suptek
suptek Single Monitor Mount Gas Spring Arm Mount with Base
Bottom line: The suptek Single Monitor Mount Gas Spring Arm Mount with Base is a specs-and-price decision rather than a crowd-consensus one in the home & kitchen category, priced around $43.99 on Amazon as of 2026-10-07. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by suptek's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored suptek Single Monitor Mount Gas Spring Arm Mount with Base using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. suptek's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Fits 35" Screens - Suptek monitor mount ideal for most screens up to 35" and 24.25lbs with 75x75mm or 100x100mm backside mounting holes.
- Ergonomic Design -The single tabletop monitor mount is equipped with a high-quality gas spring device, allowing you to flexibly adjust the angle and height of the single desk monitor arm mount stand,rotate 360°, tilt ±80° up and down, swivel ±180° left and right.Adjust the screen in the most comfortable position, release pressure from the neck and shoulders and maintaining good vision.
- No Drilling Required - Unlike C-clamps or grommet bases, the freestanding desktop monitor stand utilizes a large wooden base that requires no drilling for installation and will not damage your desktop. Simply place it on your desk for flexible adjustments and movement for a more comfortable workspace.The freestanding monitor mount base measures 53.5 cm(L) x 33 cm(W) and features bottom side padding.
- Unique Storage Slot Design - The unique slot design can accommodate tablets, phones, pens, sticky notes, and other office supplies. Help you get rid of messy desks and keep your workspace tidy.
- Easy to Install - Step-by-step user manual and organized hardware kit for hassle free mounting.If you have any problems during the installation process or product selection,you can contact our customer service team in a timely manner.
Full Specifications
| Brand | suptek |
|---|---|
| Color | Black |
| Material | Alloy Steel |
| Unit Count | 1 Count |
| Mounting Type | Tabletop Mount |
| Movement Type | Rotate, Swivel, Tilt, Articulating |
| Number of Packs | 1 |
| Compatible Devices | Monitor |
| Enclosure Material | Alloy Steel |
| Maximum Tilt Angle | 90 degrees |
| Warranty Description | 2-Year warranty |
| Maximum-Supported Screen Size | 32 inches |
| Minimum-Supported Screen Size | 17 inches |
| Full listing title | suptek Single Monitor Mount Gas Spring Arm Mount with Base,Free standing Pneumatic Height Adjustable Monitor Desk Stand for 17 to 35 inch,Holds up to 24.25lbs,Black(ML8XC) |
Ready to buy?
suptek Single Monitor Mount Gas Spring Arm Mount with Base,Free standing Pneumatic Height Adjustable Monitor Desk Stand for 17 to 35 inch,Holds up to 24.25lbs,Black(ML8XC) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Mystery N64 Cartridge Found in the Woods Boots Up
- RTX 3060 Drop-In vs AM4 Rebuild for an i7-9700K in 2026
- Inside China's Mini PC Production: How They're Built
- Intel Arc Stable Diffusion Guide: Setup & Benchmarks 2025
- Ryzen 5 5600G for Local LLMs: iGPU + CPU Inference in 2026
- Jensen Huang Heads to Tokyo as Sega's 1996 Bet on Nvidia Is Remembered
- RTX 5090 AI Cores: What the Specs Actually Mean in 2026
- Can a Raspberry Pi 4 8GB Run a Local LLM with Ollama?
- Can a Raspberry Pi 4 Run a Local LLM? Ollama tok/s Tested
- Intel Core Ultra 5 250K Plus vs Ryzen 5 7600X3D: The Mid-Range Faceoff
- Anthropic Shutdown Reignites the AI-Sovereignty Debate — and the Case for Local Inference
- How to run Qwen 3 14B on NVIDIA GeForce RTX 3090
- Raspberry Pi Projects for Teens: Best Builds 2026
- GameSir G7 SE vs HORIPAD Pro: Best Wired PC Controller
- llama.cpp Vulkan vs CUDA on a 12GB RTX 3060: Which Backend Wins?
- Started a Homelab a Month Ago — Is a Ryzen 5 5600G Enough?
- Best SSDs for a Raspberry Pi homelab NAS in 2026
- Best Streaming Microphone for Twitch and YouTube in 2026
- Mini-ITX Gaming PC in a 3D Printed Case: 2026 Builder's Guide
- Intel Arc Pro B70 + llm-scaler-vllm 1.4: Is It the New Budget Inference King?
- 9800X3D Build: RTX 5080 vs 5070 Ti vs 9070 XT at 1440p
- ProgramBench: Can LLMs Rebuild Programs From Scratch?
- How to run Llama 3.1 70B on Arc B580
- How to Install Windows 98 SE on a CompactFlash Boot Drive in 2026 (Retro PC Build Guide)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090