GL.iNet
GL.iNet GL-X2000 (Spitz Plus) Cellular Gateway 4G LTE Router for Home
Bottom line: The GL.iNet GL-X2000 Cellular Gateway 4G LTE Router for Home ($175.99 on Amazon as of 2026-10-06): CAT 12 modem with 3-carrier aggregation (DL 3CA) for faster LTE downloads; main trade-off: dual-SIM is single standby, so only one SIM is active at a time.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ CAT 12 modem with 3-carrier aggregation (DL 3CA) for faster LTE downloads
- ✓ Wi-Fi 6 at 574Mbps on 2.4GHz plus 2402Mbps on 5GHz (local-network tested)
- ✓ WireGuard hits 190Mbps; OpenVPN preinstalled with 30+ VPN services supported
- ✓ Dual-SIM single standby lets you switch between the stronger AT&T or T-Mobile signal
- ✓ Four SMA connectors accept external antennas for weak-signal RV and rural setups
Cons
- ✗ Dual-SIM is single standby, so only one SIM is active at a time
- ✗ OpenVPN throughput caps at 30Mbps, far below the WireGuard 190Mbps figure
- ✗ Cellular function is restricted in Russia, Belarus, Cuba, Iran, North Korea, Syria, Crimea
- ✗ North America only, so the listed IoT certifications do not help overseas travelers
SpecPicks Verdict
SpecPicks scored GL.iNet GL-X2000 Cellular Gateway 4G LTE Router for Home using a rating × review-volume × price-fit model applied to published specs and reviews across the networking category. GL.iNet's networking lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for networking of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【Fast Wi-Fi 6, 3000M wireless speed】GL-X2000 provides reliable cellular networks for remote access and high speed internet in urban areas with up to 574Mbps (2.4GHz) + 2402Mbps (5GHz) Wi-Fi speeds.*Speed Tests conducted on a local network. Real world speeds may differ depending on your network configuration.
- 【Dual-SIM with Single Standby】Dual-SIM flexibility for selecting the stronger and faster ISP connection, AT&T & T-Mobile certificated while supporting Network Failover and the option to configure Failover priorities among multiple connection methods.
- 【Multi-WAN】Spitz Plus' cellular 4G router with multi-WAN technology lets users utilize multiple connection methods, including Ethernet, Repeater, Cellular, and Tethering; Load-balancing capabilities let users distribute bandwidth by custom proportion among multiple connection methods.
- 【VPN Tunnelling & Remote Access】Provides pre-installed OpenVPN and WireGuard to support 30+ VPN services and encrypts all network traffic within the connected network so that the network is secured when connecting to a public Wi-Fi. Max. VPN speed of 30 Mbps (OpenVPN); 190 Mbps (WireGuard) *Speed Tests conducted on a local network. Real world speeds may differ depending on your network configuration.
- 【Interchangeable SMA Connectors】The GL-X2000 features four SMA connectors, allowing for the integration of multiple external antennas to enhance the device's performance across various application scenarios.
- 【4G LTE CAT 12】The Split Plus leverages DL 3CA technology for three-carrier aggregation, significantly enhancing download and upload speeds by increasing bandwidth availability, resulting in improved coverage, faster speeds, and greater reliability on the 4G network.
Full Specifications
| Brand | GL.iNet |
|---|---|
| Color | White |
| Weight | 4g |
| Coverage | Wide coverage, both rural and urban |
| Frequency | 5 GHz |
| Model Name | Spitz Plus |
| Antenna Type | Fixed |
| Connectivity | Wireless, WiFi, 2.4GHz |
| Model Number | GL-X2000-AU |
| Built-In Media | Ethernet Cable, GL-X2000 router with 2-year warranty, Power Adapter, User Manual, Wall Mount Kit |
| Control Method | App, Push Button |
| Connection Type | Wireless |
| Controller Type | Multi-WAN (Ethernet, Cellular, Tethering) |
| Mfr Part Number | GL-X2000-AU |
| Number of Ports | 1 |
| Special Feature | Access Point Mode, Guest Mode, Internet Security, QoS |
| Antenna Location | Business, Home |
| Wi-Fi Generation | Wi-Fi 6 |
| Security Protocol | WPA2, WPA3 |
| Compatible Devices | Personal Computer, Smartphone, Tablet |
| Full listing title | GL-X2000(Spitz Plus) Cellular Gateway 4G LTE Router for Home, RV, Road trips, Offices, CAT 12, Wifi 6 Router, Detachable Antennas, Dual-SIM, T-Mobile & AT&T IoT Certified, OpenVPN, WireGuard (NA Only) |
Ready to buy?
GL-X2000(Spitz Plus) Cellular Gateway 4G LTE Router for Home, RV, Road trips, Offices, CAT 12, Wifi 6 Router, Detachable Antennas, Dual-SIM, T-Mobile & AT&T IoT Certified, OpenVPN, WireGuard (NA Only) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Networking
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Best CPU Coolers for AMD Ryzen in 2026: 5 Picks Ranked
- Best Storage for a Windows 98 Retro PC: CompactFlash vs IDE-to-USB SSD Adapters
- Best Budget Upgrades to Revive an Old Gaming PC in 2026
- RTX 3060 12GB vs RTX 4060 Ti 16GB for Qwen2.5-Coder 14B (2026)
- Building a Period-Correct 2001 GeForce 3 Windows 98 SE Rig — With a CompactFlash Boot Drive
- Best 27-Inch 4K Gaming Monitor: KOORUI QD-Mini LED vs Samsung Odyssey
- This DIY 'Steam Controller Puck' Emulates Xbox, Switch & PS Pads
- SANSUI vs KOORUI 27" 4K: Which Budget 4K Gaming Monitor Wins?
- Best PC and Emulation Controllers in 2026
- Raspberry Pi Pico SDK 2.3.0 Ships: What Changed
- RTX 3060 12GB vs Arc B580 12GB for Local LLMs in 2026
- Gemini 3.6 Flash vs 3.5 Flash-Lite: Cloud Tier or Local RTX 3060?
- Running a Local Coding Agent on an RTX 3060 12GB: Qwen3-Coder in Practice
- Build a Jellyfin Media Server on a Raspberry Pi 4 8GB: Measured Perf
- Logitech G920 vs HORI Racing Wheel: Best Beginner Sim Setup (2026)
- AMD Ryzen AI Max+ 395: The 128GB Mini PC Running 70B LLMs Locally
- Sound BlasterX G6 for Retro Gaming PC Audio in 2026
- Best Gaming Gifts Under $60 in 2026
- Can Local LLMs Actually Do Anything Useful?
- Ryzen 7 5800X vs 5700X for 1080p Gaming: Which AM4 Chip Wins in 2026?
- How to Image a 90s Big-Box CD-ROM to CompactFlash for IDE-Adapter Retro PCs
- Ryzen 7 5800X3D vs Intel Core i7-14700K for DDR4 Gaming
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: Real Performance
- Building a Local LLM Workstation on a Raspberry Pi 5 + Ryzen 7 5800X Hybrid
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090