WINSINN DC 60mm Fan 24V 6020 Dual Ball Bearing Brushless Cooling 60x20mm 2PIN (Pack of 4Pcs)
Bottom line: Per its Amazon listing, the WINSINN DC 60mm Fan 24V 6020 Dual Ball Bearing Brushless Cooling: ✔️WINSINN 6020 fan 24V which small size and lightweight design; ✔️Rated Voltage: DC 24V.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ ✔️WINSINN 6020 fan 24V which small size and lightweight design
- ✓ ✔️Rated Voltage: DC 24V
- ✓ Backed by WINSINN's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for WINSINN DC 60mm Fan 24V 6020 Dual Ball Bearing Brushless Cooling…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- ✔️WINSINN 6020 fan 24V which small size and lightweight design, suitable for 3D printer / PC CPU server or any DIY cooling and narrow place.
- ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- ✔️Rated Voltage: DC 24V, Current: 0.06A, Power: 1.44W, Speed: 4800PRM, Air Pressure: 5.50mmH₂O, Airflow: 21.6CFM, Noise: 35dBA
- ✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, DVD player, small communication devices, PC CPU server, DVRs, Switches, network storage devices and can be used as a replacement fan for any electronic products.
- ✔️Packing List: 4 x 60mm Fan 24v - Dual Ball Bearing, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 60mm x 60mm x 20mm
Full Specifications
| Brand | WINSINN |
|---|---|
| Model | 602024DB2P |
| Voltage | 24 Volts |
| Wattage | 1.44 watts |
| Material | Copper |
| Unit Count | 4.0 Count |
| Noise Level | 35 Decibels |
| Part Number | F602024DB4P |
| Compatibility | PC |
| Material Type | Copper |
| Cooling Method | Air |
| Number of Items | 4 |
| Air Flow Capacity | 21.6 Cubic Feet Per Minute |
| Compatible Devices | Desktop |
| ✔️Packing List | 4 x 60mm Fan 24v - Dual Ball Bearing, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 60mm x 60mm x 20mm |
| ✔️Rated Voltage | DC 24V, Current: 0.06A, Power: 1.44W, Speed: 4800PRM, Air Pressure: 5.50mmH₂O, Airflow: 21.6CFM, Noise: 35dBA |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 4800 RPM |
| Item Dimensions L x W x H | 2.36"L x 0.79"W x 2.36"H |
Benchmark data for other processors
Ready to buy?
WINSINN DC 60mm Fan 24V 6020 Dual Ball Bearing Brushless Cooling 60x20mm 2PIN (Pack of 4Pcs) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Best Capture Device for Recording Retro Consoles and Old PCs in 2026
- Local AI Image Generation: Best AMD GPUs for 2026
- Best GPU for Local LLMs in 2026: Why the RTX 3060 12GB Still Wins on Value
- Ultrawide vs 27-Inch 4K for Sim Racing on a G29 and RTX 3060
- Open-Source NVIDIA NVK Vulkan Driver Now Supports DLSS
- Claude Opus 4.8 Ships, Tops GPT-5.5 on Intelligence Index
- Troubleshooting 3dfx Voodoo Cards on Modern AGP Builds: The 2026 Recovery Playbook
- 16% of Freelance Jobs Are Now AI-Doable: The Local Agent Rig That Runs Them
- Claude Fable 5 Tops the Intelligence Index: What Frontier Cloud AI Means for Local Rig Builders
- GPT-5.6 Sol Now Requires US Government Approval Per Customer
- Best CPU Coolers for High-TDP Gaming Builds in 2026
- Samsung's 360Hz 4K QD-OLED vs Budget 4K Gaming Monitors: Is the Premium Worth It?
- Gemma 4 and Larger Qwen 3.6: What Hardware You'll Actually Need
- Best SSD for a 4TB Steam Game Library Under $250 (2026)
- Prime Day 2026: Gaming Monitor Deals Worth a Look
- CompactFlash vs SATA-to-IDE: The Best Silent Boot Drive for a Win98 PC
- What We Lost When LAN Parties Died: A 2026 Editorial
- Ryzen 7 5800X + RTX 5060 Combo Hits $439 With Cooler
- Modern Sound Cards on Retro Rigs: The Sound BlasterX G6 for Win9x and DOS Audio
- 1440p High-Refresh vs 4K for Gaming in 2026: ASUS TUF 27" QHD vs SANSUI/KOORUI 4K
- Best Game Controllers for PC, Retro & Handheld in 2026
- How to Run a SATA SSD on a Windows XP Retro Gaming PC (AHCI + Adapters)
- Local AI Server LLM Setups 2025: What Hardware Matters
- Best 1440p Monitor for an RTX 3060: Matching Panel to GPU
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090