MOOKEERF BNC Male Coaxial Cable
Bottom line: The MOOKEERF BNC Male Coaxial Cable: 50 ohm RG8X coax with BNC male plugs on both ends, 10 ft length; main trade-off: BNC male on both ends, so SMA, N-type or UHF gear needs a separate adapter.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 50 ohm RG8X coax with BNC male plugs on both ends, 10 ft length
- ✓ Rated loss as low as -2.65 dB per 25 ft at 1800 MHz, with VSWR at or below 1.15
- ✓ Pure copper center conductor plus a 95% tinned copper braid shield
- ✓ 2.2-inch adhesive tube anchors each BNC connector against pull-out
- ✓ Waterproof, oxidation-resistant PVC jacket suited to long-term outdoor runs
Cons
- ✗ BNC male on both ends, so SMA, N-type or UHF gear needs a separate adapter
- ✗ RG8X is thicker and stiffer than RG58, so it is harder to route on a crowded bench
- ✗ 50 ohm only, so it is a poor match for 75 ohm video, CCTV or cable TV runs
- ✗ Loss is quoted only at 1800 MHz; no power-handling or max-frequency rating is listed
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MOOKEERF BNC Male Coaxial Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "50 ohm RG8X coax with BNC male plugs on both ends, 10 ft length"; the main trade-off is "BNC male on both ends, so SMA, N-type or UHF gear needs a separate adapter". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [Specification]-Connector: BNC male to BNC male, impedance: 50 ohm, Cable type: RG8X.
- [Ultra Low Loss]-The RG8X jumper cable got a professional structure and take good advantage in transmit data with lower signal attenuation that low to -2.65db(25ft,1800MHz) and keep VSWR≤1.15.
- [Firm Connected]-We fix the connector with 2.2" adhesive tube and it will not easy to fall off from the cable. And that can provide a heavy duty and firmly connection, really durable and professional coaxial cable.
- [High Grade Material]-This RG8X BNC cable inner conductor is made by pure copper and build with 95% tinned copper braid, that can make sure the signal transmission efficiently and stable. The PVC jacket is waterproof and has strong oxidation resistance, and can be adapted to outdoor for a long time.
- [Widely Application]-Compatible with device which contain BNC connector, including splitter, 3G/4G/LTE antenna, Oscilloscope, Spectrum, Analyzer and Network systems etc.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Red |
| Model | RED-RG8X-BNC-JJ-10FT |
| Weight | 3g |
| Frequency | 1800 MHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Model Name | RED-RG8X-BNC-JJ |
| Unit Count | 10 Feet |
| Part Number | RED-RG8X-BNC-JJ-10FT |
| Connector Type | BNC |
| Number of Pins | 2 |
| Number of Items | 1 |
| Special Feature | gps |
| Connector Gender | Male-to-Male |
| Specification Met | RoHS |
| Compatible Devices | Router |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Warranty Description | 120 Days Warranty From the Date of Purchase |
| Customer Package Type | sealed anti-static bag or coiled in protective tubing |
| Full listing title | MOOKEERF BNC Male Coaxial Cable - 50 ohm Ultra Low Loss RG8X Coax Cable for Antenna, RF Radio, Modem, Oscilloscope, Spectrum Analyzer, Signal Generator (10FT) |
Ready to buy?
MOOKEERF BNC Male Coaxial Cable - 50 ohm Ultra Low Loss RG8X Coax Cable for Antenna, RF Radio, Modem, Oscilloscope, Spectrum Analyzer, Signal Generator (10FT) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc vs NVIDIA 2026: Local LLM Tokens per Dollar
- CompactFlash Boot Drive for Windows 98: Transcend CF133 Setup and Benchmarks
- Ryzen 7 5800X vs i7-9700K: Better Home Workstation in 2026?
- Forza Horizon 6 on the Steam Deck: Settings, Frame Pacing, and the SSD Question
- Best SSD for a Local LLM Model Library in 2026: Capacity vs Load Speed
- 8BitDo Pro 2 vs GameSir G7 SE vs DualSense: the best PC controller for retro emulation in 2026
- Use a Raspberry Pi 4 as a Second Monitor or KVM in 2026
- Qwen2.5 7B on a Budget: RTX 3060 12GB vs Ryzen 5 5600G iGPU (2026)
- Imaging Vintage IDE Drives in 2026: The Retro-PC Backup Workflow
- Dual RTX 3090 Ti in 2026: Worth It vs. the Alternatives?
- How to Run a SATA SSD on a Windows XP Retro Gaming PC (AHCI + Adapters)
- StarCraft Brood War in 2026: Joining Battle.net Classic, the Fish Server, and ASL Pro Circuit
- Imaging Vintage IDE Drives to Preserve 90s Game CDs
- Best GPU for Local LLMs Under $400 in 2026: Why 12GB Still Wins
- Best Streaming Gear for New Content Creators in 2026
- Best Starter Kit for Learning Robotics on Raspberry Pi (2026)
- Ultrawide vs 27-Inch 4K for Sim Racing on a G29 and RTX 3060
- KOORUI 27" QD-Mini LED vs Samsung Odyssey 27" 4K: Which 4K Panel for Console + PC?
- Best CPU Under $300 for a 1080p Gaming Build (2026)
- DualSense vs GameSir G7 SE for PC Sim Racing: Which Controller Wins in 2026
- Raycast FPS in COBOL: Can a 60-Year-Old Language Render 3D?
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- GeForce 4 Ti 4200 AGP: The Best-Value Retro GPU for a 2002 Windows XP Build
- UT99 OldUnreal 469 Patch in 2026: Migrate Configs, Rejoin Modern Servers, and Tune Mouse Precision
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090