USB Male to DB15 15-Pin Male RS232 Communication Cable 1.8 Meters for YOKOGAWA Servo Driver
Bottom line: The USB Male to DB15 15-Pin Male RS232 Communication Cable 1.8 Meters is a specs-and-price decision rather than a crowd-consensus one in the cables & connectors category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by RIKYJIC's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored USB Male to DB15 15-Pin Male RS232 Communication Cable 1.8 Meters using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. RIKYJIC's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- [RS232 chip ensures reliable communication]: High-performance USB-to-serial port chip is used to provide stable RS232 communication for YOKO-GAWA servo drive, error-free data transmission, and accurate operation of industrial automation control system.
- [Plug-and-play DB15 connector]: Customized 15-pin DB15 interface seamlessly connects to YOKO-GAWA servo drive, plug-and-play design simplifies installation steps, no additional driver is required, and work efficiency is improved.
- [Optimized RS232 communication protocol]: RS232 communication technology optimized for industrial environment enhances signal integrity, effectively suppresses noise interference, and ensures data integrity and high-speed communication in cable transmission up to 1.8 meters.
- [Solid and durable, industrial-grade construction]: High-quality shielded wire and reinforced insulation layer are used, which are resistant to pulling and bending, adapt to harsh industrial environment, and extend service life. It is an ideal choice for harsh working conditions.
Full Specifications
| Brand | RIKYJIC |
|---|---|
| Cable Type | Composite |
| Connectivity | USB |
| Connector Type | Composite |
| Special Feature | Data Transfer, Weatherproof |
| Compatible Devices | YOKOGAWA Servo Driver |
Ready to buy?
USB Male to DB15 15-Pin Male RS232 Communication Cable 1.8 Meters for YOKOGAWA Servo Driver is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Period-Correct 1999 LAN Rig: Pentium III, Voodoo3 3000, Sound Blaster
- llama.cpp vs Ollama on an RTX 3060: Which Runs GLM-5.2 Faster?
- Voodoo 5 6000 Verdict: What the Lab Established and Tests Next
- A LEGO Castle Case for the Raspberry Pi 5 Is Going Viral — Here's the Build
- Best Racing Wheel for Forza Horizon 6 on PC (2026)
- AI-Driven Driver Hunt: Installing Vintage Sound Cards on Windows 98 With Claude
- Best Budget Local-AI Workstation Parts in 2026: 5 Picks
- Sub-$300 4K Mini-LED Gaming Monitors Hit the Mainstream
- Claude Opus 4.8 Raised the Bar — Best Local Coding LLMs for a 12GB RTX 3060
- Asus ROG Xreal R1 Brings 240 Hz to AR Glasses — What PC Gamers Should Know
- Best Budget Gaming CPU Under $250 in 2026
- Home Assistant on a Raspberry Pi 4 8GB: Full 2026 Setup
- Best 4K Monitor for an RTX 3060 12GB: KOORUI vs Samsung Odyssey
- Raspberry Pi 4 8GB vs Pi Zero W: Which Fits Your First Project?
- RTX 3060 12GB vs RTX 4090 for Local LLMs (2026): Is 2x VRAM Worth the Price Jump?
- Build or Buy a Gaming PC in 2026? The Real Tradeoffs
- Noctua NH-U12S vs DeepCool AK620 on Ryzen in 2026: Honest Pick
- Best 1440p 240Hz Gaming Monitors in 2026
- Best SSD for a Retro PC Build: CompactFlash vs SATA in 2026
- Noctua-Style Raspberry Pi 5 NAS Build Goes Viral — What Pi 4 Owners Can Borrow
- Best NVIDIA RTX 3060 Graphics Cards in 2026: 5 AIB Picks Compared
- Perplexity's Local-or-Cloud Router: What Hardware Runs the Local Half
- Best PC Gaming Peripherals in 2026: 5 Picks for Keyboard, Audio, and Control
- Best SSD for Steam Deck OLED Expansion in 2026: SATA Adapter vs M.2 2230
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090