Slip Yoke 2-3-8251X Fit for Ford Mustang C-4, T5, T9, T10 Top Loader Tremec 3550 AOD Transmission, 1310 Series
Bottom line: The GLOCRORET Slip Yoke 2-3-8251X Fit for Ford Mustang C-4 is a specs-and-price decision rather than a crowd-consensus one in the flight sim gear category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ OE/Part Number: 2-3-8251X, 1310 Series Transmission Slip Yoke
- ✓ Backed by GLOCRORET's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
1310 Series Transmission Slip Yoke 2-3-8251XSpecification:Universal Joint Width (L): 3.219''Bearing Cap Diameter (D): 1.062''Center Line to End of Spline (J): 6.5''Hub Diameter (R): 1.5''Spline Outside Diameter: 1.22''Number of Spline: 27 Based on 28 Spline
SpecPicks Verdict
SpecPicks scored GLOCRORET Slip Yoke 2-3-8251X Fit for Ford Mustang C-4 using a rating × review-volume × price-fit model applied to published specs and reviews across the flight sim gear category. GLOCRORET's flight sim gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for flight sim gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- OE/Part Number: 2-3-8251X, 1310 Series Transmission Slip Yoke
- Fitment:1310 Series U-Joint, Cap Diameter: 1.062", Width: 3.219". U joint Reference Numbers: 5-153X / 5-1310X / 5-1310-1X
- Fitment: for Ford 1310 Series Drive Lines Used on C-4 T-5 AOD Top Loader and Tremec 3550 Transmissions Starting from 1965-1995.
- Specification:Universal Joint Width (L): 3.625'', Bearing Cap Diameter (D): 1.062'', Center Line to End of Spline (J): 6.5'',Hub Diameter (R): 1.5'', Spline Outside Diameter: 1.220'', Number of Spline: 27 Based on 28 Spline
- IMPORTANT: The Slip Yoke Are Very Similar In Shape, Please Double Check Your Original Part Dimensions and OE Number Before Ordering. Thank You for Your Understanding.
Full Specifications
| Brand | GLOCRORET |
|---|---|
| Fitment | 1310 Series U-Joint, Cap Diameter: 1.062", Width: 3.219". U joint Reference Numbers: 5-153X / 5-1310X / 5-1310-1X |
| Exterior | Machined |
| OE/Part Number | 2-3-8251X, 1310 Series Transmission Slip Yoke |
| Package Dimensions | 7.08 x 4.33 x 3.54 inches |
| Manufacturer Part Number | 2-3-6081X |
Ready to buy?
Slip Yoke 2-3-8251X Fit for Ford Mustang C-4, T5, T9, T10 Top Loader Tremec 3550 AOD Transmission, 1310 Series is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Flight Sim Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Can a Local RTX 3060 12GB LLM Debug Linux Boot Like Gemini?
- CompactFlash and IDE-to-USB Adapters for Retro PC Builds in 2026
- Sega Genesis Mini vs SNES Classic: Which Plug-and-Play Console Holds Up in 2026?
- OpenAI and Broadcom Unveil 'Jalapeño' Inference Chip
- Best Gaming Monitor for Console and PC Hybrid Setups Under $300 in 2026
- Qwen 3.6 27B at 2x tok/s: Luce DFlash on One RTX 3090
- AVX-512 Lifts Linux RAID Up to 41% on AMD Ryzen Chips
- Qwen3.6 27B on a 12GB GPU: Quantization, Context, and Real-World Tok/s
- Raspberry Pi 5 + Hailo-8L vs Coral Dual Edge TPU: Which AI Accelerator HAT Wins in 2026?
- Best Gaming Monitor for Console Gaming in 2026
- Mistral 7B vs Mistral Small 24B: GPU Requirements Compared
- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a Secondary or Retro Build in 2026
- 8BitDo Sn30 Pro vs Pro 2: Best Bluetooth Controller for Raspberry Pi 4 Emulation
- Pi Pico Puts Bluetooth Keyboards on the I2C Bus
- GeForce FX 5900 Ultra Period-Correct WinXP Build Guide: Driver Hunt, Half-Life 2 Mixed-Mode, and Doom 3…
- Claude Sonnet 5: What Shipped and What It Means for Local Rigs
- Local AI News You Missed in April 2026
- Can a Raspberry Pi 4 8GB Run Local LLMs in 2026?
- Intel Arc LLM Support: What Works in 2026
- MicroPython Now Runs on the Super Nintendo — On Real Hardware
- Beyond LLMs: How Agent Logic Scales Enterprise AI
- What Happened to the LLM Training Data Shortage?
- Best Raspberry Pi Starter Kits for Beginners (2026)
- Sub-$300 4K Mini-LED Gaming Monitors Hit the Mainstream
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090