026
- Why Preassembled PCs Beat DIY Builds in 2026
- Steam Deck Sleep Mode: Should You Leave It Plugged In?
- Best GPU for 1080p Esports in 2026: High-Refresh Without Overspending
- Self-Host a 24/7 FM Radio Station on a Raspberry Pi Zero 2W
- Is the RTX 3060 12GB Still Worth Buying in 2026?
- Best 32-Inch 4K Gaming Monitor for PS5 + PC 2026
- Black Friday Standing Desk & Monitor Arm Deals: 5 Picks
- Ryzen 7 5800X vs Ryzen 7 5700X for 2026 Budget Gaming Builds
- Best CPU Coolers for AMD Ryzen 5000 (AM4) in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090