NZXT Control Hub
Status: NZXT Control Hub - Digital RGB Lighting and PWM…: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The NZXT Control Hub: Runs up to 5 PWM fans or 4 NZXT RGB Core Single-Frame Fans from one hub; main trade-off: setup and control depend on NZXT CAM software.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Runs up to 5 PWM fans or 4 NZXT RGB Core Single-Frame Fans from one hub
- ✓ 8-pin PWM + RGB combo headers mean one cable per single-frame fan unit
- ✓ Zero RPM mode stops fans at low loads for silent idle
- ✓ Syncs lighting effects across up to 5 NZXT RGB components
- ✓ Mounts magnetically or with the included 3M Dual Lock fasteners
Cons
- ✗ Setup and control depend on NZXT CAM software
- ✗ Lighting sync limited to NZXT RGB components
- ✗ Caps at 4 single-frame fans, one fewer than its PWM fan limit
- ✗ Five-fan ceiling may require a second hub in high-airflow builds
Manufacturer description
The NZXT Control Hub (model AC-CRFR1-B1) gives you one compact controller for fan speed and RGB lighting across your whole build. It runs up to five PWM fans, or up to four NZXT RGB Core Single-Frame Fans. Its 8-pin combo headers carry both PWM and RGB signals, so each single-frame fan unit needs one cable instead of separate fan and lighting leads. You control everything through NZXT CAM software, which detects each connected device automatically. In CAM you can fine-tune fan speeds, save custom profiles, and turn on Zero RPM mode, which stops the fans during low loads so the system stays…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for NZXT Control Hub, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "Runs up to 5 PWM fans or 4 NZXT RGB Core Single-Frame Fans from one hub"; the main trade-off is "Setup and control depend on NZXT CAM software". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How many fans can the NZXT Control Hub control?
It controls up to five PWM fans, or up to four NZXT RGB Core Single-Frame Fans, using its 8-pin PWM and RGB combo headers.
Do I need software to use the NZXT Control Hub?
Yes. Fan speeds, lighting effects and custom profiles are managed in NZXT CAM software, which automatically detects each connected device.
Can the NZXT Control Hub stop my fans when the PC is idle?
Yes. It supports Zero RPM mode, which stops connected fans during low loads for silent operation.
How many RGB devices can it sync?
The hub synchronizes lighting effects across up to five NZXT RGB components. The listing specifies NZXT RGB components, so check the product listing before connecting third-party lighting.
How do I mount the NZXT Control Hub inside my case?
You can attach the controller magnetically, or use the included 3M Dual Lock Reclosable Fasteners to fix it to a surface inside the case.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- IDEAL FOR SINGLE-FRAME FANS - Conveniently operate a full build of RGB Core Single-Frame Fans using the 8-pin PWM and RGB combo headers.
- PRECISE FAN CONTROL - Fine-tune speeds for up to five PWM fans (including single-frame fan units), with Zero RPM mode for silent operation during low loads.
- SYNCHRONIZED RGB LIGHTING - Synchronize lighting effects on up to five NZXT RGB components to create a cohesive, system-wide look.
- POWERED BY CAM - Adjust fan speeds, personalize lighting, and create custom profiles via NZXT CAM software, which automatically detects each connected device.
- EASY INSTALLATION - Secure the controller magnetically or use the included 3M Dual Lock Reclosable Fasteners.
Full Specifications
| Brand | NZXT |
|---|---|
| Model | AC-CRFR1-B1 |
| Voltage | 12 Volts |
| Material | Plastic |
| Unit Count | 1.0 Count |
| Noise Level | 36 Decibels |
| Part Number | AC-CRFR1-B1 |
| Material Type | Plastic |
| Cooling Method | Fan |
| Number of Items | 1 |
| Number of Packs | 1 |
| Compatible Devices | Desktop |
| Included Components | User Manual |
| Power Connector Type | 8-Pin |
| Warranty Description | 2 Year Manufacturer |
| Full listing title | NZXT Control Hub - Digital RGB Lighting and PWM Fan Speed Controller - Control Up to 5 x PWM Fans or 4 x NZXT Single-Frame Fans - Powered by NZXT CAM Software |
Ready to buy?
Amazon shows no buyable offer for NZXT Control Hub - Digital RGB Lighting and PWM… at the last check. An Amazon search for this model lists current offers. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Genesis Mini vs SNES Classic vs Raspberry Pi 4: Which Retro Setup Wins in 2026?
- Reve 2.0 Debuts at #2 for Text-to-Image: Can You Run Local Image Gen on an RTX 3060?
- Intel Arc B50 for Stable Diffusion vs RTX 3060 12GB: Which Wins in 2026
- RTX 5070 Ti vs RTX 5080: Is the $250 MSRP Step-Up Worth It at 1440p and 4K?
- Build a Jellyfin Media Server on a Raspberry Pi 4 8GB in 2026
- Voodoo5 5500 PCI Boots on a Modern Z77 Board: Retro-on-Modern Just Got Easier
- Best SSD for a Raspberry Pi 4 Media Server in 2026
- How to run Qwen 3 14B on NVIDIA GeForce RTX 3090
- Simba 3.2 Tops the TTS Leaderboard: Run Local Text-to-Speech on an RTX 3060 12GB
- Samsung 27" 1440p 240Hz Gaming Monitor Drops to $169 in 2026 Deal
- Microsoft's Copilot Goes Agentic — Run Your Own Agent Locally on an RTX 3060
- CompactFlash Imaging for Retro PCs: A CF133 + IDE Workflow
- Build a Real-Time Flight Tracker (ADS-B) on a Raspberry Pi 4 in 2026
- 3D Printed Glow-Spike Bracelet: Adafruit Builder's Guide 2026
- How to Identify Any Vintage GPU: A Visual + GPU-Z Guide for Retro PC Builders
- Open-WebUI vs LM Studio: Best Local LLM Front-End in 2026
- MSI Raider 16 Max HX Review: Elite Gaming and Creator Power
- Late 2000s Windows XP Gaming PC Build: Parts & Setup Guide
- Forza Horizon 6 on Steam Deck: Best Dock and Controller Setup for 2026
- Best Local LLM You Can Run on 12GB of VRAM in 2026
- MiniMax-M3 Scores 55 on AA Index: Can You Self-Host It?
- Intel Arc A770 for Local LLMs: 2026 Benchmark Guide
- GPT-5.6 Sol at One-Third the Cost: When Local Inference Still Wins
- 8BitDo Pro 2 vs DualSense for PC Emulation: Which Controller Wins
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090