Silicone Rubber Push-in Feet 5/16" Hole
Bottom line: The Silicone Rubber Push-in Feet 5/16" Hole is a specs-and-price decision rather than a crowd-consensus one in the retro cases & modding category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by Generic's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Silicone Rubber Push-In Panel Feet – Compression Stem Design These push-in silicone rubber feet install into pre-drilled panel holes using a compression-style stem, creating a secure, tool-free fit that stays seated under vibration and repeated use. Designed for electronics enclosures, control cabinets, audio equipment, appliance housings, and benchtop equipment, they function as both protective bumpers and stand-off feet. Silicone rubber provides non-marking contact, vibration damping, noise reduction, and long service life in shop, electronics, and equipment environments. Common…
SpecPicks Verdict
SpecPicks scored Silicone Rubber Push-in Feet 5/16" Hole using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cases & modding category. Generic's retro cases & modding lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cases & modding of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Secure Push-In Fit Compression stem design installs into pre-drilled holes for a tight, tool-free fit that stays seated under vibration and repeated use.
- Silicone Rubber Performance Made from 60 Shore A silicone rubber for non-marking contact, vibration damping, and long service life in demanding shop and equipment environments.
- Protects Surfaces & Equipment Acts as a bumper and stand-off foot to prevent metal-to-metal contact, reduce noise, and protect panels, enclosures, and work surfaces.
- Ideal for electronics enclosures, audio equipment, control cabinets, benchtop equipment, rack systems, fabrication projects, and repair applications.
- Wide Temperature Performance Silicone rubber remains flexible across a broad temperature range and resists hardening, cracking, and compression set in demanding environments.
- Dimensions & Fitment Fits 5/16" panel holes with a 1/2" head diameter and 1/4" installed height. Compression stem design provides a secure push-in fit for electronics, audio equipment, control panels, and enclosure applications.
Full Specifications
| Brand | Generic |
|---|---|
| Color | Black |
| Shape | Round |
| Material | Silicone Rubber |
| Unit Count | 1.0 Count |
| Fixture Type | Push-in |
| Model Number | B8.7 |
| Grip Material | Rubber |
| Material Type | Silicone Rubber |
| Number of Items | 8 |
| Number of Pieces | 8 |
| Vibration/Rumble | Yes |
| Included Components | Rubber Push-In Feet Bumpers |
| Surface Recommendation | All hard surfaces including metal, wood, plastic, and composite equipment bases |
| Manufacturer Part Number | B8.7 |
| Recommended Uses For Product | Audio equipment, Computers, Control Cabinets, Electronics, Equipment Enclosures |
| Item Dimensions L x W x Thickness | 0.5"L x 0.5"W x 0.62"Th |
| Full listing title | Silicone Rubber Push-in Feet 5/16" Hole, 1/2" OD x 1/4" Tall Panel Bumpers for Electronics Enclosures, Audio Equipment, Control Cabinets, Appliances & Equipment Repair, 8 Pack |
Ready to buy?
Silicone Rubber Push-in Feet 5/16" Hole, 1/2" OD x 1/4" Tall Panel Bumpers for Electronics Enclosures, Audio Equipment, Control Cabinets, Appliances & Equipment Repair, 8 Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Cases & Modding
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget Gaming PC Parts in 2026: A Ryzen + RTX 3060 Build
- Qwen 3.6 35B-A3B KV Cache Deep Dive: Memory, PPL, and Quantization Tradeoffs
- GPU VRAM Guide: Running a 5GB TTS Model Locally
- How to run Qwen 3 32B on Apple M4 Pro
- Imaging Vintage IDE Drives in 2026: A CompactFlash + USB Adapter Workflow
- Best USB Microphone for Streaming Under $150 in 2026
- AVX-512 Speeds Linux Software RAID Up to 41% — What It Means for Your Homelab NAS
- Best Racing Wheel Under $300: Logitech G29 vs HORI Force Feedback
- CompactFlash as an IDE Drive: Silent, Period-Correct Storage for Win98 Rigs
- DFlash Speculative Decoding on Qwen3.5-35B-A3B: How an RTX 2080 Super 8GB Hits 60+ tok/s
- Best $1000 Prime Day Gaming PC: RTX 5060 Ti + 32GB RAM
- Can Local Qwen 3.6 Match Frontier Models at Canvas Code?
- Running Local LLMs on a Raspberry Pi 4 8GB: tok/s, Quantization, and What Actually Works
- CRT Monitor vs TV for Retro Gaming: Which Actually Looks Right?
- Best Budget CPU for 1080p Gaming: Ryzen 7 5700X vs 5800X vs i7-9700K
- What PC Specs Do Big YouTubers Actually Run in 2026?
- GPT-5.6 Sol Matches Fable 5 at 1/3 Cost: Local-Rig Fallout
- Building a 2001 Pentium III + GeForce 3 Win98SE Gaming Rig: A 2026 Build Log
- Best Budget FPS Mouse + Pad Combo: G502 Hero & QcK 2026
- Two GTX 1050 Ti 4GB vs One RTX 3060 12GB for 8B Local LLMs
- Linux 7.3: 'Flatten the Pick' Scheduler Gains for Gaming
- Kimi K3 Scores 57 on Intelligence Index at $0.94/Task
- Ryzen 5 2600 vs Ryzen 7 5800X: Is the AM4 Upgrade Worth It?
- Lenovo G02 Retro Handheld Reportedly Ships Preloaded With Pirated Games
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090