PinQiongZhe
Micro SD Card to SD Card Extension Cable 3D Printer Adapter Cable FPC Material Memory Card Male and Female Adapters with Screw Holes Designed for Memory Cards Size External Conversion 3.9 in./15cm
Bottom line: The Micro SD Card to SD Card Extension Cable 3D Printer Adapter Cable FPC is a specs-and-price decision rather than a crowd-consensus one in the storage adapters category, priced around $14.99 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ speeds,Compatible with: 3D printers, GPS navigation, computers, cell phones, Raspberry Pi
- ✓ Backed by PinQiongZhe's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored Micro SD Card to SD Card Extension Cable 3D Printer Adapter Cable… using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. PinQiongZhe's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Purpose: Convenient equipment micro SD conversion SD card use, such as: equipment upgrades, rapid replacement of SD card, heat dissipation, protection of the original card slot
- speeds,Compatible with: 3D printers, GPS navigation, computers, cell phones, Raspberry Pi
- High-quality materials: FPC flexible circuit boards with perforated design for more stable transmission
- Includes: 1 extension cable (5.9 in/15 cm), 1 ferrule adapter, 2 double-sided tapes, 2 screws
- Note: Memory card is not included, please insert the SD card into the adapter before inserting it into the device for use, when replacing another SD card, please unplug the end of the micro SD card from the device before replacing the SD card, or reboot the device after installing it, hot-swap is not supported
Full Specifications
| Brand | PinQiongZhe |
|---|---|
| Color | Orange |
| Includes | 1 extension cable (5.9 in/15 cm), 1 ferrule adapter, 2 double-sided tapes, 2 screws |
| Unit Count | 1.0 Count |
| Model Number | 002 |
| Warranty Type | Limited |
| Connector Type | sd |
| Item Dimensions | 5.9 x 1.4 x 0.15 inches |
| Mfr Part Number | 002 |
| Number of Items | 50 |
| Number of Ports | 2 |
| Power Plug Type | No Plug |
| Compatible Devices | 3d printer, Car Navigation, multimedia equipment |
| Warranty Description | 1 Year Warranty |
| High-quality materials | FPC flexible circuit boards with perforated design for more stable transmission |
| speeds,Compatible with | 3D printers, GPS navigation, computers, cell phones, Raspberry Pi |
| Item dimensions L x W x H | 5.9 x 1.4 x 0.15 inches |
| Specific Uses For Product | Cell Phone |
Ready to buy?
Micro SD Card to SD Card Extension Cable 3D Printer Adapter Cable FPC Material Memory Card Male and Female Adapters with Screw Holes Designed for Memory Cards Size External Conversion 3.9 in./15cm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Best GPU for Local Llama 3 8B Under $400: Why the RTX 3060 12GB Wins
- Is the RTX 3060 12GB Still Worth Buying in 2026?
- NVK Open-Source Vulkan Driver Gains Experimental DLSS on Linux
- Best Budget Gaming Mouse + Mousepad Combo Under $80 in 2026
- GPT and Claude Flunked Bridgewater's Finance Test — Why a Local RAG Box Fills the Gap
- Best NVMe SSD for a Compact Gaming PC: WD_BLACK SN770 in 2026
- Started a Homelab Last Month — Is the Ryzen 5 5600G Build Right?
- Best NVIDIA RTX 3060 Graphics Cards in 2026: 5 AIB Picks Compared
- Running local LLMs on the Ryzen 5 5600G iGPU (no dedicated GPU) in 2026
- RTX 3060 12GB for ComfyUI & Stable Diffusion: The VRAM Budget Pick (2026)
- Best Streaming Webcam and Mic Setup Under $300 (2026)
- On-Device AI Keyboards: Can an RTX 3060 12GB Train the Model?
- Period-Correct Windows XP Gaming PC: 2002-2005 Build Guide for 2026
- Best SSDs for a Raspberry Pi homelab NAS in 2026
- Best 4K Monitor for PS5 and Console Gaming Under $400 (2026)
- Minimal Raspberry Pi 5 Case: Friction-Fit 3D Printing Guide
- Can a Raspberry Pi 4 8GB Run a Local LLM with Ollama?
- Imaging Vintage IDE Drives in 2026: The Retro-PC Backup Workflow
- Streamer PC Specs Decoded: The 2026 Parts That Match
- Best Gaming Monitor for PS5 & High-Refresh PC Gaming (2026)
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Setup and Real tok-per-image Math
- Period-Correct LAN Party Build: 2002 Pentium 4 + GeForce 4 Ti + Sound Blaster Live
- The Hackaday Europe 2026 Retro PC Build: What They Actually Built and Why It Matters
- Best PC Upgrades to Buy Before the 2026 Memory Price Spike
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090