FNIRSI
FNIRSI HS-02B 100W Portable Corded Micro Soldering Iron Kit
Bottom line: The FNIRSI HS-02B 100W Portable Corded Micro Soldering Iron Kit ($70.99 on Amazon as of 2026-10-06): 100W max power hits 212-842 F, wide enough for SMD work and heavier joints; main trade-off: corded only - no battery or cordless operation despite the compact pen form.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 100W max power hits 212-842 F, wide enough for SMD work and heavier joints
- ✓ 2-second heat-up and 3-second tinning per FNIRSI's spec
- ✓ Ships with 3 210-series tips (I, IS, K) plus the 100W adapter in the box
- ✓ 0.96-inch display and shorter tip vs the older HS01 for closer sightlines
- ✓ Auto sleep and auto power-off with user-editable parameter settings
Cons
- ✗ Corded only - no battery or cordless operation despite the compact pen form
- ✗ Overcurrent trips can restart the unit unless you switch to Adaptive Power Mode
- ✗ 100W is a ceiling, not a guarantee - output drops with a weaker supply
- ✗ 210-series tip standard limits you to that tip family for replacements
SpecPicks Verdict
SpecPicks scored FNIRSI HS-02B 100W Portable Corded Micro Soldering Iron Kit using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. FNIRSI's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【FNIRSI HS02 Soldering Iron】We upgraded HS01, HS02 has a better grip, shorter tip, larger 0.96'' display, and faster heating speed.It is suitable for electronic component repair, jewelry repair, circuit board soldering, micro soldering
- 【Supports up to 100W & 3 S Tinning】100W is the maximum power supported by the device. It can still be used normally if it is lower than 100W.If current is too high, overcurrent protection may restart the device—switch to Adaptive Power Mode for stable use.The temperature is adjustable within the range of 212-842 °F.
- 【Portable and Lightweight】We provide a storage case for the soldering pen, which will make it easier for you to carry it outside.Its ergonomics are ensures greater results and comfort
- 【3 Groups Pre-set Temp】Preset multiple groups of fixed temperature, fast temperature adjustment without time-consuming
- 【Smart & Safe】 features sleep, automatic power-off, and other modes.Customize setting,set soldering iron parameters according to needs to meet daily usage
- 【Extensive accessories】 HS02B is equipped with 3 soldering iron tips (I, IS, K). The integrated design allows the soldering iron to heat up quickly and maintain a stable temperature. And the 100 W charging adapter allows you to use it immediately
Full Specifications
| Brand | FNIRSI |
|---|---|
| Wattage | 100 watts |
| Head Style | Pencil |
| Style Name | Pencil |
| Item Length | 6.72 inches |
| Model Number | HS-02 |
| Power Source | USB Powered |
| Compatibility | Switch |
| Item Type Name | Soldering Iron |
| Handle Material | Rubber or Silicone |
| Heating Element | Ceramic |
| Special Feature | Portable |
| Additional Features | Portable |
| Included Components | 100W PD Adapter, PD Charging Cable, Soldering Iron, Soldering Iron Stand, Soldering Iron Tips |
| Manufacturer Part Number | HS-02 |
| Specific Uses For Product | Jewelry Soldering, Residential Use |
| Full listing title | FNIRSI HS-02B 100W Portable Corded Micro Soldering Iron Kit,2S Fast Heating | 212-842℉, Pre-set 3 Groups Temps, Auto Sleep, 3 Pcs 210 Tips, Smart Soldering Iron Pen for Electronics Repair |
Ready to buy?
FNIRSI HS-02B 100W Portable Corded Micro Soldering Iron Kit,2S Fast Heating | 212-842℉, Pre-set 3 Groups Temps, Auto Sleep, 3 Pcs 210 Tips, Smart Soldering Iron Pen for Electronics Repair is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Mount a 90s Big-Box CD-ROM ISO on Win98 Without a CD Drive: The CompactFlash + IDE Workflow
- NVIDIA Nemotron 3 Ultra: What It Takes to Run Locally
- OpenAI Names Its Biggest Data Center Yet, With NVIDIA Backing: What It Means
- Build a Real-Time Flight Tracker (ADS-B) on a Raspberry Pi 4 in 2026
- Self-Host Immich on a Raspberry Pi 4 8GB: SSD Boot, Power Draw, and Real Performance
- Started a Homelab Last Month — Is the Ryzen 5 5600G Build Right?
- How to run Qwen 3 14B on Apple M4 Max
- What Is Mistral AI? The OpenAI Rival Explained (2026)
- Unified RAM for LLMs: 2025-2026 Hardware Guide
- Ryzen 7 5800X3D vs Intel Core i7-14700K for DDR4 Gaming
- Best Gaming Keyboard for Office and Gaming Crossover (2026)
- Best NVMe SSD for Local AI Model Storage in 2026
- Crucial BX500 vs Samsung 970 EVO Plus: SATA vs NVMe
- Ryzen 7 5700X vs 5800X for 1080p & 1440p Gaming in 2026
- Sound Blaster AWE64 vs Aureal Vortex 2: The Win98 Audio API War, Revisited
- AMD Ryzen AI Max+ 395 Box (Strix Halo) for Local LLMs: What 128GB Unified Memory Actually Buys You
- Microsoft + Nvidia AI PCs Run Real Agents: The Local Hardware That Matches (2026)
- Best Budget Gaming Laptops of 2026: Buyer's Guide
- Fix Windows 98 SE on 1GB+ RAM: The Vcache Gotcha
- Ryzen 7 5800X vs 5700X for Streaming and Gaming in 2026
- GPT-5.6 Sol at One-Third the Cost: When Local Inference Still Wins
- Sound BlasterX G6 for Retro DOS and Win98 Gaming: Does a Modern USB DAC Fix the EAX Era?
- Running a Local LLM on a Raspberry Pi 4 Cluster — Realistic Expectations for 2026
- Can a Ryzen 5 5600G Run Local LLMs With No GPU? CPU + iGPU Inference Tested
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090